Doing a Few Upgrades
#1
Senior Member
Thread Starter
Join Date: Dec 2002
Location: Rocklin, Ca
Posts: 789
Likes: 0
Received 0 Likes
on
0 Posts
Doing a Few Upgrades
Whats up everyone I just thought I'd keep you up to date on the the ol' 85 in case anyone was wondering. Well so far my list of upgrades are:
- Traviz's edelbrock headers and y-pipe (200$)
- KYB GR-2 front struts (150$)
- Energy Suspension polyurathane bushing kit (160)
- misc. maintenance (30$)
I'm in the process of taking everything apart right now as I wait for the parts to ship. I ordered my struts and the bushing kit from Hawk's thirdgen so hopefully they will get a good review from me haha. I will post pics of the progress. I got the exhaust off and the manifolds off so far, interestingly enough my exhaust manifolds did not have gaskets on them (that may explain my frequent exhaust leaks!).
So i'll keep you guys updated on the progress, and Eric, I hope to make it to your b-day gtg!
- Robby
- Traviz's edelbrock headers and y-pipe (200$)
- KYB GR-2 front struts (150$)
- Energy Suspension polyurathane bushing kit (160)
- misc. maintenance (30$)
I'm in the process of taking everything apart right now as I wait for the parts to ship. I ordered my struts and the bushing kit from Hawk's thirdgen so hopefully they will get a good review from me haha. I will post pics of the progress. I got the exhaust off and the manifolds off so far, interestingly enough my exhaust manifolds did not have gaskets on them (that may explain my frequent exhaust leaks!).
So i'll keep you guys updated on the progress, and Eric, I hope to make it to your b-day gtg!
- Robby
#4
Banned
Join Date: Jun 2003
Location: Orangevale, CA
Posts: 1,377
Likes: 0
Received 0 Likes
on
0 Posts
Car: 07 Silverado
Engine: 5.3L V8, flexfuel E85
Transmission: 4spd. Auto
Axle/Gears: 3.73 locking diff.
Nice job Robbie. Sounds like the car is coming together. We still need to race, lol. Anyway, hope to see you out some time.
#6
Banned
Join Date: Jun 2003
Location: Orangevale, CA
Posts: 1,377
Likes: 0
Received 0 Likes
on
0 Posts
Car: 07 Silverado
Engine: 5.3L V8, flexfuel E85
Transmission: 4spd. Auto
Axle/Gears: 3.73 locking diff.
Del, lol, I am down for that race, bring it on and you will get cross-fired.
Trending Topics
#8
Senior Member
Thread Starter
Join Date: Dec 2002
Location: Rocklin, Ca
Posts: 789
Likes: 0
Received 0 Likes
on
0 Posts
Ya I hope we can get one small gtg at the track if possible before season's end, I want to run my car once more with the mods. I am hoping to have the car back up and running by the end of the week if Traviz does what he's supposed to lol. But ya, I'm down for a challenge against the supra and the 83. I should have some pics for ya sometime mid-week on the progress. Right now the exhuast is off and I have the steering column in pieces trying to tighten the tilt bolts, it's a mess. I hope I can get it back together haha.
BTW Will, how do you like your new gear box thing? Better steering response? And how much HP and TQ do you think your putting out?
Del, on your nice web-page your Supra specs show you have 230 hp, that should be good for 14's shouldn't it?
- Rob
BTW Will, how do you like your new gear box thing? Better steering response? And how much HP and TQ do you think your putting out?
Del, on your nice web-page your Supra specs show you have 230 hp, that should be good for 14's shouldn't it?
- Rob
#9
Moderator
iTrader: (2)
Join Date: May 2001
Location: Sac, CA
Posts: 5,246
Likes: 0
Received 11 Likes
on
8 Posts
Car: '89 GTA
Axle/Gears: 3.27/9-bolt
your Supra specs show you have 230 hp, that should be good for 14's shouldn't it?
they are mid-low 15's at best stock.
it's powerband is up top which makes it fun on the freeway, but slow from a dig due to the lag in the turbo spooling.
it also weighs as much as my GTA at about 3500lbs.
but for a bone stock '89 car, it's still a nice ride.
#10
Supreme Member
iTrader: (2)
Join Date: Sep 2003
Location: Woodland, CA
Posts: 10,494
Likes: 0
Received 3 Likes
on
3 Posts
Car: '02 Z06
Engine: L33 5.7
Transmission: T56
Axle/Gears: Stock IRS
hey robbie i got the o2 sensor hole done and tomorrow (monday) i am gonna take the y pipe to the shop and have the 3" conversion done. and then im gonna try the swap same day.
#11
Supreme Member
iTrader: (2)
Join Date: Jan 2005
Location: 707
Posts: 3,058
Likes: 0
Received 0 Likes
on
0 Posts
Car: '92 Z03
Engine: LSX
Transmission: M12
Those shiny Hedmans are going to look as sweet as mine lil bro!
Too bad you didn't opt for the "rust" colored ones like mine hahaha
At least they still function the same.
