Hawks Third Generation
#1
Member
Thread Starter
Join Date: Sep 2005
Location: Jackson, Michigan
Posts: 136
Likes: 0
Received 1 Like
on
1 Post
Car: '87 IROC Z w/43,000 miles
Engine: 305 F code motor
Transmission: 4 speed auto
Axle/Gears: 3.73
Hawks Third Generation
Fair warning to all who pass here. Hawks Third Generation is full of , and I'm darn about it !!!
They are one of the sorriest, slowest, rip-off parts shipper's out there.
As I said to Hawks in a e-mail: "Screw me once, shame on you. You'll NEVER EVER get the chance to screw me again!"
Like I previously stated. Fair warning.
Cat 59
They are one of the sorriest, slowest, rip-off parts shipper's out there.
As I said to Hawks in a e-mail: "Screw me once, shame on you. You'll NEVER EVER get the chance to screw me again!"
Like I previously stated. Fair warning.
Cat 59
#2
Member
Most people here tend to think very highly of Hawks and their customer service. What exactly did they do (or not do) with their shipping to put you in such a disgruntled state? I've never personally dealt with them beyond a few emails concerning parts (and I wasn't too impressed by the fact that it took nearly two weeks to get a response in each case).
#3
To Cat 59 ,
your order was placed on the 23rd of NOV and is scheduled for delvery on the 12/2.Your card was charged as this is a drop ship item and most of our deleveries take 7-10 business days some times faster the 2nd of December makes 10 business days so we are right in line.I do not see why we are as bad as you say we are if there was a problem so bad i would think one would be mature enough to make a phone call instead of sending threating emails and website bashing,you should think about this as it effects more than one person and is a little uncalled for.feel free to call me to discuss further
To resto roc,
I am sorry if your email wasnt anwsered in a timely matter although i am not sure what it was about as I anwser 98% of the emails here which calculates to around 200-250 a day we are very busy and I think do extremely well on turn around time so if we were slow with you I am sorry, we look forward to you possibly being a customer in the near future.Thanks for your consideration.
To all of our satified and future customers,
I am not trying to get on the board and argue with anyone I like to think there are MANY satisfied customers out there and if there is ever ANY problem in the future ALL you need to do is call and discuss like a mature adult and it will be handled if there is ANY possibilityat all to fix the problem. PLEASE think about what we say or do before we do it.
If I am given every opportunity to rectify a problem and DO NOT I can understand a response as this but i do not think this was called for as well as Mr Cathcarts email.To all of you again first and formost thank you for your business and support.
Thanks,
Sincerely,
Bruce Hawkins
Hawks Third Generation
your order was placed on the 23rd of NOV and is scheduled for delvery on the 12/2.Your card was charged as this is a drop ship item and most of our deleveries take 7-10 business days some times faster the 2nd of December makes 10 business days so we are right in line.I do not see why we are as bad as you say we are if there was a problem so bad i would think one would be mature enough to make a phone call instead of sending threating emails and website bashing,you should think about this as it effects more than one person and is a little uncalled for.feel free to call me to discuss further
To resto roc,
I am sorry if your email wasnt anwsered in a timely matter although i am not sure what it was about as I anwser 98% of the emails here which calculates to around 200-250 a day we are very busy and I think do extremely well on turn around time so if we were slow with you I am sorry, we look forward to you possibly being a customer in the near future.Thanks for your consideration.
To all of our satified and future customers,
I am not trying to get on the board and argue with anyone I like to think there are MANY satisfied customers out there and if there is ever ANY problem in the future ALL you need to do is call and discuss like a mature adult and it will be handled if there is ANY possibilityat all to fix the problem. PLEASE think about what we say or do before we do it.
If I am given every opportunity to rectify a problem and DO NOT I can understand a response as this but i do not think this was called for as well as Mr Cathcarts email.To all of you again first and formost thank you for your business and support.
