Need a Wire Harness.
#1
Junior Member
Thread Starter
Join Date: Apr 2006
Location: San Antonio Texas
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 Z28, 89 RS, 98 SS
Engine: 350 .060 over, 350 .040 over, LS1
Transmission: TH350, TH700r4, T56
Axle/Gears: 4.11 spool, 3.73 open, 3.42 posi
Need a Wire Harness.
I am trying to complete my tpi swap and need to find the under hood harness for lights, ac, wipers, ect. I spent sunday after noon looking through a local slvage yard and everyone that I found had been hacked. I am using an 87 harness but think that it should be the same through 89. The tbi under hood harness may also work. Let me know what you have.
thanks thomas
thanks thomas
#2
Member
iTrader: (2)
Join Date: Jan 2005
Location: Texas
Posts: 475
Received 0 Likes
on
0 Posts
Car: 1991 RS Camaro Convertible
Engine: 305
Transmission: 700R4
Re: Need a Wire Harness.
I used the TBI harness and repinned it to work with the TPI setup I have. Had to extended some of the sensor wires and splice in extra injector wires and it works really well. Do a search on the board for repinning TBI harness.
Alex
Alex
#3
Junior Member
Thread Starter
Join Date: Apr 2006
Location: San Antonio Texas
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 Z28, 89 RS, 98 SS
Engine: 350 .060 over, 350 .040 over, LS1
Transmission: TH350, TH700r4, T56
Axle/Gears: 4.11 spool, 3.73 open, 3.42 posi
Re: Need a Wire Harness.
The engine harness was already replaced, but being that my car had a 2.8 the accessories were all part of the engine harness the only harness that I could find were for the ccqj setup the hand full of tbi cars I found the harness had been hacked to the point that I would be rebuilding the harness for the body connector. I cut the wiper harness out of the old harness to get it on the road.
Last edited by z28camaroracer; 03-18-2008 at 08:07 PM. Reason: sp
Thread
Thread Starter
Forum
Replies
Last Post