LS1 Swap Corvette Fuel Filter Install.
#1
Junior Member
Thread Starter
Join Date: May 2011
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 RS and 1991 RS
Engine: LS1 and 350
Transmission: auto and manual
LS1 Swap Corvette Fuel Filter Install.
Ok so i bought a vette fuel filter and the fittings from a guide i found on here but the problem im running into is this. on the one side of the fuel filter there is 1 fitting and on the other side there are 2 fittings where am i getting the 2nd line from and where is that 2nd fitting / line supposed to go. i cant find any threads on a full install for this filter nor can i find any good pics that will answer my question.
Almost forgot this is for a 1990 v6 swapped camaro with the 3rd gen tank in it still.
If any one can answer this and or show me some pics for this as well i would greatly appreciate it.
Almost forgot this is for a 1990 v6 swapped camaro with the 3rd gen tank in it still.
If any one can answer this and or show me some pics for this as well i would greatly appreciate it.
#2
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
The end with the two fittings has the supply and return on it, and the other end has the outlet to the engine.
The supply from the tank is the outer fitting. Connect the return in the middle to the 5/16" return line.
The supply from the tank is the outer fitting. Connect the return in the middle to the 5/16" return line.
#5
Supreme Member
iTrader: (5)
Join Date: Aug 2011
Location: Jackson NJ
Posts: 1,178
Received 156 Likes
on
100 Posts
Car: 1984 T/A
Engine: LQ4
Transmission: T56
Axle/Gears: Ford 8.8 4.10 gears
Re: LS1 Swap Corvette Fuel Filter Install.
im using the vette filter as well with stock fuel lines. I can take some photos/ part numbers if needed.
#6
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
It appears that is one thing I didn't take a picture of. (I was in a pretty big toot to get the install done 4 years ago...)
Trending Topics
#9
Supreme Member
iTrader: (5)
Join Date: Aug 2011
Location: Jackson NJ
Posts: 1,178
Received 156 Likes
on
100 Posts
Car: 1984 T/A
Engine: LQ4
Transmission: T56
Axle/Gears: Ford 8.8 4.10 gears
Re: LS1 Swap Corvette Fuel Filter Install.
this is the filter i used that comes with the 6AN fittings
I have a tbi car but the stock hardline fittings were these:
9894DBHERL (1) - 14mm to -6AN
9894DBJERL (1) - 16mm to -6AN
I have a tbi car but the stock hardline fittings were these:
9894DBHERL (1) - 14mm to -6AN
9894DBJERL (1) - 16mm to -6AN
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
92camaroJoe
Tech / General Engine
6
08-13-2015 06:07 AM