Go Back   Third Generation F-Body Message Boards > Regional Boards > North East Region
Sign in using an external account
Register Forgot Password?

North East Region Regional Board for the North East. Topics like local car shows, cruise nights, good mechanics, machine shops, and so on.

Welcome to ThirdGen.org!
Welcome to ThirdGen.org.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!


Reply
 
Thread Tools Search this Thread
Old 02-05-2005, 12:42 AM   #1
Member
 
Join Date: Mar 2003
Location: Adams, MA
Posts: 118

Classifieds Rating: (0)
Send a message via AIM to RichSoucie
Attn. Massachusetts residents front plate petition.

if ya hate your front plate or if you just dont care sign the pettition http://www.petitiononline.com/mass/petition.html
__________________
Saturn Ion message board at http://forum.saturnveloce.com

Last edited by RichSoucie; 02-05-2005 at 12:45 AM.
RichSoucie is offline vBGarage Page   Reply With Quote
Old 02-08-2005, 08:38 PM   #2
TGO Supporter
 
nick418's Avatar
 
Join Date: Apr 2004
Location: MA
Posts: 4,227
Car: 91 Z28, 86 Vette, 04 Jeep, 03 C240
Engine: 350 TPI L98
Transmission: A4
Axle/Gears: 3.23

Classifieds Rating: (0)
Send a message via AIM to nick418
sweet im from mass and i have a 91 Z and i took my front plate off! looks soo much cleaner and better just signed in ONLY 7 PPL???!?!?!?!?

Last edited by nick418; 02-08-2005 at 08:41 PM.
nick418 is offline vBGarage Page   Reply With Quote
Old 02-08-2005, 09:10 PM   #3
Member
 
Join Date: Mar 2003
Location: Adams, MA
Posts: 118

Classifieds Rating: (0)
Send a message via AIM to RichSoucie
yeah i just started it not to long ago so tell your family and friends tell everyone
RichSoucie is offline vBGarage Page   Reply With Quote
Old 02-09-2005, 07:49 PM   #4
Member
 
Join Date: Mar 2003
Location: Adams, MA
Posts: 118

Classifieds Rating: (0)
Send a message via AIM to RichSoucie
can one of the mods make this a sticky
RichSoucie is offline vBGarage Page   Reply With Quote
Old 02-09-2005, 10:04 PM   #5
Member
 
Join Date: Apr 2004
Location: Massachusetts
Posts: 148
Car: 1986 Pontiac Firebird
Engine: 305 LG4
Transmission: T-5 NWC

Classifieds Rating: (0)
Send a message via AIM to '86Twins
9 names now. And I got it going out to all my mass friends.
'86Twins is offline vBGarage Page   Reply With Quote
Old 02-09-2005, 10:12 PM   #6
Member
 
Join Date: Mar 2003
Location: Adams, MA
Posts: 118

Classifieds Rating: (0)
Send a message via AIM to RichSoucie
thanks alot dude make sure you have them spread the word too
RichSoucie is offline vBGarage Page   Reply With Quote
Old 02-10-2005, 05:32 PM   #7
TGO Supporter
 
aaron7's Avatar
 
Join Date: Nov 2002
Location: Massachusetts, USA!
Posts: 2,873
Car: 89 MR2 SC / 89 MR2 MK1.5
Engine: 4agze / 3sgte
Transmission: manual / manual

Classifieds Rating: (4)
Send a message via AIM to aaron7
lol never had one before... but what the hey!
aaron7 is offline vBGarage Page   Reply With Quote
Old 02-11-2005, 06:43 PM   #8
Member
 
Join Date: Mar 2003
Location: Adams, MA
Posts: 118

Classifieds Rating: (0)
Send a message via AIM to RichSoucie
thanks for making it sticky
RichSoucie is offline vBGarage Page   Reply With Quote
Old 02-13-2005, 09:29 PM   #9
Senior Member
 
