Third Generation F-Body Message Boards

 
Page 1 of 2
1
2
Search: Posts Made By: Blue91'
Showing results 1 to 50 of 68
Search took 0.17 seconds.
Forum: Tech / General Engine
01-31-2004, 09:27 PM
Replies: 1
Views: 395
Posted By Blue91'

No start prob. Im stumped

The car is a 95 Olds with a 3.8 V6. Ive got spark, fuel to the cylinders,compression and no codes. Ive checked all the obvious things , at least anything I can think of. Ive done a search on it...
Forum: Auto Detailing and Appearance
07-03-2002, 11:50 AM
Replies: 7
Views: 510
Posted By Blue91'

wheels

I have a perfect set Roh 15X7 Snypers with pirelli tires on them that are taking up space in my garage if you interested in a 15 inch aftermarket wheel for cheap.The tires have about 90 percent tread...
Forum: Electronics
06-06-2002, 02:18 PM
Replies: 17
Views: 1,325
Posted By Blue91'

Im telling you , you have the correct speed...

Im telling you , you have the correct speed sensor..... You have your speedometer wire going to the 2000 pulse per mile out put. that output is for the cruise, leave the cruise wire there.... that is...
Forum: Electronics
06-05-2002, 03:44 PM
Replies: 17
Views: 1,325
Posted By Blue91'

7730 ecm = speedo(green) wire needs to goto pin-...

7730 ecm = speedo(green) wire needs to goto pin- BB 11 on the ecm . If you have cruise (red) it goes to pin- BC 1 on the ecm. VSS purple goes to vss low pin- BB-9 Yellow goes to VSS high pin- BB...
Forum: Electronics
06-05-2002, 03:35 PM
Replies: 17
Views: 1,325
Posted By Blue91'

Yes , you are going to eliminate your old speed...

Yes , you are going to eliminate your old speed buffer because the tpi ecm has the buffer built into it. Your on the right track.Once your vss is wired into the vss high and low inputs on the ecm,...
Forum: Electronics
06-04-2002, 05:41 PM
Replies: 17
Views: 1,325
Posted By Blue91'

Just to add a little note, The vss generates an...

Just to add a little note, The vss generates an AC signal from what I understand.Its the speed buffers job to make the signal useable for the speedometer and cruise control.The whole pulse thing is...
Forum: Electronics
06-04-2002, 04:10 PM
Replies: 17
Views: 1,325
Posted By Blue91'

VSS

The Vss Buffer is just to the left of the ecm under the dash, its a small square type thin electrical component you cant miss it. There are 2 screws that hold it in that are on the bottom of the dash...
Forum: Electronics
06-03-2002, 04:16 PM
Replies: 17
Views: 1,325
Posted By Blue91'

When I changed from an auto to T-5 , the t-5 came...

When I changed from an auto to T-5 , the t-5 came from a 92TPI GTA Firebird with a 3.08 rear. My car is an RS. After researching, pulling out hair screaming and kicking trying to find the part number...
Forum: Electronics
06-03-2002, 02:28 PM
Replies: 17
Views: 1,325
Posted By Blue91'

The VSS part # is 10456087, electronic speedo for...

The VSS part # is 10456087, electronic speedo for T-5 with 3.08 gear. Not sure what rpo code it is but that part number is the one you need.
Forum: Electronics
05-31-2002, 09:59 AM
Replies: 5
Views: 601
Posted By Blue91'

Did that cure the problem?

Did that cure the problem?
Forum: Electronics
05-30-2002, 01:38 PM
Replies: 4
Views: 1,272
Posted By Blue91'

VSS Buffer wiring

first 2 terminals by them selves: A and B for the VSS(yellow /black) the other group of terminals : A-ground, C- speedo(green), E-cruise (if equiped) (red) ,F- to the ECM(brown) and H-to ignition....
Forum: Electronics
05-23-2002, 06:05 PM
Replies: 1
Views: 531
Posted By Blue91'

Never mind, I found it.