Thanks,
Sincerely,
Bruce Hawkins
Hawks Third Generation
#4
Member
Thread Starter
Join Date: Sep 2005
Location: Jackson, Michigan
Posts: 136
Likes: 0
Received 1 Like
on
1 Post
Car: '87 IROC Z w/43,000 miles
Engine: 305 F code motor
Transmission: 4 speed auto
Axle/Gears: 3.73
I STILL stand by my intial statement, no matter what Mr. Hawks' explination is.
Thank you.
Danny Cathcart, aka Cat 59.
Thank you.
Danny Cathcart, aka Cat 59.
#6
TGO Supporter
Cat59: You are free to your own opinion, but I would like to make the following points:
ANY time someone has had a problem with Hawk's, I've referred them directly to Bruce, the owner of Hawk's; to my knowledge, EVERY one of the issues I've referred to him has been handled promptly and professionally. I implore you to do a search here for posts relating to Hawk's Thirdgen.
I have a sneaking suspicion that you are not here to resolve your issue, however. I hope you will try to change that. We welcome all customers of third-gen related businesses to voice their opinions on this forum, but I highly recommend you tell us your story so that we can try to empathize with your frustration.
This forum is here to HELP others. It is not a place to bash others freely without cause or explanation. Please help us to understand what happened, and/or let us help you to fix it.
ANY time someone has had a problem with Hawk's, I've referred them directly to Bruce, the owner of Hawk's; to my knowledge, EVERY one of the issues I've referred to him has been handled promptly and professionally. I implore you to do a search here for posts relating to Hawk's Thirdgen.
I have a sneaking suspicion that you are not here to resolve your issue, however. I hope you will try to change that. We welcome all customers of third-gen related businesses to voice their opinions on this forum, but I highly recommend you tell us your story so that we can try to empathize with your frustration.
This forum is here to HELP others. It is not a place to bash others freely without cause or explanation. Please help us to understand what happened, and/or let us help you to fix it.
#7
Member
Thread Starter
Join Date: Sep 2005
Location: Jackson, Michigan
Posts: 136
Likes: 0
Received 1 Like
on
1 Post
Car: '87 IROC Z w/43,000 miles
Engine: 305 F code motor
Transmission: 4 speed auto
Axle/Gears: 3.73
I will when I have calmed down. At the moment, to speak my mind, wouldn't do anyone any good.
Cat
Cat
Trending Topics
#8
Whats strange is that your 1st post on this site is NEGATIVE...
One would only question everything your saying?
You come on here slandering a company with no valid points. You feel the need to post slander/ and not even go into detail about everything?
I have talked with Bruce many of times about suguestions on my car and have ordered from them before. No problem at all...
Besides we are all Human and make mistakes! Every company has done it and will. As you and we all make mistakes~ They have a great reputation and as I get extra money I will buy from them with no hesitation.
One would only question everything your saying?
You come on here slandering a company with no valid points. You feel the need to post slander/ and not even go into detail about everything?
I have talked with Bruce many of times about suguestions on my car and have ordered from them before. No problem at all...
Besides we are all Human and make mistakes! Every company has done it and will. As you and we all make mistakes~ They have a great reputation and as I get extra money I will buy from them with no hesitation.
Last edited by shawn18jgr; 12-04-2005 at 04:08 AM.
#9
Supreme Member
iTrader: (7)
Join Date: Mar 2001
Location: Fort Mill, SC, USA
Posts: 6,420
Likes: 0
Received 4 Likes
on
4 Posts
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Pick up the phone. Bruce handled his response respectfully, why can't you? Hawk's is one of the few dealers who actually care enough to respond to you here so give him some credit.
Someone's got a lot to learn...
Ed
Someone's got a lot to learn...
Ed
#10
Supreme Member
iTrader: (1)
Join Date: Feb 2003
Location: Austin, Tx
Posts: 1,493
Received 57 Likes
on
42 Posts
Car: 91 Z28
Engine: LS1
Transmission: T-56
Axle/Gears: 3.73 Hawks 8.8
Without Hawks, I don't know where I would be. Bruce is always helpfull when I call (which in his mind is too often im sure ) and I've never had a problem with a product or service he is providing.
