Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!

Blue valve covers?

Thread Tools
 
Search this Thread
 
Old 08-07-2015, 10:09 PM
  #1  
Junior Member
Thread Starter
 
mustangman65_79's Avatar
 
Join Date: Apr 2015
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 Iroc
Blue valve covers?

When I bought the car, I was told that it had a 350. I looked up the car, and only a 305 is stock.

But the thing that gets me is, it has blue valve covers. Like ford blue. Is this stock? Or maybe is the motor out of another car/truck?

How can I find out what motor it has and if it is stock or not?
Old 08-07-2015, 10:27 PM
  #2  
Member
iTrader: (11)
 
Ty92Z's Avatar
 
Join Date: Feb 2015
Location: Fayetteville, NC
Posts: 340
Received 11 Likes on 8 Posts
Car: 1992 Z28 1991 RS
Engine: LB9 LO3
Transmission: 5 speeds
Re: Blue valve covers?

Look for your rpo codes and that will tell you what it was born with. Check the casting number on the back of the block and that will tell you what block you have. You can pull a valve cover and the casting number will tell you what heads you have. As far as the blue valve covers, I guess the previous owner wanted blue valve covers so he sprayed them blue.
Old 08-07-2015, 10:56 PM
  #3  
Junior Member
Thread Starter
 
mustangman65_79's Avatar
 
Join Date: Apr 2015
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 Iroc
Re: Blue valve covers?

Originally Posted by Ty92Z
Look for your rpo codes and that will tell you what it was born with. Check the casting number on the back of the block and that will tell you what block you have. You can pull a valve cover and the casting number will tell you what heads you have. As far as the blue valve covers, I guess the previous owner wanted blue valve covers so he sprayed them blue.
Code and vin both say 305

Found a pic here, that looks exactly like my car.

Old 08-07-2015, 11:14 PM
  #4  
Supreme Member

iTrader: (3)
 
TylerSteez's Avatar
 
Join Date: May 2013
Location: CT
Posts: 1,393
Received 54 Likes on 38 Posts
Car: 86 Trans Am WS6
Engine: 383 stroker
Transmission: Dynamic Racing Reverse Manual 700r4
Axle/Gears: 9 Bolt 3.45
Re: Blue valve covers?

Either he bought blue valve covers or he painted them himself, they won't tell you anything about what block is in it. As the others said, the casting number on the block is the best bet at knowing what size motor you have.
Old 08-08-2015, 01:18 AM
  #5  
Supreme Member

iTrader: (13)
 
Night rider327's Avatar
 
Join Date: Dec 2002
Location: Bowdon, GA.
Posts: 2,535
Likes: 0
Received 16 Likes on 14 Posts
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Blue valve covers?

It's a valve cover... It comes off, can be swapped out, replaced, painted, etc. No they are not blue stock.

Chevy did use a light blue engine color in the late 70's though.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
2
09-28-2015 12:35 AM
Gunsbee
Electronics
4
09-07-2015 07:10 PM
Hotrodboba400
Firebirds for Sale
0
09-02-2015 07:28 PM
1Aauto
Sponsored Vendors
0
09-02-2015 01:50 PM



Quick Reply: Blue valve covers?



All times are GMT -5. The time now is 12:42 AM.