Too bad you didn't opt for the "rust" colored ones like mine hahaha
At least they still function the same.
#12
Supreme Member
iTrader: (2)
Join Date: Nov 2003
Location: Antelope, CA
Posts: 3,400
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 IrocZ/17 LS 1LE
Engine: 383/LGX
Transmission: 400/TR-3160
Axle/Gears: 3.08/3.27
this is the last month for wednesday fun drags after that its just saturday test~n~tunes until march
#14
Banned
Join Date: Jun 2003
Location: Orangevale, CA
Posts: 1,377
Likes: 0
Received 0 Likes
on
0 Posts
Car: 07 Silverado
Engine: 5.3L V8, flexfuel E85
Transmission: 4spd. Auto
Axle/Gears: 3.73 locking diff.
Originally posted by Cali Z
BTW Will, how do you like your new gear box thing? Better steering response? And how much HP and TQ do you think your putting out?
BTW Will, how do you like your new gear box thing? Better steering response? And how much HP and TQ do you think your putting out?
#17
Originally posted by TraviZ
rex?
rex?
JesasaurusRex is my SN on every other forum, if i could change mine i would but this site wont let you nor do i know who owns this forum. Goin down on me basically if ur confused trav
#23
Supreme Member
iTrader: (2)
Join Date: Nov 2003
Location: Antelope, CA
Posts: 3,400
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 IrocZ/17 LS 1LE
Engine: 383/LGX
Transmission: 400/TR-3160
Axle/Gears: 3.08/3.27
Originally posted by DevilsAddvocate
sorry
JesasaurusRex is my SN on every other forum, if i could change mine i would but this site wont let you nor do i know who owns this forum. Goin down on me basically if ur confused trav
sorry
JesasaurusRex is my SN on every other forum, if i could change mine i would but this site wont let you nor do i know who owns this forum. Goin down on me basically if ur confused trav
oh!! travis is wills b!tch so you better watch out
#27
Originally posted by TraviZ
i hate you.
hey do you have a chrome alt?
i hate you.
hey do you have a chrome alt?
ORDERED SOME BRAKE PARTS FELLAS w00t, hopefully can do a decent brake stand after i get it all set up
#29
Supreme Member
iTrader: (2)
Join Date: Nov 2003
Location: Antelope, CA
Posts: 3,400
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 IrocZ/17 LS 1LE
Engine: 383/LGX
Transmission: 400/TR-3160
Axle/Gears: 3.08/3.27
Originally posted by DevilsAddvocate
who's the admin
who's the admin
#32
Senior Member
Thread Starter
Join Date: Dec 2002
Location: Rocklin, Ca
Posts: 789
Likes: 0
Received 0 Likes
on
0 Posts
11/12/05
Got headers on. Will post pics when everything gets hooked up. Had to raise the engine to get the drivers side header on. The Passenger side slid right on without problems but that last bolt is a real pita.
Travis, thank you very much for the headers, you're a good friend.
Got headers on. Will post pics when everything gets hooked up. Had to raise the engine to get the drivers side header on. The Passenger side slid right on without problems but that last bolt is a real pita.
Travis, thank you very much for the headers, you're a good friend.
#35
Banned
Join Date: Jun 2003
Location: Orangevale, CA
Posts: 1,377
Likes: 0
Received 0 Likes
on
0 Posts
Car: 07 Silverado
Engine: 5.3L V8, flexfuel E85
Transmission: 4spd. Auto
Axle/Gears: 3.73 locking diff.
Looks very nice Robby, makes me jealous, I want headers now. Also makes me want to switch to TPI, lol, maybe someday I will, anyway, nice job.
I am not Travis bish by the way, f*** Travis, I will body slam him to the ground next time, lol.
I am not Travis bish by the way, f*** Travis, I will body slam him to the ground next time, lol.
#36
Senior Member
Thread Starter
Join Date: Dec 2002
Location: Rocklin, Ca
Posts: 789
Likes: 0
Received 0 Likes
on
0 Posts
thnx for the nice words.
Will, I am failing to see you being able to take Travis by hand to hand combat. I think you would get owned lol. J/K. Weren't you going to switch to TPI? What happened with that? Did you find a newfound love for the subtle flow of a CFI design?
As for the car. Since the y-pipe has a gap between it and the cat, and they are at slight angles to eachother, what would be a good solution? Is there more to it than just a pipe to connect the two since they are at an angle?
- Robby
Will, I am failing to see you being able to take Travis by hand to hand combat. I think you would get owned lol. J/K. Weren't you going to switch to TPI? What happened with that? Did you find a newfound love for the subtle flow of a CFI design?
As for the car. Since the y-pipe has a gap between it and the cat, and they are at slight angles to eachother, what would be a good solution? Is there more to it than just a pipe to connect the two since they are at an angle?