He even dug up bolts I needed that he didnt even normally sell.
I'm thinking the original poster maybe have had a bad experience, but without any sort of explaination, I call on him.
Don't take it to heart bruce, you know the rest of us love you
He even dug up bolts I needed that he didnt even normally sell.
I'm thinking the original poster maybe have had a bad experience, but without any sort of explaination, I call on him.
Don't take it to heart bruce, you know the rest of us love you
#11
Member
Join Date: Sep 2005
Location: Midwest
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 383 LT1
Transmission: T56
Axle/Gears: 4.10
I am pretty disappointed in Cat 59 for not being able to talk to Bruce and work out his issue. (notice he bashes Hawks and we still dont know why?)
I bought my entire LT1 drivetrain from Hawks a few years back and random parts since. I have never had a problem and was very impressed with his customer service.
I was always happy with Hawks service, speed, and quality of the parts. I would never hesitate in buying anything from Bruce. I encourage others to buy from him, he is a good person to do business with.
I bought my entire LT1 drivetrain from Hawks a few years back and random parts since. I have never had a problem and was very impressed with his customer service.
I was always happy with Hawks service, speed, and quality of the parts. I would never hesitate in buying anything from Bruce. I encourage others to buy from him, he is a good person to do business with.
#12
Junior Member
Re: Hawks Third Generation
Originally posted by Cat59
Fair warning to all who pass here. Hawks Third Generation is full of , and I'm darn about it !!!
They are one of the sorriest, slowest, rip-off parts shipper's out there.
Cat 59
Fair warning to all who pass here. Hawks Third Generation is full of , and I'm darn about it !!!
They are one of the sorriest, slowest, rip-off parts shipper's out there.
Cat 59
I have purchased parts from Bruce and his company since 2002 or so. I've always been VERY pleased, I have even stopped by many times on my way down I-85 in SC just to visit with them. They are a great example of a family owned business. They take their business to Carlisle and Charlotte shows every year. They have a good reputation and I feel it is very much deserved.
My 'other' car has kept me quite distracted on other forums... no forum rookie here. But one thing I have seen on these other forums are vendor issues so I'm glad to see a review section here.
Everyone can have an issue with ANY vendor, but you have to give that vendor the chance to respond to your issue before you should be blasting them in a Vendors Review Forum.
The whole aftermarket internet business for us gearheads is dependent upon two way conversation. If you can't get resolution THEN speak your peace here. I think that is the minimum you owe your fellow forum members AND the vendor. Just my opinion. My .02 cents worth. YMMV.
Yep.
Knowing Bruce, he'd have made you happy had you given him the opportunity. He'd probably make you happy now if you asked something realistic of him. He is one of the FEW that really is the sort of company we all like to deal with.
Gerry Massie-
Norfolk, VA
Last edited by gerrym; 01-31-2006 at 03:19 PM.
#13
I have dealt with hawks on several occasions and everytime I always get all my questions answered. In the past year I have spent over 4k at hawks, and have been pleased with every single part , and the serrvice has been fantastic. Granted some parts took a long time to get to me, but then again they were custom fiberglass pieces and that is totally understandable. So to me i guess its strange that with so many happy customers, why wouuld hawks just pick to screw u over and not show any support outta nowhere the way ur claiming they did?
#15
Member
Join Date: Apr 2004
Location: Springfield Ohio
Posts: 185
Received 0 Likes
on
0 Posts
Car: 92 RS
I have been purchasing from HAWKS since 01 or 02 and have yet to be dissatisfied. If it weren't for Bruce the might not even be any inovation in the aftermarket for thirdgens as it is today. Spohn is only one man. Roc on Bruce.
#16
Supreme Member
iTrader: (7)
Join Date: Mar 2001
Location: Fort Mill, SC, USA
Posts: 6,420
Likes: 0
Received 4 Likes
on
4 Posts
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Judging by the lack in response from the original poster, I don't have much faith in his hasty claim.
