Northern Great Plains and Rocky MountainsRegional Board for Colorado, Kansas, Nebraska, Utah, Wyoming, Montana and the Dakotas.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I have noticed in a few other places on the board that they have a swapmeet section for there region. I think we need one of these. Better to look local then ebay ect...
List all parts you have in your garage or shed or wherever. Parting out a car ect... Must have prices.
Almost everybody needs SOMETHING for there car. Weither its a arm rest or your may be wanting to trade a pass mirror for a driver. Ect.....
POST AWAY!!!!
__________________ 1985 TA Curently under construction. Soon to have more C.I. and less tread. LOL Vampire? Tech
I need a passenger side door in a couple weeks for a 85-90 T/A. I don't think I'll go outside nebraska to pick it up.
Parts I have: Passenger side T-top, American Racing Sniper???? Rims - 16"x7.5" pulled from a 95 camaro - $200.
From 86 LG4 T/A: a/c compressor, a/c lines, cruise control servo, never used headlight(not headlight motor),ebrake handle, some emissions stuff, and smog pump. From 92 Firebird: Used foglight.
Got a perfectly good alternator from my IROC. It's an 87, so it would have the 12 o'clock and 6 o'clock mounting points. Took it off when I went to the serpentine setup......one 6-pack of Sunshine Wheat is the price.
__________________ 1987 IROC
305 TPI, built 700R-4,Black leather 4th gen seats, MSD 6AL, MSD Blaster Coil, LS1 Rear Brakes, 3.42 posi rear, ......that's pretty much it.
Oh yea, and my all-original Turbo Trans Am #437 too!
Wiring harness, computer, and carb for a CC Qjet carb setup. Off my 84 L69 auto. $50 obo.
Coolguywalt I will give you a TWELVE pack of Sunshine Wheat in trade for your TTA!!!!!!!
__________________ 84 Trans Am originally an L69, now a mild 350 w/ (crappy)882 heads, XE256H cam, and Weiand Stealth intake. Backed by a 700r4 and a peg leg 3.73 rear.
Hmmmmm, a 12 pack, huh? Wait, what am I saying! Also found an instrument cluster from a 87 Camaro V6 (so it has the lights and big ol' fuel gauge) for another 6 pack!
__________________ 1987 IROC
305 TPI, built 700R-4,Black leather 4th gen seats, MSD 6AL, MSD Blaster Coil, LS1 Rear Brakes, 3.42 posi rear, ......that's pretty much it.
Oh yea, and my all-original Turbo Trans Am #437 too!
.040 over pistons, rings, crank balanced to these pistons, cam (no idea on specs), TPI runners and manifold off of 92, stock 22# injectors, and even a tire to put an engine on. I'm sure there is more, but I can't think of much more right now. At this point we will be happy to get rid of the stuff so a bunch of it will either go to you guys or the junk yard (so take it now for free ). Oh and somewhere down the line will be a stock red RS hood that is in damn good condition.
__________________ Cars back in the States: 1992 Camaro RS = 15.298 @ 90.01 mph (~5800 ft.) corrected to ~ 13.7 @ 101 mph 2004 GTO = 13.2 @ 108.7 mph (~5800 ft.) corrected to ~11.7 @ 120 mph 1990 VW Jetta - Lots of suspension mods, Bosal cat-back, awaiting new 1.8L, Neuspeed CAI, Neuspeed short-shifter
Where to begin...
Oh and somewhere down the line will be a stock red RS hood that is in damn good condition.
Nick,
Let me know on the hood man I need it badly. My son and I are working on his new car and it needs a hood. please let me know ASAP. I dont care what color it is the car is already blue black and white
Well here we go........
1 set of glass T-Tops locking no key $20.00 (or best)
A set of side ground effects from a 92 Z28 great condition ($100.00 or best)
92 Back bumper from a 92 Z28 great condition 100.00 (or best)
3 back glasses $20.00 (you pick up)
Complete gray interior minus door panels 30.00 (or best)
TPI plenum and runners (name your price)
One set of IROC grid style tail lights $60.00 (or best)
I have more odds and ends but can't remember all of it. and all prices are negotiable no shipping you pick up. I do need a Camaro hood so keep that in mind.
Last edited by cherryred89; 05-19-2006 at 09:58 AM.
.040 over pistons, rings, crank balanced to these pistons, cam (no idea on specs), TPI runners and manifold off of 92, stock 22# injectors, and even a tire to put an engine on. I'm sure there is more, but I can't think of much more right now. At this point we will be happy to get rid of the stuff so a bunch of it will either go to you guys or the junk yard (so take it now for free ). Oh and somewhere down the line will be a stock red RS hood that is in damn good condition.
