Harbor Freight engine hoist
#1
Supreme Member
Thread Starter
Join Date: Feb 2006
Location: St.Louis, IL
Posts: 1,366
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Camaro
Engine: 377
Transmission: TH350; Circle D 4200 converter
Axle/Gears: Ford 9"
Harbor Freight engine hoist
So the first thing you think about when you hear harbor freight is the word "cheap" .. certainly, there's no doubt there - but I think some things from there are definitely buyers. One of them is the engine hoist and balancer setup. With a coupon, you get one of these hoists for a very good price. Ended up putting it together, and the directions were fairly straight forward for the most part... part quality was decent for the money spent. It probably doesn't have some of the extremely nice additions that some of the high dollar hoists do as far as "bells and whistles", but it does it's job and does it well. had no problems with it, and worked great right out of the box. The welds looked good, the coating was also decent on the metal, and the construction was overall fairly solid. I'd definitely recommend it to other people if you're trying not to spend a messload on one of the hoists.. just make sure you get the 2 ton variant or you're going to have problems getting down into the engine bay. It also folds up real nicely, and that's a plus.
Just figured I'd give you guys a heads up if some of you were on the fence like I was. I'd say this is one of the A+ harbor freight purchases that everyone should have if they work on vehicles in their garage.
Just figured I'd give you guys a heads up if some of you were on the fence like I was. I'd say this is one of the A+ harbor freight purchases that everyone should have if they work on vehicles in their garage.
#2
Junior Member
iTrader: (1)
Join Date: Jan 2010
Location: Indian Mound, TN
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Car: '91 Camaro RS T-Top
Engine: 383 Stroker
Transmission: Bulldog 700r-4
Axle/Gears: 3.73
Re: Harbor Freight engine hoist
Totally agree with you. I bought one of these coming up on two years now, and it's still going strong.
Only complaint is that it has a tough time moving across uneven ground, but really, it's to be expected, and I wish the boom went out farther.
Side note, if you're ever in an Advance Auto Parts, don't buy one of their load levelers, it's really "bendy" if you know what I mean
Only complaint is that it has a tough time moving across uneven ground, but really, it's to be expected, and I wish the boom went out farther.
Side note, if you're ever in an Advance Auto Parts, don't buy one of their load levelers, it's really "bendy" if you know what I mean
#3
Junior Member
Join Date: Aug 2011
Location: Upper NY
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Camaro
Engine: 350
Transmission: 700r4
Axle/Gears: 2.73
Re: Harbor Freight engine hoist
I also bought a thousand pounder from HFT (my place of employment) and i also was surprised by how well it worked. I bought it for next to nothing after my 99.99 coupon and 20% employee discount.
I however didn't like the directions at all. It isn't rocket science to put one together, but i found that for someone with less experiance, they could be a touch hard to follow. Nothing major, just the fact that in the directions they label nuts and bolts, but in the bags there is no labeling what-so-ever.
I however didn't like the directions at all. It isn't rocket science to put one together, but i found that for someone with less experiance, they could be a touch hard to follow. Nothing major, just the fact that in the directions they label nuts and bolts, but in the bags there is no labeling what-so-ever.
#4
Senior Member
iTrader: (17)
Join Date: Mar 2002
Location: Rincon, Ga.
Posts: 854
Likes: 0
Received 8 Likes
on
6 Posts
Car: 91 Camaro RS
Engine: 305 TPI conversion.
Transmission: T56
Axle/Gears: 3.73 posi 4th gen rear
Re: Harbor Freight engine hoist
i love mine. no problems at all and assembly was easy.
#5
Senior Member
Join Date: Sep 2003
Location: Hurlburt Field
Posts: 738
Likes: 0
Received 1 Like
on
1 Post
Car: 84 Z28, '15 Colorado
Engine: L69
Transmission: A4
Axle/Gears: 3.73
Re: Harbor Freight engine hoist
I have one as well and the leveler. Overall it's one of the few products that they have that work really really well (including their engine stand). My only complaint are the bolts. They are, at best, grade 5.