383backinblack's Avatar
 
Join Date: Nov 2002
Location: Don't be Scurred.......it's only a Camaro
Posts: 2,589
Car: '91 Camaro RS
Engine: 383 with AFR 210's F1R Procharged
Transmission: Tremec 600
Axle/Gears: moser 12 bolt, 4.11's 33 spline axl

Classifieds Rating: (0)
Send a message via AIM to 383backinblack
ya front plates suck......but if anyone thinks a petition is going to make the legislature change the MGL chapter 90 laws so people can take their front plate off.....

well you've lost your mind.
383backinblack is offline vBGarage Page   Reply With Quote
Old 02-16-2005, 03:16 AM   #10
TGO Supporter
 
nick418's Avatar
 
Join Date: Apr 2004
Location: MA
Posts: 4,227
Car: 91 Z28, 86 Vette, 04 Jeep, 03 C240
Engine: 350 TPI L98
Transmission: A4
Axle/Gears: 3.23

Classifieds Rating: (0)
Send a message via AIM to nick418
Quote:
Originally posted by 383backinblack
ya front plates suck......but if anyone thinks a petition is going to make the legislature change the MGL chapter 90 laws so people can take their front plate off.....

well you've lost your mind.

WERD...


i wish it can happen tho.. front plates BLOW
nick418 is offline vBGarage Page   Reply With Quote
Old 03-03-2005, 04:33 PM   #11
Senior Member
 
Join Date: Feb 2004
Location: Lowell, MA
Posts: 542
Car: 91 Formula, 95 GT
Engine: 5.7, 5.0
Transmission: T5, T5
Axle/Gears: 3.42:1, ???

Classifieds Rating: (0)
#49
91formulaSS is offline vBGarage Page   Reply With Quote
Old 03-07-2005, 12:29 PM   #12
Senior Member
 
Join Date: Sep 2004
Location: Acushnet,Ma
Posts: 514
Car: 92 Camaro (R)eally(S)tock
Engine: 305 TBI
Transmission: Auto 700r4

Classifieds Rating: (0)
Send a message via AIM to lxcamaroxl
#53

Dont have a front plate on.
lxcamaroxl is offline vBGarage Page   Reply With Quote
Old 05-01-2005, 12:34 AM   #13
Senior Member
 
Join Date: Jun 2003
Location: Massachusetts
Posts: 1,985
Car: candy blue 85 z28
Engine: 305 tpi LB9
Transmission: 700r4 crazy beefed up one
Axle/Gears: ones with teeth

Classifieds Rating: (0)
236

gotta check you list there are a couple double posts....
JeffW is offline vBGarage Page   Reply With Quote
Old 06-25-2005, 03:50 AM   #14
Junior Member
 
Join Date: Apr 2005
Location: Boston
Posts: 51
Car: 92 Camaro RS
Engine: 305, 5.0
Transmission: 700 r4, auto

Classifieds Rating: (0)
Send a message via AIM to rbeshadow
Front lisence plates definetly suck. I always wanted to get a nice billit grill, but it's not worth it if it's gonna have an ugly lisence plate over it.
rbeshadow is offline vBGarage Page   Reply With Quote
Old 06-29-2005, 07:52 PM   #15
Member
 
Join Date: Mar 2004
Posts: 420

Classifieds Rating: (0)
#321

I don't run a front plate either. When I went for an inspection, the guy at the garage tried to charge me 5 bucks to put it on for me and said he wouldn't do it with no front plate. I drove 5 feet out into the street and put it on, obviously to be removed after I passed the inspection.
rsn932 is offline vBGarage Page   Reply With Quote
Old 08-18-2005, 09:10 PM   #16
TGO Supporter
 
nick418's Avatar
 
Join Date: Apr 2004
Location: MA
Posts: 4,227
Car: 91 Z28, 86 Vette, 04 Jeep, 03 C240
Engine: 350 TPI L98
Transmission: A4
Axle/Gears: 3.23

Classifieds Rating: (0)
Send a message via AIM to nick418
Quote:
Originally posted by rsn932
#321

I don't run a front plate either. When I went for an inspection, the guy at the garage tried to charge me 5 bucks to put it on for me and said he wouldn't do it with no front plate. I drove 5 feet out into the street and put it on, obviously to be removed after I passed the inspection.

