Third Generation F-Body Message Boards

Search: Posts Made By: jizzyz28
Showing results 1 to 47 of 47
Search took 0.18 seconds.
Forum: TPI
12-10-2002, 09:09 PM
Replies: 22
Views: 1,379
Posted By jizzyz28

Accel sells an aftermarket plemun, runners, and...

Accel sells an aftermarket plemun, runners, and baseplate
Forum: Tech / General Engine
12-10-2002, 09:04 PM
Replies: 2
Views: 384
Posted By jizzyz28

on my 91 it is right above the oil filter

on my 91 it is right above the oil filter
Forum: Tech / General Engine
12-10-2002, 08:59 PM
Replies: 18
Views: 809
Posted By jizzyz28

Those look like hedmans

Those look like hedmans
Forum: Car Audio
11-25-2002, 12:19 AM
Replies: 9
Views: 402
Posted By jizzyz28

I have a sony in my car also, behind the face...

I have a sony in my car also, behind the face there should be a tiny tiny button thats the reset button. If that doesn't work or there isn't one unplug it and see what happens.
Forum: Tech / General Engine
11-20-2002, 12:20 AM
Replies: 13
Views: 1,429
Posted By jizzyz28

hey man i finally found the right size belt for...

hey man i finally found the right size belt for my 350 after removing the smog pump. the dayco part number is 5060960
Forum: Tech / General Engine
11-08-2002, 08:32 PM
Replies: 21
Views: 843
Posted By jizzyz28

turn the blades on cut off the car when they are...

turn the blades on cut off the car when they are half way up, then take the blade bend it in half take a flathead and pop them off
Forum: Tech / General Engine
11-08-2002, 08:29 PM
Replies: 6
Views: 514
Posted By jizzyz28

go ahead and run synthetic and you will also get...

go ahead and run synthetic and you will also get more horsepower not enough to tell though
Forum: Tech / General Engine
11-08-2002, 08:26 PM
Replies: 17
Views: 657
Posted By jizzyz28

unplug the o2 sensor

unplug the o2 sensor
Forum: Tech / General Engine
11-08-2002, 08:19 PM
Replies: 5
Views: 802
Posted By jizzyz28

camaros have a problem of losing vacuum in the...

camaros have a problem of losing vacuum in the heating check the pressure in the lines
Forum: Tech / General Engine
11-08-2002, 08:16 PM
Replies: 2
Views: 333
Posted By jizzyz28

its normal to be a little yellow. if they are...

its normal to be a little yellow. if they are black the car is to rich, mine come out white with a little burnt spot. being yellow i would figure the car is running a little better, not as rich
Forum: Tech / General Engine
11-08-2002, 08:14 PM
Replies: 14
Views: 433
Posted By jizzyz28

before i put my thermomaster chip in i went ahead...

before i put my thermomaster chip in i went ahead and got the 160 thermostat so i wouldn't have to worry about it when i got the chip and my car ran fine
Forum: Tech / General Engine
11-06-2002, 03:53 PM
Replies: 2
Views: 347
Posted By jizzyz28

no it's a tpi but it's got me confused

no it's a tpi but it's got me confused
Forum: TPI
11-03-2002, 09:32 PM
Replies: 18
Views: 2,000
Posted By jizzyz28

they make a socket for the 02 sensor. you might...

they make a socket for the 02 sensor. you might want to warm the engine up and get a breaker bar.
Forum: Tech / General Engine
11-03-2002, 09:27 PM
Replies: 2
Views: 347
Posted By jizzyz28

problem off the line

ok guys heres the problem i just had my trans built up real nice, now my car is stumbling at idle when it warms up. i did a tune up, replaced the ignition module, you know the whole nine yards and it...
Forum: Suspension and Chassis
11-03-2002, 09:16 PM
Replies: 5
Views: 511
Posted By jizzyz28

i appreciate the help guys, and i know i...

i appreciate the help guys, and i know i misplaced the question i wasn't paying any attention when i put it on the site
Forum: Suspension and Chassis
10-27-2002, 09:42 PM
Replies: 5
Views: 511
Posted By jizzyz28

cleaning the block

i am about to clean my engine block, i need to know if you guys have heard or know anything about cleaning with kerosene. i know you have too use 4 1/2 qts of 10w oil and 1/2qt of kerosene. I heard...
Forum: Suspension and Chassis
10-27-2002, 09:39 PM
Replies: 4
Views: 428
Posted By jizzyz28

I used eibach springs 1.6 around and it handles...

I used eibach springs 1.6 around and it handles great and looks great. I also used lakewood shocks and 70/30 struts, and it rides good and the street and great at the track!
Forum: Cooling
10-22-2002, 01:28 AM
Replies: 17
Views: 1,316
Posted By jizzyz28

I almost got an electric water pump until i found...

