Complete TPIS Mini Ram Setup F/S
04-08-2006, 07:14 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2004
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Complete TPIS Mini Ram Setup F/S
I just bought a car that has a TPIS miniram setup on it with a 58mm Lingenfelter tb and thirty pound svo injectors. I will also include the MSD distributor with it and the air intake setup. I am selling it because I dont know how to tune electronic fuel injection. I read the How to guide on Prom tuning and decided a carb would just be easier fo me so I am switching it to a carb setup. I really dont know how much I should ask for all of this stuff but I looked up the some of the stuff that I am selling and here is what it would cost new:
TPIS miniram manifold and f-body fuel rail kit-$1302.34 (previous owners receipt)
Lingenfelter 58 mm TB - $599.99
MSD-8366 (part number) Distributor $289.95
Air intake and kn filters - ???
SVO 30# injectors 200.00
Thats 2 over grand in parts and I can send pics if anyone wants but I dont know how to post them on the site. PM me with any offers I think all of this stuff would be worth about $1,000.00
TPIS miniram manifold and f-body fuel rail kit-$1302.34 (previous owners receipt)
Lingenfelter 58 mm TB - $599.99
MSD-8366 (part number) Distributor $289.95
Air intake and kn filters - ???
SVO 30# injectors 200.00
Thats 2 over grand in parts and I can send pics if anyone wants but I dont know how to post them on the site. PM me with any offers I think all of this stuff would be worth about $1,000.00
04-08-2006, 10:49 PM
#3
Junior Member
Join Date: Jun 2005
Location: witt,il
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc
Engine: 350
Transmission: 700r4
Axle/Gears: dana44 3.73
tpis
where are you located can i get pics and would you be willing to sell just the intake with rails do you take paypal
04-09-2006, 08:43 AM
#5
Supreme Member
iTrader: (26)
Join Date: Nov 2002
Location: Moneta, VA
Posts: 2,108
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89 formula 350
Engine: ls1 magnuson tvs2300 supercharger
Transmission: T56
Axle/Gears: 4.11 Dana 44!
damnit! I just bought a miniram last week 
Last edited by Justin89Formy; 04-09-2006 at 04:20 PM.
04-09-2006, 09:48 AM
#6
Junior Member
Thread Starter
Join Date: Jan 2004
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
I will email some pictures to anyone who wants them. I'll go over and take them this afternoon. I dont want to piece it out so its all going to go. If you sent me your e-mail you will get some pictures. I am located in Omaha,NE and the general condition of everything is pretty good I think. I will take some close up pictures so you can seee how it looks. It needs to be cleaned on the outside I think and it is still on the car. I just bought the car on Wednesday and drove it back 460 miles so everything works. The car itself would just need fine tuning and I only know how to do that on a Carb. After I send the pictures out whoever offers me $1,000.00 first gets the whole setup. I can check how much shipping will be after I take all the stuff off the car but it probably wont be too outragous because the manifold and fuel rails weigh 29 pounds and probably a good 5-10 for the TB and then a dist and the intake system with K&N filters which cant be much more than 5-10 pounds.
Trending Topics
04-09-2006, 03:05 PM
#8
Junior Member
Thread Starter
Join Date: Jan 2004
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
I forgot to mention I will also include the MSD Blaster Coil. I am going to hold out a week or two to see if cant get $1000.00 for the whole setup. If I dont I will go to the next highest offer. I took some pics so if you want I can email them out. Also I think the air intake that is on it is some kind of aftermarket ram air but I am not certain its in the pics. As far as payment I will accept paypal that is not a problem or check if you want but paypal is fine. I really dont want to part it out sorry.
04-09-2006, 04:53 PM
#9
Junior Member
Join Date: Jun 2005
Location: witt,il
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc
Engine: 350
Transmission: 700r4
Axle/Gears: dana44 3.73
intake
im still interested ill give the 1000.00 for everything can i get the chip for the ecu also just give me some pics if no damage ill paypal you the money
04-10-2006, 03:47 PM
#13
Junior Member
iTrader: (2)
Join Date: Oct 2005
Location: McAllen, TX
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28
Engine: 357ci. 292xfi, 220/64, Victor Jr.
Transmission: 700R4
Axle/Gears: 4.10
If and when you decide to part this out. I'd be interested in the MINIRAM with rails, distributor, and coil. Let me know if you decide to part it out.
Thanks,
Aaron
Thanks,
Aaron
04-11-2006, 06:22 AM
#15
04-11-2006, 11:39 AM
#17
Member
Join Date: May 2005
Location: Bonner Springs, Ks
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 camaro z
Engine: 383
Transmission: 700r4
Axle/Gears: 4:11
TPIS
Would like picks to damienjmick@gmail.com. I will be up in your neck of the woods; the weekend after Easter. Is there a # I can reach you at?
Thanks,
Damien
Thanks,
Damien
04-11-2006, 10:17 PM
#20
Member
Join Date: Oct 2002
Location: st.paul minnesota
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Car: IROC Z
Engine: 355 MINIram w/boost
Transmission: T56
CONSIDER IT SOLD!!
will pay $1,000 plus shipping.
I WILL BUY THIS!!
please email me gflo29@yahoo.com
pm or email me for my cell number, no BS i will buy this!!!!
thank you very much.
Joe G
will pay $1,000 plus shipping.
I WILL BUY THIS!!
please email me gflo29@yahoo.com
pm or email me for my cell number, no BS i will buy this!!!!
thank you very much.
Joe G
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM
L98GTA87
Engine/Drivetrain/Suspension Wanted
1
08-11-2015 06:55 PM