I actually snapped one in half at 20 ft lbs
I actually snapped one in half at 20 ft lbs
#6
Supreme Member
iTrader: (1)
Join Date: Mar 2007
Location: Arlington, Tx
Posts: 3,525
Likes: 0
Received 6 Likes
on
5 Posts
Car: 91 Camaro RS
Engine: empty bay (for now)
Transmission: Built T-56
Axle/Gears: 3.42 stock posi disc
Re: Harbor Freight engine hoist
i got mine a few years ago and have used it quite a few times with no issues. its JUST long enough to reach into the engine bay on a 3rd gen with the boom all the way out.
Trending Topics
#8
Member
Join Date: Jan 2010
Location: Seminole, FL
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 trans am
Engine: 350sb
Transmission: t400
Axle/Gears: 7.5/2.73
Re: Harbor Freight engine hoist
I got one of these with the balancer for $150 brand new from HF, I got the gunmetal 2 ton one, for some reason it wasn't orange like the rest of the ones they had. But it works great and has never let me down, it does have a tough time with rough surfaces though, especially driveway bumps.
#9
Supreme Member
Thread Starter
Join Date: Feb 2006
Location: St.Louis, IL
Posts: 1,366
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Camaro
Engine: 377
Transmission: TH350; Circle D 4200 converter
Axle/Gears: Ford 9"
Re: Harbor Freight engine hoist
I got one of these with the balancer for $150 brand new from HF, I got the gunmetal 2 ton one, for some reason it wasn't orange like the rest of the ones they had. But it works great and has never let me down, it does have a tough time with rough surfaces though, especially driveway bumps.
#10
Senior Member
iTrader: (5)
Join Date: Aug 2010
Location: Wichita Falls, TX
Posts: 916
Likes: 0
Received 8 Likes
on
8 Posts
Car: 91 Firebird,00 c2500,75 Vette
Engine: 3.1 but 350 soon, 350, 350
Transmission: T56 soon
Axle/Gears: stock 3.42 Posi to come
Re: Harbor Freight engine hoist
I used one about 2 years ago and liked it much better than my AC Delco POS. I was using the 2 ton version and it worked great. The AC Delco 2 ton I have does not have the same lifting power as the HF. If I need to buy another one I am buying the orange HF 2 ton.
#12
Senior Member
iTrader: (39)
Re: Harbor Freight engine hoist
One of the magazines (I think Car Craft) did a test on HF's engine stands as to how much they could hold...test was done with a fork lift pressing down on a sbc block bolted to the stands ...and the HF stand was found to be the strongest. I forget the amount of force, it was a lot, but the stand didn't even break, the part that holds the engine just bent. Very impressive.
#13
Junior Member
Join Date: Aug 2011
Location: Upper NY
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Camaro
Engine: 350
Transmission: 700r4
Axle/Gears: 2.73
Re: Harbor Freight engine hoist
You can find the 99.99 coupon in a bunch of magazines. Pretty much any guy magazine will have coupons in it, but they'll be different in each magazine. Just go to walmart and troll the magazine section and you'll find one.
The gunmetal color is the color pittsburg changed them to, instead of the orange.
And last but not least, the other day, my store manager told me that pittsburg wrenches were now being made the same place as the new chinese craftsman stuff. No idea if that part is true or not, but intresting info for sure
The gunmetal color is the color pittsburg changed them to, instead of the orange.
And last but not least, the other day, my store manager told me that pittsburg wrenches were now being made the same place as the new chinese craftsman stuff. No idea if that part is true or not, but intresting info for sure
#14
Junior Member
Join Date: Aug 2011
Location: Upper NY
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Camaro
Engine: 350
Transmission: 700r4
Axle/Gears: 2.73
Re: Harbor Freight engine hoist
Oh, and I never had a problem putting the engine in my car with the 1 ton. the boom is short, but it wasn't too hard to do. I just took the nose and fender off to make room. Did this with a broken hand btw...
