92blue

iTrader: (1)

I need the two torx bolts that hold the smog pump onto the bracket on the 88-92 serpentine belt setups. They must be in excellent shape, no stripped threads or stripped head. Let me know how much you want for them shipped if anyone has these lying around. I'm in Miami, Fl 33184.

ktacam

I just pulled the smog off my 85, I noticed you said 88-92 not sure if these will work. Let me know.

92blue

iTrader: (1)

I don't think they are the same. Your 85 had a v belt setup, and I think the bolts were different compared to a serpentine setup.

ktacam

My engine is from an 87 and it has serpentine.

92blue

iTrader: (1)

So you had an 87 engine with serpentine in an 85 Camaro? Or are these two different cars.

I can use the bolts so long as its from an Fbody serpentine setup.

ktacam

The car is an 85 with an 87 engine w/serpentine. I pulled the smog last week. I have not had the car very long and forgot the engine was newer w/serpentine. The pump is still bolted to the bracket and is off the car. Are the two bolts you are looking for located behind the pulley or on the backside of the bracket?

92blue

iTrader: (1)

Great!

The bolts are behing the smog pulley. You need to remove the pulley from the pump before you can remove the bolts. They both have Torx heads.

ktacam

Alright, I will probably not be able to get them until tomorrow or Friday. The bracket is not at this location. Also I recall the front pulley bolts looking extremely rusty, I will pb blast them and hopefully they will come out. I will let you know.

smallblockking

iTrader: (10)

i have a pair from a 89 trans am. email if you need them.
danziroc383@yahoo.com

92blue

iTrader: (1)

Thanks, but I already bought a pair of new ones. They are discontinued, and expensive as hell.