Im a Mass State Inspector.. And by law i cant even bring cars in the garage with no front plates and do a inspection ( red lettering)
nick418 is offline vBGarage Page   Reply With Quote
Old 09-07-2005, 09:24 PM   #17
Banned
 
Join Date: May 2005
Location: Blackstone Valley, Massachusetts
Posts: 120
Car: 1986 Iroc Z28
Engine: 5.0 TPI
Transmission: 700-R4

Classifieds Rating: (0)
Send a message via AIM to RedIrocZ86
i just got pulled over for not having one on it because i havent gotten it on yet since the accident the car was in before i bought it. i dont agree we need it
RedIrocZ86 is offline vBGarage Page   Reply With Quote
Old 09-07-2005, 09:26 PM   #18
Banned
 
Join Date: May 2005
Location: Blackstone Valley, Massachusetts
Posts: 120
Car: 1986 Iroc Z28
Engine: 5.0 TPI
Transmission: 700-R4

Classifieds Rating: (0)
Send a message via AIM to RedIrocZ86
i wasnt charged anything! i dont have a front plate although right now the car is off the road for now until i get my new interior and engine in but still they didnt charge me or give me any problems.. depends on who does your inspections i guess
RedIrocZ86 is offline vBGarage Page   Reply With Quote
Old 09-09-2005, 08:34 AM   #19
TGO Supporter/Moderator
 
anesthes's Avatar
 
Join Date: Jul 1999
Location: SALEM, NH
Posts: 6,170
Car: '79 Z28
Engine: 400 bored .060 over, forged
Transmission: T5
Axle/Gears: 3.73, 8.5" 10 bolt

Classifieds Rating: (5)
I just read the petition. I got a good laugh out of it.

"Additionally, police officers will be more productive in stopping dangerous motor vehicle violations such as drunk driving, reckless driving, speeding, etc., because their time won't be compromised by stopping or ticketing a Massachusetts motorist who simply did not have a front license plate on display."

Haha. I'm printing this out and showing it to all the guys in roll-call.

You kids are funny

"Law enforcement officials may be opposed to a measure abolishing the front license plate requirement, because they might believe that losing the extra plate will make it more difficult for them to do their jobs in the best possible manner. However, in the 20 or more states that have abolished the front license plate requirement, there is no evidence of a decline in public safety as a result of the plate removal."

Not sure where you pulled this hoagwash out of. A good percentage of felony arrests start with minor traffic violations, such as "failure to display plates", and "defective equipment".


-- Joe
__________________
1979 Z28 - 400 Block, .060 reverse domes, eagle SIR rods, forged crank, XR288HR cam, AFR 195 heads, T5 trans, 8.5" 10 bolt 3.73 gears.
anesthes is offline vBGarage Page   Reply With Quote
Old 09-13-2005, 01:32 PM   #20
Banned
 
Join Date: May 2005
Location: Blackstone Valley, Massachusetts
Posts: 120
Car: 1986 Iroc Z28
Engine: 5.0 TPI
Transmission: 700-R4

Classifieds Rating: (0)
Send a message via AIM to RedIrocZ86
well maybe if they did there job and wouldnt harass us things would be different. i saw a Honda Prelude doing 100 MPH down I-495 and a state trooper radar them and then saw a 1970 SS Chevelle and he was doing 75 MPH in a 65 MPH and got pulled over when the Import was going atleast 100 MPH.... why did the chevelle get pulled over? My friend has been harassed because he drives a chevelle, now he has a second car and its a Cavalier and hasnt been glanced nor pulled over once yet! cops need a life
RedIrocZ86 is offline vBGarage Page   Reply With Quote
Old 10-02-2005, 01:44 AM   #21
Junior Member
 
Join Date: Sep 2005
Location: roc city ny
Posts: 65
Car: 86 iroc z
Engine: 90 l98 vette
Transmission: 700r4w/all vette parts

