6.0 fitment in my '89 w/pics
03-29-2015, 07:15 PM
#1
6.0 fitment in my '89 w/pics
Okay, so I set the mock up combo down in and I know I have some tweaking to do left to right, but I'd like to know if this seems more forward than normal. Not that I wouldn't mind knowing this is typical, especially since I'm running a 4L80e and that requires some fab work, so the further forward the better it seems.
I'm running the UMI K member with their LSx stands and GM clamshells on the engine side. I'm also running the MuscleRods mid length headers and the pass side is just touching the rear lower control mount, so moving it(engine) rearward should solve that problem.
opinions?
I'm running the UMI K member with their LSx stands and GM clamshells on the engine side. I'm also running the MuscleRods mid length headers and the pass side is just touching the rear lower control mount, so moving it(engine) rearward should solve that problem.
opinions?
Thread
Thread Starter
Forum
Replies
Last Post
86White_T/A305
Third Gen Association of Ontario
0
09-21-2015 05:28 PM