I almost got an electric water pump until i found out the life span for them. around 50 hours, good for a strictly track car but not for a street car. If you find anything else about them let me know...
Forum: TPI
09-26-2002, 01:34 PM
Replies: 20
Views: 2,165
Posted By jizzyz28

90-92 tps are self calibrated so you can't adjust...

90-92 tps are self calibrated so you can't adjust tem, but you can get one for like a 88 which will be slotted so i would go with it
Forum: Transmissions and Drivetrain
09-07-2002, 12:36 AM
Replies: 9
Views: 646
Posted By jizzyz28

the driveshaft would be a good idea, b/c you can...

the driveshaft would be a good idea, b/c you can more power to the ground, thats the biggest purpose. but i am not to sure about that flywheel its seems it would bend easily after getting so hot,...
Forum: TPI
09-07-2002, 12:22 AM
Replies: 3
Views: 742
Posted By jizzyz28

i have a bbk/edelbrock 58mm TB and they claim...

i have a bbk/edelbrock 58mm TB and they claim 1000-1050 also
Forum: TPI
09-07-2002, 12:19 AM
Replies: 5
Views: 590
Posted By jizzyz28

I know saying it made my car run hotter with it...

I know saying it made my car run hotter with it on is kinda strange since it is a cooler. But the way they are from the factory aren't really good to begin with, and for some reason they do make your...
Forum: TPI
09-04-2002, 01:25 AM
Replies: 7
Views: 530
Posted By jizzyz28

Hell i jumped to a 58mm on my 350 TPI but i broke...

Hell i jumped to a 58mm on my 350 TPI but i broke into my plenum shortly after and ported it out to match the TB and shaped it down to get as much pressure as possible through the runner. It was a...
Forum: TPI
09-04-2002, 01:20 AM
Replies: 5
Views: 590
Posted By jizzyz28

I have a 91 TPI 350 and mine has an oil cooler,...

I have a 91 TPI 350 and mine has an oil cooler, but i am about to unhook it b/c they make your car run hotter.
Forum: Transmissions and Drivetrain
09-04-2002, 01:17 AM
Replies: 5
Views: 2,719
Posted By jizzyz28

this is what i did

I had my 700 built up from borg warner performane parts, I redid everything bigger gears, power bands, added 4 clutches, 2400 stall, performance torque convertor, the whole nine yards. I haven't had...
Forum: TPI
09-02-2002, 06:26 PM
Replies: 6
Views: 480
Posted By jizzyz28

i was just giving you a away to test your tps and...

i was just giving you a away to test your tps and see if it needed adjustment or if it was bad.
Forum: TPI
09-02-2002, 01:20 AM
Replies: 2
Views: 417
Posted By jizzyz28

not sure but.....

Like he already said read the code, but if it were me i would go ahead and replace the ignition module, b/c my car did that once and it winded up being that. give that a shot and good luck with it.
Forum: Theoretical and Street Racing
09-02-2002, 12:49 AM
Replies: 3
Views: 365
Posted By jizzyz28

well i figured i would just tell ya

I ran a 93 z28 tonight, i didn't want to but the guy just kept running his mouth so i figured what the hell. Well he didn't have anything but roller rockers, exhaust, and oh yeah don't forget the PVC...
Forum: Tech / General Engine
09-02-2002, 12:42 AM
Replies: 7
Views: 504
Posted By jizzyz28

try to find

try to find a hole already there if you cn't put it where you want to and deff use a rubber grommet
Forum: TPI
09-01-2002, 09:23 PM
Replies: 6
Views: 480
Posted By jizzyz28

rev the motor and see how long it takes to fall...

rev the motor and see how long it takes to fall down and test another car if it falls too slowly then your tps is bad
Forum: TPI
09-01-2002, 09:21 PM
Replies: 15
Views: 783
Posted By jizzyz28

hmm

have you tried a colder plug yet, is your car running rich/lean look into and try different plugs such as colder or hotter
Forum: TPI
09-01-2002, 09:17 PM
Replies: 9
Views: 817
Posted By jizzyz28

not much hell there are 8 22 lbs injectors if a...

not much hell there are 8 22 lbs injectors if a prob get some of a lt1 25 lbs
Forum: Tech / General Engine
09-01-2002, 09:03 PM
Replies: 7
Views: 504
Posted By jizzyz28

one way is to (after you hook the tach wire to...

one way is to (after you hook the tach wire to the distributer) go ahead and use the wires going to your existing tach. and there is a light under and behind the center ac vents hook the light wires...
Forum: Tech / General Engine
09-01-2002, 08:59 PM
Replies: 2
Views: 380
Posted By jizzyz28

well if you are looking into slp

slp makes a pretty nice cam to match up with vortec heads give the parts department a ring and talk to them
Forum: Tech / General Engine
08-22-2002, 05:50 PM
Replies: 22
Views: 1,203
Posted By jizzyz28