#17
Senior Member
Join Date: Sep 2003
Location: Hurlburt Field
Posts: 738
Likes: 0
Received 1 Like
on
1 Post
Car: 84 Z28, '15 Colorado
Engine: L69
Transmission: A4
Axle/Gears: 3.73
Re: Harbor Freight engine hoist
When I did my engine pull I already had the bumper removed, so luckily this wasn't a problem for me.
We also used this hoist to remove my friends engine in his Ranger. It BARELY worked.
Just an FYI for those that are thinking about buy the engine hoist.
#18
Supreme Member
iTrader: (1)
Join Date: Mar 2007
Location: Arlington, Tx
Posts: 3,525
Likes: 0
Received 6 Likes
on
5 Posts
Car: 91 Camaro RS
Engine: empty bay (for now)
Transmission: Built T-56
Axle/Gears: 3.42 stock posi disc
Re: Harbor Freight engine hoist
its possible with the 2 ton hoist. ive done it a hand full of times without removing the nose
#20
Supreme Member
iTrader: (5)
Join Date: Mar 2011
Location: Central Texas
Posts: 2,893
Likes: 0
Received 4 Likes
on
4 Posts
Car: GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: Aussie 9-bolt/3.27 posi
Re: Harbor Freight engine hoist
And I have yet to pull a nose on a good 3rd gen yet. Only time I have was when the nose was already smashed & I was pulling the engine. I pulled what was left off the nose off them cut the radiator support open si I didn't even have to lift it up very high either.
#21
Supreme Member
iTrader: (2)
Re: Harbor Freight engine hoist
Also the mods I made to my hoist are pretty extensive, I only have about 50% of the original hoist left LOL. I've also extended the two long bottom legs to be slightly longer than the hook arm to prevent tipping, It was half done in this pic and could BARELY lift a motor without tipping, I had to stand on the back which is really unsafe so I further modified it. If I had to do it again I'd get the two ton lift
#22
Junior Member
Join Date: Aug 2011
Location: Upper NY
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Camaro
Engine: 350
Transmission: 700r4
Axle/Gears: 2.73
Re: Harbor Freight engine hoist
For the money difference, I'd just take off the fender and nose and use the one ton. Its not that big a a deal to remove the nose and fender
#23
Member
Join Date: Apr 2008
Location: Macedon, near Rochester, NY.
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 TA (sold), 88 Corvette, 02 Monte
Re: Harbor Freight engine hoist
They work a lot better if you attach the chain bolt through a link closer to the hook instead of at the end of the chain. I was always hitting the end of the arm on the garage door trying to get it high enough.
#24
Supreme Member
Thread Starter
Join Date: Feb 2006
Location: St.Louis, IL
Posts: 1,366
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Camaro
Engine: 377
Transmission: TH350; Circle D 4200 converter
Axle/Gears: Ford 9"
Re: Harbor Freight engine hoist
There's not much of a money difference, really.. for the sake of making things easy and practical - I'd say it's $50 more that is well spent.
#25
Junior Member
Join Date: Aug 2011
Location: Upper NY
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Camaro
Engine: 350
Transmission: 700r4
Axle/Gears: 2.73
Re: Harbor Freight engine hoist
That is very true. $50 isn't alot of money. But, that same $50 is just about a tank of gas. IMO I'd rather pocket the 50.
#26
TGO Supporter
iTrader: (2)
Re: Harbor Freight engine hoist
Like you stated, there is ABSOLUTELY NO WAY you can get the engine out of our cars with the nose/bumper installed. The boom is way too short.
When I did my engine pull I already had the bumper removed, so luckily this wasn't a problem for me.
We also used this hoist to remove my friends engine in his Ranger. It BARELY worked.
Just an FYI for those that are thinking about buy the engine hoist.
When I did my engine pull I already had the bumper removed, so luckily this wasn't a problem for me.
