Power Adders Getting a Supercharger or Turbocharger? Thinking about using Nitrous? All forced induction and N2O topics discussed here.

Turbo or super for a multiport injection v6

Thread Tools
 
Search this Thread
 
Old 01-01-2024, 02:16 PM
  #1  
Junior Member
Thread Starter
 
Tibian's Avatar
 
Join Date: Dec 2023
Location: Knightdale, NC
Posts: 7
Received 0 Likes on 0 Posts
Car: 1985 Pontiac Firebird
Engine: 2.8l V6
Turbo or super for a multiport injection v6

Hello all, I’m new. I recently acquired an 85 firebird with the multiport injection V6, and I was wondering if there are any turbo or supercharger options for this engine. I’m not interested in any swap or major changes to the engine, just looking to see if there are any power options for it. I’m not desperate for power, so if there aren’t any options, I won’t be too upset.
Old 01-01-2024, 03:16 PM
  #2  
Supreme Member

iTrader: (14)
 
aliceempire's Avatar
 
Join Date: Nov 2008
Location: Milwaukee
Posts: 2,001
Received 142 Likes on 118 Posts
Car: 92 Firebird, 77 Trans Am SE, 86 Z28
Engine: 5.7 HSR, T/A 6.6, empty
Transmission: T-5, TH350, T-5
Axle/Gears: 3.08 posi, 3.23 posi, 3.23
Re: Turbo or super for a multiport injection v6

You can build a turbo kit or find a way to mount a centrifugal supercharger for just about anything these days but the bigger question is, how do you plan on tuning it? Are you ready for that type of work? Tuners for this vintage car are a rarity. Diy is how most thirdgen owners go about it.
Old 01-07-2024, 02:25 PM
  #3  
Junior Member
Thread Starter
 
Tibian's Avatar
 
Join Date: Dec 2023
Location: Knightdale, NC
Posts: 7
Received 0 Likes on 0 Posts
Car: 1985 Pontiac Firebird
Engine: 2.8l V6
Re: Turbo or super for a multiport injection v6

@aliceempire i don’t have any experience with power adders at this point, so I don’t know what all goes into it. I didn’t know if my engine came as a turbo option, whereas you could put that turbo setup on your non turbo engine. And can you offer any advice for the diy route? Any places to check for information or anything?
Old 01-07-2024, 02:38 PM
  #4  
Supreme Member

iTrader: (14)
 
aliceempire's Avatar
 
Join Date: Nov 2008
Location: Milwaukee
Posts: 2,001
Received 142 Likes on 118 Posts
Car: 92 Firebird, 77 Trans Am SE, 86 Z28
Engine: 5.7 HSR, T/A 6.6, empty
Transmission: T-5, TH350, T-5
Axle/Gears: 3.08 posi, 3.23 posi, 3.23
Re: Turbo or super for a multiport injection v6

Honestly, old threads in this forum have the wealth of information. It's a lot to get into. If you haven't done tuning in the past on NA applications, tuning on boosted applications is a bigger uphill battle. Can you weld and fabricate? Those will be necessary. It's a real project to take on, if you really want to do it. Cheaper and easier project is to add nitrous. Even cheaper and easier is to just drive it as is, if you want to go faster buy a second car. I highly suggest checking through the v6 and power adders sections of this forum, that'll help you figure out if it's beyond your scope or something you want to learn.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
howard618
Power Adders
1
05-10-2011 05:07 PM
89camaroRS6
Power Adders
2
10-15-2007 09:26 PM
blackdemon89ta
Engine Swap
2
10-16-2006 11:46 PM
ReallySexyRS
Power Adders
3
08-25-2005 02:33 PM
eric m 91 rs
Power Adders
1
07-31-2003 08:47 PM



Quick Reply: Turbo or super for a multiport injection v6



All times are GMT -5. The time now is 03:35 PM.