I am strapped for cash right now and I really want to put some headers on the car.
They have some flowtech headers at Advance Auto for about $100.00. Will these bolt to my y-pipe? Some exuast shops want about $200 for a custom y-pipe.
I just want some cheap headers for the LG4. When I get a 350, then I'll spend the cash for a complete 3" system.
Thanks

------------------
Zepher
'86 Pontiac Trans Am WS6, LG4 305, 5 Speed, CF DF Clutch,
Edelbrock 1406 Carb, Edelbrock Performer RPM 7101 Intake Manifold.
Edelbrock Open Element Air Cleaner: Flowmaster Exhaust, 160* Thermostat,
Grant GT Steering Wheel, MSD HEI Coil, Taylor 8mm Wires, Leather 96 Camaro SS Seats,
Alpine CD+Changer,Alpine V12 Amps, Premier TS-1040C Subs, Polk Audio highs/mids.
Best ET: 14.94@91.67
High Speed Run: 157mph
WS6 Trans Am

 

I believe Dynomax makes headers now that bolt to the stock exhaust.Try Jegs,or Summit.

------------------
We need Perry Mason

 

My research for an emissions legal system indicates the wise course of action would be to get a complete header/y-pipe system. Size it for the 350 when you put it on the LG4; low end torque may suffer slightly, but the cost will definately be less doing it right the first time.

------------------
82 Berlinetta, orig V-6 car, now w/86 LG4/TH700R. 2.93 limited slip. Cat-back from '91 GTA, Accel HEI SuperCoil. AMSOIL syn lubes bumper-to-bumper. Daily driver, work-in-progress (LG4 w/LB9 block, ZZ3 cam and intake, WP 305 heads ported & polished, Hooker headers & y-pipe, 3" Catco cat).
57 Bel Air, my 1st car. 0.030 over 396, Weiand Action+, Edelbrock 1901 Q-Jet, Jacobs Omnipack, 1-3/4" headers, TH400 w/TCI Sat Night Special conv & Trans-Scat shift kit, 3.08 8.2" 10-bolt w/Powertrax, AMSOIL syn lubes bumper-to-bumper. Best 15.1 @ 5800' Bandimere. Daily driver while Camaro was being put together.

 

I do not believe there are any because looking at the position of the stock Y-pipe the primaries on the headers would be very short. Do yourself a favor and buy either a prefabbed Y-pipe and headers or pay a shop to make you a custom Y-pipe (mine only ran me $100).

------------------
1984 WS6 Trans Am Hartop
Former L69 Car under restoration
1984 Trans Am T-tops
4-bolt main 350, performer intake, headers, Holley 650, T-5, hayes clutch, dual elec. fans and 3.23's.
Daily driver and restoration
13.98 @ 101

 

Thanks for the advice, guys.
I hope I can get these on before March 17th, we are heading to the track that day and I would love to get into the lower 14's.

------------------
Zepher
'86 Pontiac Trans Am WS6, LG4 305, 5 Speed, CF DF Clutch,
Edelbrock 1406 Carb, Edelbrock Performer RPM 7101 Intake Manifold.
Edelbrock Open Element Air Cleaner: Flowmaster Exhaust, 160* Thermostat,
Grant GT Steering Wheel, MSD HEI Coil, Taylor 8mm Wires, Leather 96 Camaro SS Seats,
Alpine CD+Changer,Alpine V12 Amps, Premier TS-1040C Subs, Polk Audio highs/mids.
Best ET: 14.94@91.67
High Speed Run: 157mph
WS6 Trans Am