Ed
Ed
#17
Junior Member
Well... he did say he needed to calm down first. Maybe that will take a while longer ??
So much is done is haste and anger... 'tis a shame... but I won't sit by and let someone trash a vendor that I do business with all the time. Especially Bruce. He's an exception, period.
Gerry-
Norfolk, VA
'89 GTA Convertible
So much is done is haste and anger... 'tis a shame... but I won't sit by and let someone trash a vendor that I do business with all the time. Especially Bruce. He's an exception, period.
Gerry-
Norfolk, VA
'89 GTA Convertible
#18
Member
Join Date: Sep 2005
Location: Yuma, Arizona
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 camaro RS
Engine: 350,vortech heads,zz4 cam,3:73 posi trac,edelbrock carb,wiend stealth intake,raven mufflers,hooker supercomp shorty headers and y-pipe.
Transmission: th700r4
Ah man and I thought they were a good place to buy items from? I was actually thinking about buying a 91 spoiler from that web site...
#19
Senior Member
iTrader: (1)
Join Date: Sep 2001
Location: Mechanicsburg,Pa usa
Posts: 643
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92'Camaro RS
Engine: a loud one
Transmission: bolted to the engine
I've dealt with Hawks when i bought my 5" spoiler. It really didn't fit right at all and i was pretty upset about it. They were very nice about it and said if i wanted to, i could send it back and they'de send me another one. A buddy of mine does body work and got it to work for me. Over all i was very pleased with Hawks and definitly wouldn't have a problem doing business again with them in the future.
#20
Supreme Member
Join Date: Sep 1999
Location: Oakville, Ct
Posts: 1,383
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991Firebird T/A
Engine: 350
Transmission: Modified Viper t-56
Axle/Gears: dana 44, 3.55
picked up a headliner/sail panel/visor kit from them - was happy with the cost, was a drop ship item, so it took some time, ubt over all it wasnt a bad wait
#21
Member
Join Date: Sep 2005
Location: Yuma, Arizona
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 camaro RS
Engine: 350,vortech heads,zz4 cam,3:73 posi trac,edelbrock carb,wiend stealth intake,raven mufflers,hooker supercomp shorty headers and y-pipe.
Transmission: th700r4
Good to hear, I'm a little more open minded about they're web site
#24
Supreme Member
iTrader: (1)
Join Date: Sep 2000
Location: St. Louis, MO
Posts: 1,061
Likes: 0
Received 0 Likes
on
0 Posts
Car: '91 GTA
Engine: 402ci LS2
Transmission: faceplated T56
Axle/Gears: 9" w/ 4.11's
Bruce is the man... VERY helpful. Without him, Neil ( ) and everyone else at Hawks, my LS1 swap would have never been completed!
#25
Supreme Member
Join Date: Aug 1999
Location: Lowell, MA
Posts: 1,437
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro RS
Engine: sbc 400
Transmission: th350
great to see so many people standing behind one company. it says a lot about that company and the community it supports.
#28
Senior Member
Join Date: Jul 2005
Location: Various barns
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro RS, 72 Camaro SS
Engine: 305TBI, til it pukes
Transmission: Auto
I've dealt with Hawks when i bought my 5" spoiler. It really didn't fit right at all and i was pretty upset about it
#32
Supreme Member
iTrader: (3)
Join Date: May 2004
Location: Brighton, CO
Posts: 4,345
Likes: 0
Received 1 Like
on
1 Post
Car: '72 Chevy Nova
Engine: Solid roller 355
Transmission: TH350
Axle/Gears: 8.5" 10-bolt 3.73 Posi
Originally posted by CYARS92
I'm thinking of buying one of these this month, has anyone else had a problem with the fit? Bruce, don't they all come out of the same mold/pattern? Why would one fit better than the other?
I'm thinking of buying one of these this month, has anyone else had a problem with the fit? Bruce, don't they all come out of the same mold/pattern? Why would one fit better than the other?