Classifieds Rating: (0)
Send a message via AIM to roc city f body
have had 3 tickets for no front plate ih8pigz
__________________

James
1986 Camaro IROC-Z---1990 Corvette 350 shortblock, I-98 Corvette aluminum heads (ported & polished), Built 700-R4 transmission w/all Corvette parts, Shift kit in transmission,
2000 Stall Converter, 3:23 Posi Rear End,
TPI Set-up has factory 22lb 350 injectors, Adjustable fuel pressure regulator, Air Conditioning removed, non AC cover replaced, Frame is tied w/Hotchkiss frame ties, B&M Megashifter, Grant GT steering wheel, Has aftermarket chip installed, Car is originally from Arizona www.rochesterfbodyclub.net
roc city f body is offline vBGarage Page   Reply With Quote
Old 10-20-2005, 03:18 PM   #22
Member
 
90tararebird's Avatar
 
Join Date: Mar 2004
Location: wilb. ma.
Posts: 187
Car: 1990 trans am
Engine: 350 tpi
Transmission: 700r4

Classifieds Rating: (4)
Part of the problem is a double standard. I had a one plate green and i had to take the car off the road for a year and when i went to reregister it they had adopeted the the two plates. That was ten years ago and if i still had the green plate i would stll only need the rear plate. so you see half the cars have one plate and half have two does that seem fair. it would not be as bad if every one had to go along the same rules..
90tararebird is offline vBGarage Page   Reply With Quote
Old 10-20-2005, 05:39 PM   #23
Senior Member
 
Join Date: Aug 2002
Posts: 757

Classifieds Rating: (0)

Last edited by Camaro_nut; 10-20-2005 at 05:44 PM.
Camaro_nut is offline vBGarage Page   Reply With Quote
Old 11-17-2005, 12:09 PM   #24
Senior Member
 
firebirdjosh's Avatar
 
Join Date: Oct 2004
Location: Worcester, MA
Posts: 3,361
Car: 86 T/A
Engine: HSR 355
Transmission: 700R4
Axle/Gears: 2.77 posi

Classifieds Rating: (1)
Actually allowing the old plates to still be used is quite generous, otherwise everyone with a green plate would be required to buy new plates if they didn't make the exemption for the old plates.

This law will never be repealed. What's the downside besides that they are ugly? The state doesn't care. And its the easiest target for a radar gun from what I hear. Also works great when some idiot in a black car forgets his headlights at night and you can't see anything but the plate coming at you. For those reasons I refuse to sign as much as I despise my front plate.
firebirdjosh is offline vBGarage Page   Reply With Quote
Old 11-17-2005, 12:38 PM   #25
Senior Member
 
dennisbernal91z's Avatar
 
Join Date: Feb 2005
Location: Dedham, postal code: Dedham, MA
Posts: 3,417
Car: F1, 383 powered Camaro Z28,building
Engine: 385, All forged, Trickflow Al heads
Transmission: T-56, SPEC STAGE 3, hurst shifter.
Axle/Gears: Moser/ 4.11

Classifieds Rating: (2)
Send a message via AIM to dennisbernal91z
They are def. a pain in the ***. I have been pulled over once for no plate. I just keep it under the passenger seat and say " I have it right here officer, I am on my way to go buy mounting screws" worked like a charm. They is no way I am tossing 25 grand into my car and doing ANYTHING I think looks bad. I will never run a front plate.
dennisbernal91z is offline vBGarage Page   Reply With Quote
Old 03-20-2006, 12:13 PM   #26
Moderator
 
Join Date: Jul 1999
Location: Readsboro, VT
Posts: 12,565
Car: 1985 IROC-Z
Engine: 355 Tuned Port
Transmission: T5
Axle/Gears: 3.42

Classifieds Rating: (1)
Send a message via AIM to Jim85IROC
how about a petition to get rid of the ridiculous insurance regulations first?
Jim85IROC is online now vBGarage Page   Reply With Quote
Old 05-31-2006, 06:50 PM   #27
Junior Member
 
smccrillis's Avatar
 
Join Date: Mar 2005
Location: Brockton MA
Posts: 31
Car: 87 trans am
Engine: 350 tpi