Are the pistons, rings, and crank used? If so how many miles on them?
Wow - I figured that when Russ got on this post, it would go on for 3 or 4 pages!
On a more serious note, somewhere around here, I've got a vacuum secondary Holley 750 carb that was built for the cammed 355 in my old pickup...
And here shortly, I'll have the following that I'll be looking to clear out:
* A TPI base, runners, & ported plenum (maybe);
* A set of eight 24 lb/hr ADS "Super Injectors" (less than 20k on 'em, supposed to have a lifetime guarantee against clogging) - another "maybe" as it's starting to look as though I'll need to step up to 30 or 32# units;
* A pair of L98 heads, milled .005", & with a 3-angle valve job;
* A stock L98 hydraulic roller cam, less than 80k miles on it;
* A stock L98 crankshaft (1-pc rear main seal) again, less than 80k miles on it;
* A set of stock (stamped) rear lower control arms (nice to have an extra set to have boxed, so you don't have any down-time);
Finally, sometime around this fall, I'll probably be looking to sell my 700R4 auto tranny, & maybe my stock radiator as well.
Ok, I have a set of ultma seats out of my gta(front and back). They need recovered but other than that they are in good shape, the lumbars supports work fine, the back seat is the split rear. They are cloth. FREE to good home. You must pick them up.
Conrad
__________________ 1987 GTA 5.7, W/88 formy 350 and trans-hedman hedders and y-pipe,cat delete,dynomax catback,airfoil,k@n filter,afpr,A/C delete,smog delete,2400 stall,corvette servo and .5 boost vavle,TB bi-pass,tpi free mods,wonderbar,stb,kyb's all around,rest of the normal stuff.
15.967@83.63(~5800ft~)
1967 firebird 400(lots of goodies)
1992 vert. SOLD
Ok I'v got all kinds of stuff I've got pre 91 TA tail lights,
a 91 TA rear bumper
A set of moser axles for a thirdgen
24lb injectors
chip burning software and burner/reader plus the needed adapters,
stock L98 block, heads, cam
I've got a comp retro fit hydraulic roller cam that needs to go.
and I'm sure there's more I'll add on when I find more goods.
Ok, I have a set of ultma seats out of my gta(front and back). They need recovered but other than that they are in good shape, the lumbars supports work fine, the back seat is the split rear. They are cloth. FREE to good home. You must pick them up.
They are tan, but like I said they need recovered. I'll get a pic this weekend, I have to get them out of storage and get some stuff for other MHTGs members anyway.
----------
Quote:
Originally Posted by 91RamAir Formula
Ok I'v got all kinds of stuff I've got pre 91 TA tail lights,
a 91 TA rear bumper
A set of moser axles for a thirdgen
24lb injectors
chip burning software and burner/reader plus the needed adapters,
stock L98 block, heads, cam
I've got a comp retro fit hydraulic roller cam that needs to go.
and I'm sure there's more I'll add on when I find more goods.
Are the axles for a 10 bolt or B/W 9 bolt?
Last edited by twobirds; 05-20-2006 at 11:08 AM.
Reason: Automerged Doublepost
Well Sasa the cam will work in a hydraulic flat tappet motor but you will have to buy retrofit hydraulic roller lifters to go with it, as well as a cam button. I would like to get a $100 for it.
Anybody have a Edelbrock or Holley 600 carb? Gonna use a 750 to get it going, but I'm just borrowing it, so I need a carb, and I think a 750 is overkill for my setup.
__________________ 84 Trans Am originally an L69, now a mild 350 w/ (crappy)882 heads, XE256H cam, and Weiand Stealth intake. Backed by a 700r4 and a peg leg 3.73 rear.
stock steering wheel from my 92RS WITHOUT the airbag
front grill and license plate holder from the same 92RS
Vacuum canister with custom made mount bracket
K&N Stubstack for holley carb
Thrust Roller bearing for timing chain
Stuff that all needs to go somewhere it can be used, it will be cheap + shipping
__________________ Arctic White 92 RS, 383 w/D1SC N/A 11.85 (Procharged times to come soon)
Arctic White 02 SS,LS1 13.62@105
I have alot more stuff but like V8Rumble said it will take 4 pages to list it all.
I need to get alot of this stuff out of here before my wife has a fit. And my shed is filling up with parts I can barely move in there as it is.
Set of rear seats, one piece upper and 2 lower pieces, RED in color, no rips at all, removed from my 92RS
Set of 16 stock roller lifters
Set of 16 stock pushrods
Comp 286H cam and lifters
set of rear seatbelts RED from 92RS
Set of 16 springs removed from my AFR heads when i put on the roller cam springs.