- Robby
#39
Senior Member
Join Date: May 2003
Location: bay area, CA
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 IROCZ
Engine: L98 4150 carb
Transmission: Transgo 700-r4
Axle/Gears: 10 bolt/3.23
Originally posted by JesasaurusRex
hows she sound with that wrench in ur exhaust system Trav
hows she sound with that wrench in ur exhaust system Trav
#42
Banned
Join Date: Jun 2003
Location: Orangevale, CA
Posts: 1,377
Likes: 0
Received 0 Likes
on
0 Posts
Car: 07 Silverado
Engine: 5.3L V8, flexfuel E85
Transmission: 4spd. Auto
Axle/Gears: 3.73 locking diff.
Originally posted by Cali Z
thnx for the nice words.
Will, I am failing to see you being able to take Travis by hand to hand combat. I think you would get owned lol. J/K. Weren't you going to switch to TPI? What happened with that? Did you find a newfound love for the subtle flow of a CFI design?
- Robby
thnx for the nice words.
Will, I am failing to see you being able to take Travis by hand to hand combat. I think you would get owned lol. J/K. Weren't you going to switch to TPI? What happened with that? Did you find a newfound love for the subtle flow of a CFI design?
- Robby
#44
Banned
Join Date: Jun 2003
Location: Orangevale, CA
Posts: 1,377
Likes: 0
Received 0 Likes
on
0 Posts
Car: 07 Silverado
Engine: 5.3L V8, flexfuel E85
Transmission: 4spd. Auto
Axle/Gears: 3.73 locking diff.
The X-Ram idea is still in the mix, not really sure though, I have read some bad things about it on the CFI boards from some of the CFI Vette guys. I still need to do some more research. Plus, I would almost rather wait and save my money for the TPI swap, even though that would be a while from now. I am putting all of my money now into getting the looks of the car restored, redoing the suspension and a few other things.
#46
Senior Member
Thread Starter
Join Date: Dec 2002
Location: Rocklin, Ca
Posts: 789
Likes: 0
Received 0 Likes
on
0 Posts
11/22/05
Suspension, exhaust, and steering column are finished now. So my car was down for over a month on these relatively minor things, it took half that time for my parts just to get here. My guess is that my car may be as fast as Will's now, assuming my car doesn't have the fuel problem it does. From what I read, my car should have ran .4-.6 tenths and several mph faster in the 1/4 if my car wasn't losing fuel under load at high rpm. but I'll save that for a different day. So add these mods, and potentially I could have been in the 14's, what a dream come true, kinda.
Well I guess now I have about 2k into my thirdgen, I've learned alot in that time, so I guess it pays off.
Thanks for reading,
- Robby
Suspension, exhaust, and steering column are finished now. So my car was down for over a month on these relatively minor things, it took half that time for my parts just to get here. My guess is that my car may be as fast as Will's now, assuming my car doesn't have the fuel problem it does. From what I read, my car should have ran .4-.6 tenths and several mph faster in the 1/4 if my car wasn't losing fuel under load at high rpm. but I'll save that for a different day. So add these mods, and potentially I could have been in the 14's, what a dream come true, kinda.
Well I guess now I have about 2k into my thirdgen, I've learned alot in that time, so I guess it pays off.
Thanks for reading,
- Robby
#47
Banned
Join Date: Jun 2003
Location: Orangevale, CA
Posts: 1,377
Likes: 0
Received 0 Likes
on
0 Posts
Car: 07 Silverado
Engine: 5.3L V8, flexfuel E85
Transmission: 4spd. Auto
Axle/Gears: 3.73 locking diff.
Way to go Robby, glad to hear it's all working out and the car is getting faster. I am sure it's faster than the CFI, trust me, lol. Hope to see your car and progress some time soon. Post some more pics when you get a chance.
#49
Senior Member
Thread Starter
Join Date: Dec 2002
Location: Rocklin, Ca
Posts: 789
Likes: 0
Received 0 Likes
on
0 Posts
Yes it's driving. I havn't really got on it too much but it sure feels noticeably faster. The sound has changed alot! It has a much deeper tone and is noticeably louder when cruising around. The suspension feels more responsive w/ the new struts and bushings, no more squeaks. I still need to get it aligned though. lol, my old struts that we took out wouldn't even push back out after you compressed them what a joke! As far as performance I had a chance to wot throttle through 1st and 2nd gear and it seems to pull harder through the 4-5k rpm range, which is good I think. Now, I would like to think my car can run low 15 or better with traction, but I guess I'll have to get out there to find out.
Will, wanna race??
Will, wanna race??
#50
Banned
Join Date: Jun 2003
Location: Orangevale, CA
Posts: 1,377
Likes: 0
Received 0 Likes
on
0 Posts
Car: 07 Silverado
Engine: 5.3L V8, flexfuel E85
Transmission: 4spd. Auto
Axle/Gears: 3.73 locking diff.
Robby, I am down for a race. We need to take them to the track as well and see what the times and mph are. I still have things to do though before I will run mine at the track, gas tank, fuel pump, etc. Also have some stuff for the tranny to firm up the shifts, then I am down for the track.