Classifieds Rating: (0)
Send a message via AIM to smccrillis
526
smccrillis is offline vBGarage Page   Reply With Quote
Old 05-31-2006, 07:32 PM   #28
TGO Supporter/Moderator
 
anesthes's Avatar
 
Join Date: Jul 1999
Location: SALEM, NH
Posts: 6,170
Car: '79 Z28
Engine: 400 bored .060 over, forged
Transmission: T5
Axle/Gears: 3.73, 8.5" 10 bolt

Classifieds Rating: (5)
Quote:
Originally Posted by dennisbernal91z
They are def. a pain in the ***. I have been pulled over once for no plate. I just keep it under the passenger seat and say " I have it right here officer, I am on my way to go buy mounting screws" worked like a charm. They is no way I am tossing 25 grand into my car and doing ANYTHING I think looks bad. I will never run a front plate.
You put 25k into a thirdgen? They wernt 25k new....

-- Joe
__________________
1979 Z28 - 400 Block, .060 reverse domes, eagle SIR rods, forged crank, XR288HR cam, AFR 195 heads, T5 trans, 8.5" 10 bolt 3.73 gears.
anesthes is offline vBGarage Page   Reply With Quote
Old 05-31-2006, 10:44 PM   #29
Senior Member
 
dennisbernal91z's Avatar
 
Join Date: Feb 2005
Location: Dedham, postal code: Dedham, MA
Posts: 3,417
Car: F1, 383 powered Camaro Z28,building
Engine: 385, All forged, Trickflow Al heads
Transmission: T-56, SPEC STAGE 3, hurst shifter.
Axle/Gears: Moser/ 4.11

Classifieds Rating: (2)
Send a message via AIM to dennisbernal91z
For the last post above this one......

Not sure what the point of that post was... But just to aleviate any confustion that there might be in the world, any muscle car that gets made/moded or anything is gonna cost more than it was new

And one other thing, if u can make a 500 Hp, T-56, Moser 12 bolt, roll gaged, lambo doored, fully custom Camaro for less than 25K please show me the steps.
dennisbernal91z is offline vBGarage Page   Reply With Quote
Old 05-31-2006, 11:07 PM   #30
TGO Supporter/Moderator
 
anesthes's Avatar
 
Join Date: Jul 1999
Location: SALEM, NH
Posts: 6,170
Car: '79 Z28
Engine: 400 bored .060 over, forged
Transmission: T5
Axle/Gears: 3.73, 8.5" 10 bolt

Classifieds Rating: (5)
Quote:
Originally Posted by dennisbernal91z
And one other thing, if u can make a 500 Hp, T-56, Moser 12 bolt, roll gaged, lambo doored, fully custom Camaro for less than 25K please show me the steps.
No lambo doors, no t56, no moser 12 bolt. 500hp ran me 119-120mph every pass, with a t5 and a 10 bolt. Nothing broke, and it didnt cost me 25k.

Neither did my vette.

Are you the guy thats been trying to sell the fully custom camaro with side pipes in the want ad all spring ?

-- Joe
anesthes is offline vBGarage Page   Reply With Quote
Old 06-01-2006, 04:45 PM   #31
Senior Member
 
dennisbernal91z's Avatar
 
Join Date: Feb 2005
Location: Dedham, postal code: Dedham, MA
Posts: 3,417
Car: F1, 383 powered Camaro Z28,building
Engine: 385, All forged, Trickflow Al heads
Transmission: T-56, SPEC STAGE 3, hurst shifter.
Axle/Gears: Moser/ 4.11

Classifieds Rating: (2)
Send a message via AIM to dennisbernal91z
No that is not me......

That is great that you have that kinda power and stuff didn't break or hasn't broke yet.

I am not making a race car at all. This is a 100% street car. It might see the track once just to see what it can do.... THants why it has all the nice stuff in it, it needs to last a long time, get OK milage (T-56) and never ever break when I am out on a cruise....