We also used this hoist to remove my friends engine in his Ranger. It BARELY worked.
Just an FYI for those that are thinking about buy the engine hoist.
#28
Member
Join Date: Apr 2008
Location: Mt. Juliet, TN
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28
Engine: none
Transmission: none
Axle/Gears: 3.73
Re: Harbor Freight engine hoist
I've had issues with their hydraulics (on a few different items) bleeding down, I eventually replaced all my hydraulic harbor freight tools for safety reasons, when it came time to get an engine hoist I shopped elsewhere.
#29
Member
Join Date: Mar 2003
Location: Blackwood,NJ South Jersey
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 GTA
Engine: 350 TPI
Transmission: 700R4
Re: Harbor Freight engine hoist
So i know this is an old thread however, i plan on purchasing a 2 ton engine hoist from harbor freight. My question is, which 2 ton version works better on a thirdgen? Heres the specs on the 2 different 2 ton variations:
This 4000-lb. capacity foldable shop crane delivers the lift you need combined with the advantage of compact storage! The crane includes ram, chain and hook and is rated up to 2 tons. The foldable shop crane is easy to use and easy to store.
This 4000-lb. capacity foldable shop crane delivers the lift you need combined with the advantage of compact storage! The crane includes ram, chain and hook and is rated up to 2 tons. The foldable shop crane is easy to use and easy to store.
- Boom extends from 41 in. to 61-3/4 in.
- Crane height adjusts from 73-5/8 in. to 89 in.
- Clevis grab hook with safety latch
- Double ball bearing swivel casters
- Boom extends from 42 in. to 63-1/2 in.
- Crane height adjusts from 75-1/4 in. to 90-3/4 in
#30
Member
Join Date: Mar 2003
Location: Blackwood,NJ South Jersey
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 GTA
Engine: 350 TPI
Transmission: 700R4
Re: Harbor Freight engine hoist
Also, the car receiving the engine transplant has the knight rider front bumper which extends a few extra inches
#32
Junior Member
Join Date: Jul 2013
Location: Ofallon, MO
Posts: 67
Received 0 Likes
on
0 Posts
Car: 1985 TransAm
Engine: 4bbl 305
Transmission: Automatic
Re: Harbor Freight engine hoist
You can get some really good really good stuff from Harbor Freight....
Just do not buy Fire Extinguishers and Condoms.
Just do not buy Fire Extinguishers and Condoms.
#34
Junior Member
iTrader: (1)
Re: Harbor Freight engine hoist
Black Friday is almost here. I am scooping up one of these hoists so I was searching and found this thread. Figured I would bump since there is a very good point made. Buy the 2 ton hoist, the 1 ton is too short without having to take the whole front clip off! Same is true today as it was in 2012, the 1 ton hoist boom is way shorter than the 2 ton boom.
#35
Re: Harbor Freight engine hoist
I can't rem if I got my HF cherry picker back when it was just the catalog round here, cause I know my 1st HF stuff was that way or right when they opened up a local store but I've been using it for 20 or so years!
#37
Re: Harbor Freight engine hoist
i agree... just buy some metal stock and replace stock boom slide... i found i needed an extra 18” to drop my 351with trans in my sd f250 an no issues... i have the 2 ton so no issue with extra length...
way i figure it the 1 ton for most stock cars, the 2 ton for truks an racers
ghiaguy
#38
Supreme Member
Join Date: Jul 1999
Location: Adrian, Mi, USA
Posts: 1,551
Likes: 0
Received 25 Likes
on
20 Posts
Car: 1988 Pontiac Firebird Formula
Engine: 5.7 TPI
Transmission: 700R4
Re: Harbor Freight engine hoist
I bought my 2 ton harbor freight engine crane back in the early 80's. I still have it, and it still works just fine. I also have the engine stand I bought at the same time...... It still works just fine too. The finish isn't even that scratched up. (and it was well used and abused for many years.)
Thread
Thread Starter
Forum
Replies
Last Post