#33
Senior Member
iTrader: (1)
Join Date: Sep 2001
Location: Mechanicsburg,Pa usa
Posts: 643
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92'Camaro RS
Engine: a loud one
Transmission: bolted to the engine
One more thing about the spoiler that i bought from Hawks. I forgot to mention in all fairness to them, i did buy the spoiler within a month or two of them coming out. So i am sure since then they've had plenty of time to tweek things to get them to fit better. Another thing , i really don't see many companies out there even trying to create new things for thirdgens that much.Without Hawks in a way, everybodies car would look just about the same.
#34
Supreme Member
Join Date: Jul 2003
Location: any clime or place...
Posts: 2,779
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
i've never had any problems with hawks. ordered my slp rims from them, even though it was cheaper to go through slp directly.
there aren't many ppl like Bruce left out there fellows.
pretty excited when i got stationed in NC, but to find out Easley, SC is in the most western part of SC oh well, only 400 miles, haha.
Still have any t-56 conversions for sale Bruce?
thanks for being a good hearted honest businessman, carrying on the american spirit.
brandon
there aren't many ppl like Bruce left out there fellows.
pretty excited when i got stationed in NC, but to find out Easley, SC is in the most western part of SC oh well, only 400 miles, haha.
Still have any t-56 conversions for sale Bruce?
thanks for being a good hearted honest businessman, carrying on the american spirit.
brandon
#35
Supreme Member
iTrader: (9)
I think his prices for the small odds and ends are a little high but, his customer service evens it out.. incase no ones has noticed but, 99% of companys could care less about the customer anymore. I am debating on buying from them in the spring but, the question is not if he is a good guy just pricing
#36
All upset and dont even mention your actual problem.
I bought a 4th gen spoiler from Hawks and one of the tips on it were a little cracked from shipping, I didn't complain about it and it wasn't worth shipping it back. It really didn't bother me. I probably should have called them anyway but i was too excited about how cool the spoiler was. Also, bought a fender and a ground effect from hawks. The shipping sometimes can take a while but really it was faster than what i expected. So, overall I give Hawks a rating of 9.3 on a 10 point scale. Oh and my next hood will be from Hawks Third Gen...
I bought a 4th gen spoiler from Hawks and one of the tips on it were a little cracked from shipping, I didn't complain about it and it wasn't worth shipping it back. It really didn't bother me. I probably should have called them anyway but i was too excited about how cool the spoiler was. Also, bought a fender and a ground effect from hawks. The shipping sometimes can take a while but really it was faster than what i expected. So, overall I give Hawks a rating of 9.3 on a 10 point scale. Oh and my next hood will be from Hawks Third Gen...
#37
Member
Join Date: May 2005
Location: Goose Creek, SC
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Trans Am
Engine: 434 being built
Transmission: 700R4
Axle/Gears: 3:73
Whats up lately
I called & left three different messages over the last several weeks & not one call was returned.
#38
TGO Supporter
Send a private message to Bruce Hawkins, he's the owner there and should be able to help sort out your issue. He will likely respond here as well. Just leave some contact info.
Bruce's PM: https://www.thirdgen.org/techbb2/pri...e&userid=13585
Bruce's PM: https://www.thirdgen.org/techbb2/pri...e&userid=13585
#39
Hi,
this is Bruce we are EXTREMELY busy right now,it says on the message not to leave a message and please call back due to the amount of busuiness versus employees,we are just not able to return phone calls at this time due to the amount of time we have in a day,we are working on changing that at this time but we are short handed. We defenatly want to help you with your order please be patiant at this time and try to call back in the morning is the best time to reach us, but I promise we will be more than happy to help you with your order.
Sincerely,
Bruce Hawkins
www.hawksthirdgenparts.com
this is Bruce we are EXTREMELY busy right now,it says on the message not to leave a message and please call back due to the amount of busuiness versus employees,we are just not able to return phone calls at this time due to the amount of time we have in a day,we are working on changing that at this time but we are short handed. We defenatly want to help you with your order please be patiant at this time and try to call back in the morning is the best time to reach us, but I promise we will be more than happy to help you with your order.