Anyways, I am not sure what this thread is really trying to discuss, I am building a custom "street" Camaro and you made a camaro with 500 HP. Apples and oranges. Good luck with your Camaro, if you are ever interested in acctually posting advice or a question, then please go ahead, but if u wanna bash me for building a car right, then do it someplace else, or send me an e-mail and I can explain my buildup in more detail.

later,
-Dennis
dennisbernal91z is offline vBGarage Page   Reply With Quote
Old 06-01-2006, 08:49 PM   #32
TGO Supporter/Moderator
 
anesthes's Avatar
 
Join Date: Jul 1999
Location: SALEM, NH
Posts: 6,170
Car: '79 Z28
Engine: 400 bored .060 over, forged
Transmission: T5
Axle/Gears: 3.73, 8.5" 10 bolt

Classifieds Rating: (5)
Quote:
Originally Posted by dennisbernal91z
No that is not me......

That is great that you have that kinda power and stuff didn't break or hasn't broke yet.

I am not making a race car at all. This is a 100% street car. It might see the track once just to see what it can do.... THants why it has all the nice stuff in it, it needs to last a long time, get OK milage (T-56) and never ever break when I am out on a cruise....

Anyways, I am not sure what this thread is really trying to discuss, I am building a custom "street" Camaro and you made a camaro with 500 HP. Apples and oranges. Good luck with your Camaro, if you are ever interested in acctually posting advice or a question, then please go ahead, but if u wanna bash me for building a car right, then do it someplace else, or send me an e-mail and I can explain my buildup in more detail.

later,
-Dennis
Not questioning your buildup, just wondering why soo much into a thirdgen.

I dont have a camaro. had a firebird.

-- Joe
anesthes is offline vBGarage Page   Reply With Quote
Old 06-03-2006, 02:43 AM   #33
Senior Member
 
dennisbernal91z's Avatar
 
Join Date: Feb 2005
Location: Dedham, postal code: Dedham, MA
Posts: 3,417
Car: F1, 383 powered Camaro Z28,building
Engine: 385, All forged, Trickflow Al heads
Transmission: T-56, SPEC STAGE 3, hurst shifter.
Axle/Gears: Moser/ 4.11

Classifieds Rating: (2)
Send a message via AIM to dennisbernal91z
Thats a good question. Not sure..... I am 22 and this is the first and only car I have ever owned. Very high sentimental value. Has a lot of memories. I also plan to NEVER ever sell this car, ever. No matter what. So I see it as a fun toy, sorta investment. Plus they look sharp, are pretty rare, in a anyform and are easy to work with (in general).

Oh I also am in a very lucky position that allows me to spend this kinda $ on a car, I am by no means rich or anything like that. I am just lucky, mainly cuz I do not have to pay for school.

Anyways, I am rambling, Good luck with your build, thanks for not questioning mine, Hope you check my site in a few months when she is done. Later

-Dennis
dennisbernal91z is offline vBGarage Page   Reply With Quote
Old 10-04-2006, 02:12 AM   #34
Senior Member
 
85Firebird350's Avatar
 
Join Date: Sep 2006
Location: Worcester
Posts: 629
Car: 1984 Firebird T/A
Engine: 406sbc
Transmission: TH400
Axle/Gears: Moser 9"

Classifieds Rating: (3)
Send a message via AIM to 85Firebird350
I always use that trick to hide the plate under the seat but I haven't had to use it yet. My da who owns a 2000 Ws6 has been pulled over like 5 times but never for a front plate. They just dont care I guess cuz american muscle is kind of hard to find here in worcester.
85Firebird350 is offline vBGarage Page   Reply With Quote
Old 10-04-2006, 06:41 AM   #35
TGO Supporter/Moderator
 
anesthes's Avatar
 
Join Date: Jul 1999
Location: SALEM, NH
Posts: 6,170
Car: '79 Z28
Engine: 400 bored .060 over, forged
Transmission: T5
Axle/Gears: 3.73, 8.5" 10 bolt

Classifieds Rating: (5)
Quote:
Originally Posted by 85Firebird350 View Post
They just dont care I guess cuz american muscle is kind of hard to find here in worcester.
Huh? Summer nationals? The dyno shop? Chickens customs?

