mac86

iTrader: (1)

i decided to restore my tail lights. they were faded, scratched, and yellowed grid tail lights. and the reflective area of them on the inside was peeling. i took them apart and repainted the inside of them..


i then sanded the tail lights with 800 grit sandpaper to rough them up.
and after a fill 2 hours of masking the tail light lenses, i painted the black areas, and then removed the masking, and applied 3 light coats of clearcoat, and one heavy one. i let them bake in the sun when it was 80 degrees out yesterday for 3 hours, and then hosed them off with cold water. here is what i got. i still am going to wetsand them with 1000 grit and 2000 grit and then polish them with mothers california gold wax for that amazing mirror finish. here is before i polish them:



i am also going to paint the inside of the turn signal lense red. probably today i am going to finish them off. ill post more pics of when they r done. im going for show car quality tail lights.

ImBrandon

Looks professional

mac86

iTrader: (1)

thanks. ill post progress and finished pics by the end of the week

Javier87z28

iTrader: (1)

Nice job man i had actually been considering redoing mine as well

mac86

iTrader: (1)

i painted the lenses red from thee inside. it looks like it was red from the factory. im suprised at how good it looks. paint is drying, then i will put them together and take some pics. im using mothera california gold to wax them

!CamaroDave

iTrader: (3)

Dang those look really good!

mac86

iTrader: (1)

camera not so good, crappy lighting, but here they are finished. putting them on the car tomorrow. they look 20 times better in person. i think ill hav to come to the meets sometime if u guys wanna see it in person. here it is. note the similarity in color. so close its hard to tell the difference.







it will look so much better in natural light( the sun) instead of bar lights. ill take some pics of them on the car if its sunny out tomorrow

mac86

iTrader: (1)

got em on the car today. im really satisfied with the turn out







[hr]

now with the blinkers lit

Javier87z28

iTrader: (1)

Very nice man and nice hood ive been looking for one of those

mac86

iTrader: (1)

u cant go wrong with a daytona hood and hawks 5 inch spoiler. its great combo

Javier87z28

iTrader: (1)

have to agree ive been looking for one with no luck, local guy is selling a 90rs body only with the hood for 600 but wont sell the hood alone

Javier87z28

iTrader: (1)

How much do those hoods usually sell for if anyone knows?

red rock

iTrader: (2)

Hawks hood. http://www.hawksthirdgenparts.com/pr...urbo-Hood.html

mac86

iTrader: (1)

i might start selling restored tail lights. i remind you. i did not paint mine in a booth. it was outdoors, so they may not be absoloutely perfect, but they will look great just like mine if not better. i want to see if anyone would be interested in these. here is the pricing:]
(camaro and trans am tails)
$200+ shipping for a set of regular refurbished taillights
$220+ shipping for refurbished ones with red turn signal taillights
$220+ shipping for refurbished tinted regular taillights
$240+ shipping for refurbished tinted, red turn signal taillights.

who would be interested for that price???

RSFreak

Would that price include the tail lights them selves, or would I need to send you my originals?

mac86

iTrader: (1)

it would include tail lights

mac86

iTrader: (1)

if people would be interested, i will invest in a new paint gun and some nice professional paint and clearcoat and do them like that instead of rattle cans which is what i used on mine.
i will also make a small paint booth to paint them in so they are not exposed to any dust

86T/A_Ram_Air

I have to admit im not normally a fan of that hood however it works on your car. tail lights look great

LHernandezJr

...

Jonesyfxr

iTrader: (2)

I just tried pulling my tai lights apart and it seems like they wanted to break, so I gave up. I polished them up with Mothers mag and aluminum polish. I've found this stuff works great on lenses.

haro_is_king

Hey mac , what tape did you use to mask off the lights and how soon did you pull the tape after you sprayed? Thanks .....i shot the black on mine and let em sit overnight and was saddened when i removed the tape and it peeled the corners of the black off....thanks again

mac86

iTrader: (1)

i used the blue painters tape to mask them. pulled the tape off after like 20 minutes

haro_is_king

Thanks, did u spray em with a flat black then gloss clear or both glossy? Thanks again

Edwardgp

Nice detail work.

Louis_84

Those look real nice. Makes me want to do something with one of the 3 sets of taillights I have laying around. I have those same tires on my camaro. They are real slippery in the rain i think.