Never mind, I found it.
Forum: Electronics
05-23-2002, 11:33 AM
Replies: 1
Views: 531
Posted By Blue91'

Repinning TBI harness

Has anyone repinned their TBI harness to work with Speed density TPI. I dont mean tearing it out and sending it out to be done, I would like to do this myself but I need a little more info.I already...
Forum: Transmissions and Drivetrain
05-19-2002, 08:16 PM
Replies: 18
Views: 727
Posted By Blue91'

That Part # Is for electronic VSS used for TBI...

That Part # Is for electronic VSS used for TBI and TPI cars w/manual and 3.08 gear with electronic VSS 90-92. I assumed you were going to need that one.My fault. Just trying to help you out.
Forum: Transmissions and Drivetrain
05-19-2002, 06:52 PM
Replies: 18
Views: 727
Posted By Blue91'

VSS

A T-5 never came in a car with 2.73, the lowest ratio it was matched with was 3.08 in a V8 car , not sure about V6 cars but they are usually higher ratios anyway.I did the swap in my 91 RS V8 and the...
Forum: Aftermarket Vendor Review
05-14-2002, 12:05 PM
Replies: 7
Views: 776
Posted By Blue91'

Year One

Thats funny, I ordered the lower shift boot for my camaro and they sent me the upper also and diddnt tell me the rubber lower was unavailable. I also ordered the upper shift plate w/ ashtray and it...
Forum: Aftermarket Vendor Review
05-14-2002, 10:49 AM
Replies: 8
Views: 748
Posted By Blue91'

Iroc rims

Ive been looking for a set for my Camaro, I would be definately be interested in a good set. Do you have a pic and price you could send me also?
Forum: Transmissions and Drivetrain
03-06-2002, 04:59 PM
Replies: 3
Views: 362
Posted By Blue91'

I just did the swap a few months ago, Its not...

I just did the swap a few months ago, Its not that hard to do. I did the whole job in a few hours over a weekend . Once you read the tech article and get familiar with what has to be done and what...
Forum: South East Region
02-12-2002, 07:20 PM
Replies: 22
Views: 730
Posted By Blue91'

Im from Kernersville, just outside of Winston...

Im from Kernersville, just outside of Winston Salem
Forum: TPI
11-12-2001, 05:10 PM
Replies: 9
Views: 465
Posted By Blue91'

Thanks for all the replys everyone, I really...

Thanks for all the replys everyone, I really appreciate it. I am going to put the stove pipe on to pass for now, till I swap to TPI this spring.I never heard of what transmission you have being of...
Forum: TPI
11-09-2001, 04:40 PM
Replies: 9
Views: 465
Posted By Blue91'

Im hoping they wont give me a hard time, its a...

Im hoping they wont give me a hard time, its a better system anyway.I emailed the state DMV 2 days ago to see if they had any info on it but I havent recieved anything back from them yet. I know they...
Forum: TPI
11-08-2001, 04:37 PM
Replies: 9
Views: 465
Posted By Blue91'

Thats what im hoping they will say,but its...

Thats what im hoping they will say,but its getting to be a real drag to mess around with your car these days. It seems like when you do a modification to your car these days you got worry about what...
Forum: TPI
11-06-2001, 09:43 PM
Replies: 9
Views: 465
Posted By Blue91'

I know they can fail me for the stove pipe, I...

I know they can fail me for the stove pipe, I just cant believe this guy bothered and he was rude about it which was uncalled for.I have never had a problem with emmissions or inspections for years...
Forum: TPI
11-06-2001, 08:04 PM
Replies: 9
Views: 465
Posted By Blue91'

Question for people who do inspections or who have info on this topic

I just took my Camaro in today to get it inspected, they wouldnt inspect the car because it diddnt have the heat stove pipe(its a TBI Car right now)on it going to the aircleaner!!!!!I NEVER HAD A...
Forum: Transmissions and Drivetrain
10-11-2001, 07:22 PM
Replies: 9
Views: 783
Posted By Blue91'

I just finished doing a auto to T-5 swap last...

I just finished doing a auto to T-5 swap last weekend, it was a snap.There is no spring used with the hyd. clutch set up. I diddnt have to change the starter.I had no problems mounting the starter...
Forum: TBI
10-09-2001, 09:35 PM
Replies: 4
Views: 434
Posted By Blue91'

Thanks rich, thats the info I needed.I appreciate...