No lack of 'muscle' in worcester.

More like, they don't care because they have hard enough time dealing with all the cracked out homeboys.

-- Joe
__________________
1979 Z28 - 400 Block, .060 reverse domes, eagle SIR rods, forged crank, XR288HR cam, AFR 195 heads, T5 trans, 8.5" 10 bolt 3.73 gears.
anesthes is offline vBGarage Page   Reply With Quote
Old 10-06-2010, 09:39 PM   #36
Supreme Member
 
KITT1983's Avatar
 
Join Date: Mar 2008
Location: Boston, MA
Posts: 1,881
Car: 1983 Pontiac Trans Am Daytona 500
Engine: Crossfire 305ci V8
Transmission: 700R4 4 speed Automatic
Axle/Gears: 3.23 limited slip/posi

Classifieds Rating: (2)
Send a message via Yahoo to KITT1983
Re: Attn. Massachusetts residents front plate petition.

bump
signed
__________________

KITT The White Phantom
http://www.thirdgen.org/techboard/vb...=view&id=78092
http://www.cardomain.com/ride/3112754
Knight Rider will never die !!!!
KITT1983 is offline vBGarage Page   Reply With Quote
Old 10-08-2010, 12:33 PM   #37
Member
 
z28maro91's Avatar
 
Join Date: Jun 2009
Location: Marshfield, MA
Posts: 100
Car: '83 z28/'85 iroc
Engine: L69/LB9
Transmission: 700r4/700r4-b&m shift kit
Axle/Gears: 3.73

Classifieds Rating: (0)
Re: Attn. Massachusetts residents front plate petition.

#1714
z28maro91 is offline vBGarage Page   Reply With Quote
Old 10-12-2010, 10:52 AM   #38
Moderator
 
Join Date: Jul 1999
Location: Readsboro, VT
Posts: 12,565
Car: 1985 IROC-Z
Engine: 355 Tuned Port
Transmission: T5
Axle/Gears: 3.42

Classifieds Rating: (1)
Send a message via AIM to Jim85IROC
Re: Attn. Massachusetts residents front plate petition.

By the time that petition gets enough votes for anybody in government to care, cars will probably be illegal.
Jim85IROC is online now vBGarage Page   Reply With Quote
Old 10-12-2010, 01:02 PM   #39
TGO Supporter/Moderator
 
anesthes's Avatar
 
Join Date: Jul 1999
Location: SALEM, NH
Posts: 6,170
Car: '79 Z28
Engine: 400 bored .060 over, forged
Transmission: T5
Axle/Gears: 3.73, 8.5" 10 bolt

Classifieds Rating: (5)
Re: Attn. Massachusetts residents front plate petition.

Quote:
Originally Posted by Jim85IROC View Post
By the time that petition gets enough votes for anybody in government to care, cars will probably be illegal.
Haha. That is pretty funny.

This would never fly anyway. There is no anyone could ever prove in a court of law that the license plate has any ill effects on anything that would nullify it's necessity for public safety.

-- Joe
anesthes is offline vBGarage Page   Reply With Quote
Old 10-12-2010, 01:02 PM
ThirdGen
1992 Camaro




Paid Advertisement


Reply

Go Back   Third Generation F-Body Message Boards > Regional Boards > North East Region
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 

1982 Camaro '82 || 1983 Camaro '83 || 1984 Camaro '84 || 1985 Camaro '85 || 1986 Camaro '86 || 1987 Camaro '87 || 1988 Camaro '88 || 1989 Camaro '89 || 1990 Camaro '90 || 1991 Camaro '91 || 1992 Camaro '92


All times are GMT -5. The time now is 11:24 PM.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.5.2
All content copyright © 1997 - 2012 ThirdGen.org. All rights reserved. No part of this website may be reproduced without the expressed, documented, and written consent of ThirdGen.org's Administrators.

Emails & Contact Details