Sincerely,
Bruce Hawkins
www.hawksthirdgenparts.com
#40
Supreme Member
iTrader: (9)
well, I can't say anything good so far............
I ordered a gear for my speedo and I told bruce I needed one for an electric speedo firebird 1989 specifically with 3.70 gears. I told him it used to be orange and was 21 teeth.. and sould have came on the 85-86 firebirds with 3.70 gears and a few other through out the years.
he said yes he has one and says it is a very hard to find part bla bla and it was goining to cost 25.00 and then 10.00 shipping
I was going to make my own but, I figured I had the money in paypal so why not get the right part and be done with it
so I order the gear with the 10.00 shipping and again I make sure he knows it needs to be a for the 1989 firebird with electric speedo and the tooth count needed by putting this info in the note box, 35.00 and over a week later I get the box from ups and guess what is inside......
a red cable speedo gear..... not only is this gear very very easy to find and still made even by gm but, it looks like the ones I have are in better shape than this one (which looks like it is brittle and sat in the sun for half it's life)
so I contact bruce send him a picture of his gear and my electric speedo gear and nicely explain he sent the wrong gear. now he says I need to send his gear and my gear back so he can match one up what the heck for 35.00 I should have gotten the right part the first time and now I need to ship this part back at my cost and I am sure wait well over a week again and hope he does not loose my gear 22 tooth at the same time.
I ordered a gear for my speedo and I told bruce I needed one for an electric speedo firebird 1989 specifically with 3.70 gears. I told him it used to be orange and was 21 teeth.. and sould have came on the 85-86 firebirds with 3.70 gears and a few other through out the years.
he said yes he has one and says it is a very hard to find part bla bla and it was goining to cost 25.00 and then 10.00 shipping
I was going to make my own but, I figured I had the money in paypal so why not get the right part and be done with it
so I order the gear with the 10.00 shipping and again I make sure he knows it needs to be a for the 1989 firebird with electric speedo and the tooth count needed by putting this info in the note box, 35.00 and over a week later I get the box from ups and guess what is inside......
a red cable speedo gear..... not only is this gear very very easy to find and still made even by gm but, it looks like the ones I have are in better shape than this one (which looks like it is brittle and sat in the sun for half it's life)
so I contact bruce send him a picture of his gear and my electric speedo gear and nicely explain he sent the wrong gear. now he says I need to send his gear and my gear back so he can match one up what the heck for 35.00 I should have gotten the right part the first time and now I need to ship this part back at my cost and I am sure wait well over a week again and hope he does not loose my gear 22 tooth at the same time.
#43
Well,
I just bought some seats through them and am very happy. I dealt with Bruce the whole time he was the front line man.
He kept me updated throughout the transaction. Sent me email pics when they came back from the upolstry shop. The seats arrived flawless and beautiful. Thats because they went the extra step to see they were wrapped good.
He was there to answer my questions anytime...
When I was installing them I thought I had an issue with the power seats not working come to find out it was user error. He walked me through ever step of the way.
If this isn't good service then I don't know what anyone would expect from a company.
For me I will order again and again...Their everything I could want in a company I would buy from.
Yes, they are busy they are aloud to be! Not one single company is perfect. People just need to learn how to work with others to solve problems. Thanks Bruce and Hawks if your reading this fo all your help! Shawn
I just bought some seats through them and am very happy. I dealt with Bruce the whole time he was the front line man.
He kept me updated throughout the transaction. Sent me email pics when they came back from the upolstry shop. The seats arrived flawless and beautiful. Thats because they went the extra step to see they were wrapped good.
He was there to answer my questions anytime...
When I was installing them I thought I had an issue with the power seats not working come to find out it was user error. He walked me through ever step of the way.
If this isn't good service then I don't know what anyone would expect from a company.
For me I will order again and again...Their everything I could want in a company I would buy from.
