come on guys... TBI nitrous
08-01-2002, 05:34 AM
#1
Member
Thread Starter
Join Date: Jan 2002
Location: Plano, TX
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
come on guys... TBI nitrous
i've posted this abuot 3 times, and the only response i got was from 305TBIcamaro, and i e-mailed him and he never responded! where and how do i tap into the fuel line for a wet nitrous system?
:hail:
:hail:
:hail:
:hail:
:hail:
:hail:
:hail:
:hail:
:hail:
:hail:
08-01-2002, 03:07 PM
#2
TGO Supporter
Join Date: Jul 2001
Location: Cheyenne, Wyoming
Posts: 4,991
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 B4C 1LE
Engine: Proaction 412, Accel singleplane
Transmission: built 700R4 w/custom converter
Axle/Gears: stock w/later 4th gen torsen pos
did you buy it used? without instructions? is it made specifically for TBI or is it a universal TBI? what brand? plate or nozzle? how many nozzles?
08-01-2002, 04:06 PM
#3
Member
Thread Starter
Join Date: Jan 2002
Location: Plano, TX
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
the only instructions it has is a diagram that shows a "T" fitting, but doesnt shows where to T it. its a plate system, but whether it is plate or nozzle doesnt matter on where you are getting fuel from. one spray bar, one line in is fuel, other line in is nitrous
08-01-2002, 04:25 PM
#4
Senior Member
Join Date: Dec 2001
Location: Chandler AZ
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
You just have to tap into the larger of the two fuel lines. Just make sure you can run a line from where you tap the fuel line to the nitrous plate.
I tapped one of the fuel lines (the larger one) that was next to the steering shaft and ran the nitrous fuel line from there.
I tapped one of the fuel lines (the larger one) that was next to the steering shaft and ran the nitrous fuel line from there.
Thread
Thread Starter
Forum
Replies
Last Post