__________________ Arctic White 92 RS, 383 w/D1SC N/A 11.85 (Procharged times to come soon)
Arctic White 02 SS,LS1 13.62@105
I found a vert top that I was going to put on my old 92 bird. It is black with plastic window, it is used but in great shape. Best offer.
Conrad
__________________ 1987 GTA 5.7, W/88 formy 350 and trans-hedman hedders and y-pipe,cat delete,dynomax catback,airfoil,k@n filter,afpr,A/C delete,smog delete,2400 stall,corvette servo and .5 boost vavle,TB bi-pass,tpi free mods,wonderbar,stb,kyb's all around,rest of the normal stuff.
15.967@83.63(~5800ft~)
1967 firebird 400(lots of goodies)
1992 vert. SOLD
I've got the rear hatch/glass minus the middle 3pc. spoiler, and primered pass. side door w/electric windows AND the glass. They're off an 83 z28. I don't have a truck (or anyone with one) so it'd be pickup only
Hey, Slush, keep us updated on what parts you have
__________________ [Communicating through the C.B. radio]
Bandit: Sheriff, uh, Buford T. Justice, please.
Buford T. Justice: Who there?
Bandit: This is Bandit Darville talkin'.
Buford T. Justice: Where are you, you sombitch?
Bandit: Before I tell you where I am, Sheriff, there's just one thing I wanna say. You must be part coon dog, 'cause I've been chased by the best of them, and son, you make 'em look like they're all runnin' in slow motion. I just wanna say that.
Buford T. Justice: Well, thank you, Mr. Bandit. And as the pursuer, may I say you're the goddamnedest pursuee I've ever pursued. Now that the mutual bull**** is over, WHERE ARE YOU, YOU SOMBITCH?
Nick!!!!!!!!!!!!!!!!!!!!!!!!!
I need that fan man well my son needs it we have an aftermarket on his an its no doing the job especially in this heat name your price but dont beat me up
I have two A/C deletle air boxes for sale. No blower motors..just the boxes.
$20.00 each.
Conrad
BOTH ARE SOLD
__________________ 1987 GTA 5.7, W/88 formy 350 and trans-hedman hedders and y-pipe,cat delete,dynomax catback,airfoil,k@n filter,afpr,A/C delete,smog delete,2400 stall,corvette servo and .5 boost vavle,TB bi-pass,tpi free mods,wonderbar,stb,kyb's all around,rest of the normal stuff.
15.967@83.63(~5800ft~)
1967 firebird 400(lots of goodies)
1992 vert. SOLD
__________________ 1987 GTA 5.7, W/88 formy 350 and trans-hedman hedders and y-pipe,cat delete,dynomax catback,airfoil,k@n filter,afpr,A/C delete,smog delete,2400 stall,corvette servo and .5 boost vavle,TB bi-pass,tpi free mods,wonderbar,stb,kyb's all around,rest of the normal stuff.
15.967@83.63(~5800ft~)
1967 firebird 400(lots of goodies)
1992 vert. SOLD
My tranny is slipping and making some noises. I am looking for another one. 700r4 if any of you have one, or are planning on pulling it out etc... Let me know, i have a small budget so (in Russes words) don't beat me up!
I will entertain any offers, or trades/partial trades!
I have near perfect '84 firebird taillights, amber fog lights a few emblems, a whole box full of misc. parts.
I just found a Rochester carb, ran good when I took it off (its from an 81 chevy p.u.) a 5speed shifter console, dirty but nice.
Looking for a aluminum DS. LS1 or 1LE. PM me if you have one.
Conrad
__________________ 1987 GTA 5.7, W/88 formy 350 and trans-hedman hedders and y-pipe,cat delete,dynomax catback,airfoil,k@n filter,afpr,A/C delete,smog delete,2400 stall,corvette servo and .5 boost vavle,TB bi-pass,tpi free mods,wonderbar,stb,kyb's all around,rest of the normal stuff.
15.967@83.63(~5800ft~)
1967 firebird 400(lots of goodies)
1992 vert. SOLD
I have a dual snorkel air box, $100 shipped. I also have an Lear Siegler Conteur seat and accompanying pass seat both of which have been reconditioned and reupholstered, $150 shipped. I can provide the GM part numbers of the material so that the rear seats could be copied (black with tweed inserts). Pics of both are available.
JamesC
__________________ "There are more things in heaven and earth, Horatio, / Than are dreamt of in your philosophy." Hamlet
"Convictions are more dangerous enemies of truth than lies." Nietzsche
). Oh and somewhere down the line will be a stock red RS hood that is in damn good condition. 
I'll pick the other one up from you today if you have time. 