Thanks rich, thats the info I needed.I appreciate it, you wouldnt be able to tell me what color the speedo gears are by any chance? The ones I supposedly have are from a 308 rear geared car as well.I...
Forum: TBI
10-08-2001, 08:57 PM
Replies: 4
Views: 434
Posted By Blue91'

I just need the part number thats stamped on the...

I just need the part number thats stamped on the vehicle speed sensor from anyone with a T B I 5-speed car.
Forum: Transmissions and Drivetrain
10-08-2001, 07:27 PM
Replies: 4
Views: 670
Posted By Blue91'

BTT

BTT
Forum: Transmissions and Drivetrain
10-08-2001, 04:59 PM
Replies: 4
Views: 670
Posted By Blue91'

I appreciate the reply but I think you got the...

I appreciate the reply but I think you got the wrong idea, Im not concerned with the speedometer being off , Im getting a VSS code 24. Someone told me that there are 2 types of speed sensors, a TPI...
Forum: History / Originality
10-08-2001, 04:41 PM
Replies: 9
Views: 559
Posted By Blue91'

I really appreciate the replys!! This is a...

I really appreciate the replys!! This is a F**king nightmare to find this sensor!!! 3 different dealerships and 4 auto parts stores and no one has a description of what which sensor/p# goes to...
Forum: Electronics
10-08-2001, 04:20 PM
Replies: 30
Views: 1,089
Posted By Blue91'

Im just outside of Greensboro.Your Car wouldnt...

Im just outside of Greensboro.Your Car wouldnt happen to be a V8 5-speed would it?
Forum: Electronics
10-07-2001, 09:06 PM
Replies: 30
Views: 1,089
Posted By Blue91'

Im glad I was of some help to you. The leaves are...

Im glad I was of some help to you. The leaves are starting to change now.I dont know of many Camaro/Firebird clubs in this area, most of them are for the older first generation Camaro/Firebird , our...
Forum: History / Originality
10-07-2001, 07:25 PM
Replies: 9
Views: 559
Posted By Blue91'

D8E Is for an automatic, I need the V8 TBI...

D8E Is for an automatic, I need the V8 TBI 5-speed code or part number for the 5- speed
Forum: Electronics
10-07-2001, 06:09 PM
Replies: 1
Views: 937
Posted By Blue91'

Anyone got a clue?? Anyone with a factory 5-speed...

Anyone got a clue?? Anyone with a factory 5-speed V8 TBI car out there? All I need is someone to get the part number off the Speed sensor at the rear of the tranny . Please help , car runs like crap....
Forum: Electronics
10-07-2001, 06:04 PM
Replies: 30
Views: 1,089
Posted By Blue91'

I had the same Problem and got sick of it also,...

I had the same Problem and got sick of it also, What I did was buy a 194 socket and bulb (standard marker light bulb and socket) and removed the original and wired in the 194 bulb and socket.It works...
Forum: Transmissions and Drivetrain
10-07-2001, 02:36 PM
Replies: 4
Views: 670
Posted By Blue91'

Does anyone have a clue,part number or RPO...

Does anyone have a clue,part number or RPO number!!!Any insight would be great. I know a bunch of us have done this swap, someones got to have a part number for a vehicle speed sensor for a 5-speed...
Forum: TBI
10-07-2001, 11:36 AM
Replies: 4
Views: 434
Posted By Blue91'

Need a part# off an 89-92TBI 5-Speed car

Someone please help man, I need the part number or RPO code for the vehicle speed sensor in a factory TBI 5-Speed Cam/Bird 89-92. I swapped in a 5-speed and I cant find any info on getting the...
Forum: History / Originality
10-07-2001, 08:28 AM
Replies: 9
Views: 559
Posted By Blue91'

Anyone???? It should be a 3 Character code...