Yes, they are busy they are aloud to be! Not one single company is perfect. People just need to learn how to work with others to solve problems. Thanks Bruce and Hawks if your reading this fo all your help! Shawn
Last edited by shawn18jgr; 03-12-2006 at 01:33 AM.
#44
Supreme Member
iTrader: (9)
well just letting everyone know how it is going. yes, I am kinda pissed I not only made a point several times what I specifically needed. and having to pay for his mistake is like another slap in the face.
I will let everyone know how this turns out as everything progresses.
buisy or not makes no differance. if you pay top dollar for a part you should get top dollar service. or the right part you asked for specifically
I will let everyone know how this turns out as everything progresses.
buisy or not makes no differance. if you pay top dollar for a part you should get top dollar service. or the right part you asked for specifically
#45
Member
iTrader: (10)
Join Date: Jul 1999
Location: Central Wisconsin
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
I am here to come to the defense of Bruce and his company as well.
I was one of the people who bought one of the high rise spoilers he offered first. He warned that it might not fit my car right as the 88 models are kinda different as to how they mount.
But no, I wouldn't listen.. Oh I can make it work ok.
No I couldn't.... Was it his fault? NO!!
But what did he do for me? Accepts the parts back and makes new ones just for me so they would fit my car right!
If that isn't service I don't know what is. I would buy from him anytime, he is a stand up guy, that is obvious from his responses here in this thread even.
I was one of the people who bought one of the high rise spoilers he offered first. He warned that it might not fit my car right as the 88 models are kinda different as to how they mount.
But no, I wouldn't listen.. Oh I can make it work ok.
No I couldn't.... Was it his fault? NO!!
But what did he do for me? Accepts the parts back and makes new ones just for me so they would fit my car right!
If that isn't service I don't know what is. I would buy from him anytime, he is a stand up guy, that is obvious from his responses here in this thread even.
#46
Member
Join Date: Oct 2005
Location: SOCAL
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro
Engine: LS1
Transmission: T56
You may have had a bad experience but i have NEVER had a problem with Bruce. I had a few issues with my LS1 swap i did this summer and he went above and beyond to help me.
Justin
Justin
#47
Supreme Member
Join Date: Sep 2005
Location: Osceola Indiana
Posts: 2,151
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 RS(sold) 1989 IROC-Z
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: ones that turn
I love Hawks last time I ordered from there I got my stuff sooner than I ever expected. I have never delt with a better company in my life. Im always sending them emails with questions about there products, and they always answer, and know what they are talking about. I have, and will probaly always get all of my third gen parts from Hawks(except for the quick junkyard runs) lol).
#48
Member
Join Date: Apr 2002
Location: charleston,SC
Posts: 358
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Camaro RS (IROC-Z Clone)
Engine: LO3
Transmission: T-5
Axle/Gears: 3.08
Hawks,
You don't know me (yet), but ive been a customer in the past, very pleased with what I got and am currently starting a camaro resotoration. There is no other company ill stand behind other then yours when it comes to honest, quality, and good priced products for my 3rd gen. Posts like these are not a accurate reflection upon your buisness and will not affect your loyal customers like myself.
I look forward to our future buisness transactions together, take care
Aaron
You don't know me (yet), but ive been a customer in the past, very pleased with what I got and am currently starting a camaro resotoration. There is no other company ill stand behind other then yours when it comes to honest, quality, and good priced products for my 3rd gen. Posts like these are not a accurate reflection upon your buisness and will not affect your loyal customers like myself.
I look forward to our future buisness transactions together, take care
Aaron
#50
Member
Join Date: May 2004
Location: Streamwood, IL
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: TPI 5.7 L
Transmission: 4L60 w/Vigilante 2,400 Stall
Axle/Gears: Girdled 10 bolt/3.23's
I've only had one experience with Hawks but it was excellent. My column was stripped about a year ago and I couldn't find another locally. They gave me a better price shipped overnight than what they wanted locally if they would have had one around here. The Z was good as new the following day. Thanks Hawks!!!