Turbo help
#1
Member
Thread Starter
Join Date: Jan 2009
Location: Lansing NC 28643
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Firebird, 89 Bird, 86 Bird
Engine: None, 5.7, 5.0 L.O.
Transmission: None, T5, Thm 350
Axle/Gears: 3.23, 02' 3.43 rear disc, ???
Turbo help
So I have no knowledge at all abt turbos but I bought a 80 turbo 301 for $125 everything i looked up says the 301 is well terrible but it was the complete motor so I thought maybe I could use the turbo setup for sbc does anyone have any suggestions or if it could even work it would be nice
#2
Re: Turbo help
Nothing from that motor will fit the SBC, I forget if thats a pontiac or olds sourced motor but I know it's not a chevy.
The turbo is likely to small for good power on any 5 liter or larger motor and is very much out dated anyway.
You might be able to turn a profit if you sell it to a collector/restorer but otherwise it was a pretty pointless aqusition.
I'm not sure where the old turbo ta's fell short but with tuning and a better turbo they might make good power, but in a world of 455 pontiacs and cheap SBC's they never caught on, the turbo buick didnt catch on until EFI and half a decade of refinement later.
The turbo is likely to small for good power on any 5 liter or larger motor and is very much out dated anyway.
You might be able to turn a profit if you sell it to a collector/restorer but otherwise it was a pretty pointless aqusition.
I'm not sure where the old turbo ta's fell short but with tuning and a better turbo they might make good power, but in a world of 455 pontiacs and cheap SBC's they never caught on, the turbo buick didnt catch on until EFI and half a decade of refinement later.
#3
Member
Thread Starter
Join Date: Jan 2009
Location: Lansing NC 28643
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Firebird, 89 Bird, 86 Bird
Engine: None, 5.7, 5.0 L.O.
Transmission: None, T5, Thm 350
Axle/Gears: 3.23, 02' 3.43 rear disc, ???
Re: Turbo help
most of it was tuning and the lack of a higher octane unleaded fuel. It has an integral wastegate that only let it build 8 psi of boost. I was looking at the way its all put together and if I make a plate I can adapt it to a sbc intake. The new Grant turbo the previous owner put on it is all but outdated lol, but I honestly appreciate your input.
Thread
Thread Starter
Forum
Replies
Last Post
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
2
09-28-2015 12:35 AM