Anyone???? It should be a 3 Character code starting with D8?
Forum: History / Originality
10-05-2001, 11:12 PM
Replies: 9
Views: 559
Posted By Blue91'

VSS RPO Code

Does anyone know the correct VSS RPO code for a 305 TBI / 5-speed Camaro RS 90-92 ? Ive been trying to find out with no luck, even the dealership couldnt tell me and they list a few of them. My car...
Forum: Electronics
10-05-2001, 07:28 PM
Replies: 1
Views: 937
Posted By Blue91'

VSS Dilema

I just finished a t-5 trans swap and I need to get the correct speed sensor for the car. The car is 91 RS with the elec.speedo. I went to the dealership to get the sensor and they list 2 for a...
Forum: Transmissions and Drivetrain
10-05-2001, 04:34 PM
Replies: 4
Views: 670
Posted By Blue91'

Which VSS is the right one?

I just finished swapping in a 5-speed in my car and I need the correct VSS for the car. The car is a 91' with TBI, the trans has a VSS for a TPI car in it now, so I went to the dealership to try to...
Forum: Transmissions and Drivetrain
07-07-2001, 06:37 PM
Replies: 5
Views: 1,419
Posted By Blue91'

ede, What kind of trouble did you have with the...

ede, What kind of trouble did you have with the 10 bolts? Ive set my backlash at .008 my gear mesh pattern is centered.They are GM gears.Carrier bearings are preloaded at about .004 on each side. I...
Forum: Transmissions and Drivetrain
07-06-2001, 09:40 PM
Replies: 5
Views: 1,419
Posted By Blue91'

Ok thats what I was looking for, I figured the...

Ok thats what I was looking for, I figured the preload adjustment would be similar to setting preload on a wheel bearing(slight drag after the free play is eliminated).As for holding the yoke I just...
Forum: Transmissions and Drivetrain
07-06-2001, 08:19 PM
Replies: 5
Views: 1,419
Posted By Blue91'

Pinion bearing preload question

Is there a safe way to set the pinion bearing preload safely without an inch pound tourque wrench? I cant seem to find a dial type inch pound wrench anywhere.If not where can I get a dial type one...
Forum: Transmissions and Drivetrain
07-02-2001, 06:15 PM
Replies: 1
Views: 1,228
Posted By Blue91'

The number on mine is: 10241153 Its a brand new...

The number on mine is: 10241153 Its a brand new piece with the GM part# sticker still on it so the number is recent. Hope this helps.
Forum: Transmissions and Drivetrain
05-31-2001, 08:10 PM
Replies: 3
Views: 515
Posted By Blue91'

Thanks, I figured the 12 41 had some signifigance...

Thanks, I figured the 12 41 had some signifigance but I didnt realize they were the tooth count on the ring and pinion.Well it looks like they are 3:42.You learn something everyday. Thanks for the...
Forum: Transmissions and Drivetrain
05-31-2001, 05:56 PM
Replies: 3
Views: 515
Posted By Blue91'

Bought a used set of 3:42 , is there a quick way to confirm the ratio

I just got a used set of 3:42 rear gears and I just wanted to make sure they are actually 3:42 before I install them. They are GM gears and the only identification numbers on them are ( 12:41 GM 7...
Forum: Tech / General Engine
05-12-2001, 01:05 PM
Replies: 4
Views: 389
Posted By Blue91'

I would first change all the oil in the system as...

I would first change all the oil in the system as refrigeration oil is extremely prone to absorb moisture before putting the system back together mainly because you left it open for so long.If you...
Forum: Tech / General Engine
05-09-2001, 05:49 PM
Replies: 6
Views: 343
Posted By Blue91'

Is your fan working?The stock temp sensor is...

Is your fan working?The stock temp sensor is designed to kick the fans in up in the 195-210 range so it wont make a difference how cool of a stat you have because the fans will still come on at the...
Forum: Tech / General Engine
05-01-2001, 06:01 PM
Replies: 11
Views: 720
Posted By Blue91'

Clean out the front of your radiator, you wouldnt...

Clean out the front of your radiator, you wouldnt believe what will find its way in there. I had the same exact problems for a few months, I changed all kinds of stuff including the radiator and...
Showing results 1 to 50 of 68
 
Page 1 of 2
1
2


 
Forum Jump


All times are GMT -5. The time now is 08:25 AM.