HEY BUD GUESS WHAT

THAT SOUNDS LIKE THE RESTRICTER PLATE (GOVENER). MY CAR DID THE SAME THING UNTIL I HOOKED IT UP TO A COMPUTER AND SET IT HIGHER. IF YOUR CAR IS REALLY GOING INTO DRIVE HOW CAN YOU TELL AND HAVE THE...
Forum: Auto Detailing and Appearance
08-21-2002, 01:07 AM
Replies: 41
Views: 1,040
Posted By jizzyz28

HERE IS WHAT I WOULD DO

YOU NEED TO PAINT THE HEADLIGHT BEZELS THE COLOR OF THE CAR. THEN POLISH OR GET THE TORQUE THRUSTS THEY LOOK GOOD ON THESE CARS. TINT THE WINDOWS, IF YOU WOULD LIKE DROP IT AN INCH AND A HALF BUT NO...
Forum: Tech / General Engine
08-21-2002, 12:59 AM
Replies: 6
Views: 482
Posted By jizzyz28

I WORK AT ADVANCE AUTO

MAN THERE LIKE $20 TO $25, GET ONE FOR AN 88 IROC B/C THEY ARE ADJUSTABLE AND IF YOU MESS WITH A PRE SET ONE YOU SCREW IT UP. IT SHOULD BE SET FROM .35 TO .95 VOLTS. IF YOU HAVE A COMP IT IS EASY BUT...
Forum: Suspension and Chassis
08-21-2002, 12:55 AM
Replies: 7
Views: 491
Posted By jizzyz28

CHECK OUT THE ROTORS THEY MIGHT NEED TO BE...

CHECK OUT THE ROTORS THEY MIGHT NEED TO BE REPLACED OR CUT. CHECK YOUR SWAY BAR AND THE TIE ROD ENDS. THE HOSES AND CALIPER PROBLEMS SOUND GOOD ALSO, BUT WHILE YOUR DOWN THERE CHECK ALL OF YOUR...
Forum: Tech / General Engine
08-21-2002, 12:52 AM
Replies: 6
Views: 12,611
Posted By jizzyz28

FLYWHEEL = MANUAL TRANNY FLEXPLATE = AUTOMATIC...

FLYWHEEL = MANUAL TRANNY
FLEXPLATE = AUTOMATIC TRANNY
Forum: Suspension and Chassis
08-21-2002, 12:49 AM
Replies: 6
Views: 14,154
Posted By jizzyz28

guess what

loose steering is not always caused by ball joints check your tie rod ends inner and outer that mess with steering bad, oh yeah i wouldn't go to that robbery of shop anymore
Forum: TPI
08-21-2002, 12:40 AM
Replies: 6
Views: 608
Posted By jizzyz28

look at your displacement

You won't be able to make 305 heads work to your advantage b/c the compression will be to high to get the power you are looking for. so if those edelbrock heads are for a 305 good luck working at the...
Forum: Tech / General Engine
08-14-2002, 01:37 AM
Replies: 16
Views: 515
Posted By jizzyz28

i had that problem once

well i think your ignition module is going bad, they act up when it is real cold but go bad when it gets hot, check the timing and the TPS voltage also.
Forum: Tech / General Engine
08-14-2002, 01:32 AM
Replies: 4
Views: 347
Posted By jizzyz28

here are some ideas

well why don;t you free up some power by removing the smog pump(instructions on the tech articles page), bypassing coolant flow from the throttle body(also inside), remove the emission control...
Forum: Tech / General Engine
08-14-2002, 01:26 AM
Replies: 9
Views: 341
Posted By jizzyz28

i hate to disagree but i don't think that is your...

i hate to disagree but i don't think that is your coil, b/c the coil sits a little closer to the cap. i think it might be to you a/c but i could be wrong b/c it might be the coil but the picture is...
Forum: TPI
08-14-2002, 01:20 AM
Replies: 3
Views: 361
Posted By jizzyz28

check all of the ignition parts: distributer;...

check all of the ignition parts: distributer; coil; rotor button; cap; ignition module; wires;
Forum: TPI
08-14-2002, 01:15 AM
Replies: 36
Views: 1,534
Posted By jizzyz28

if it were me

they sell stroker kits now, look into that it comes with the crank already turned down, connecting rods ready to put on, and oh yeah you don't have to have a new flywheel, but i would get one just...
Forum: Exhaust
08-14-2002, 01:11 AM
Replies: 10
Views: 652
Posted By jizzyz28

well its a trick

well now this is a great thing alot of people disagree with me but they make stuff you pour into your oil. This is a 2 for 1 deal this stuff increases oil pressure and will help you pass your...
Showing results 1 to 47 of 47


 
Forum Jump


All times are GMT -5. The time now is 01:50 AM.