anyone around north al
#2
Member
Join Date: Dec 2004
Location: Harvest, AL
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro RS
Engine: 396 BBC
Transmission: Turbo 400
Axle/Gears: Moser 9 inch/4.56 gears
ckeene502,
You know where I am. I was thinking about the same thing.
The nearest Camaro club is the Decatur F-body association. Their website doesn't seem to be very active though. Looks like a lot of 4th geners.
I noticed the super Chevy Show is going to be at Huntsville Dragway Spring 2006.
Post info if you know of cruise or car show activity in the area.
Boo.
You know where I am. I was thinking about the same thing.
The nearest Camaro club is the Decatur F-body association. Their website doesn't seem to be very active though. Looks like a lot of 4th geners.
I noticed the super Chevy Show is going to be at Huntsville Dragway Spring 2006.
Post info if you know of cruise or car show activity in the area.
Boo.
#3
Member
Thread Starter
Join Date: Jan 2003
Location: Elkmont, AL
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
i will post things if/when i hear them
yup the decatur site does seem pretty dead
i just came back from the junkyard myself, found a manual steering box so i just had to get it.
keene
yup the decatur site does seem pretty dead
i just came back from the junkyard myself, found a manual steering box so i just had to get it.
keene
#5
Member
Thread Starter
Join Date: Jan 2003
Location: Elkmont, AL
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
i think i know your car...was the front end black for awhile there or hood . its been awhile since i have been.
anyone else wants to speak up from north al.
anyone else wants to speak up from north al.
#7
Member
Join Date: Dec 2004
Location: Harvest, AL
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro RS
Engine: 396 BBC
Transmission: Turbo 400
Axle/Gears: Moser 9 inch/4.56 gears
1bad406,
Nice video....outstanding ET. What was your MPH and 60ft time on that pass? Would've been nice to see another car in the other lane gettin' spanked! I love to see a 3rd gen go sub 7s in the 1/8th.....makes me want to get to work.
I kinda lost interest in the races since my car isn't running. I'll start getting back up there to get inspired.
ckeene502,
Looks like there's a few North Alabama 3rd geners are out there.
Boo.
Nice video....outstanding ET. What was your MPH and 60ft time on that pass? Would've been nice to see another car in the other lane gettin' spanked! I love to see a 3rd gen go sub 7s in the 1/8th.....makes me want to get to work.
I kinda lost interest in the races since my car isn't running. I'll start getting back up there to get inspired.
ckeene502,
Looks like there's a few North Alabama 3rd geners are out there.
Boo.
Trending Topics
#9
Supreme Member
Join Date: Jul 2005
Location: Arab, Alabama
Posts: 1,675
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1988 Trans Am GTA
Engine: 350 4BBL
Transmission: 700R4
Axle/Gears: 3.27
Originally posted by booboosean
...Looks like there's a few North Alabama 3rd geners are out there....Boo.
...Looks like there's a few North Alabama 3rd geners are out there....Boo.
A.W.
Last edited by Supervisor42; 11-27-2005 at 08:40 PM.
#10
Senior Member
iTrader: (1)
Join Date: Jun 2004
Location: North Ga.
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro
Engine: 406
Transmission: Powerglide
Axle/Gears: Moser 31 spline / 4.86
Originally posted by booboosean
1bad406,
Nice video....outstanding ET. What was your MPH and 60ft time on that pass? Would've been nice to see another car in the other lane gettin' spanked! I love to see a 3rd gen go sub 7s in the 1/8th.....makes me want to get to work.
I kinda lost interest in the races since my car isn't running. I'll start getting back up there to get inspired.
ckeene502,
Looks like there's a few North Alabama 3rd geners are out there.
Boo.
1bad406,
Nice video....outstanding ET. What was your MPH and 60ft time on that pass? Would've been nice to see another car in the other lane gettin' spanked! I love to see a 3rd gen go sub 7s in the 1/8th.....makes me want to get to work.
I kinda lost interest in the races since my car isn't running. I'll start getting back up there to get inspired.
ckeene502,
Looks like there's a few North Alabama 3rd geners are out there.
Boo.
Originally posted by 05TrackChamp
Congrats on your win and wally 406
Congrats on your win and wally 406
#11
Supreme Member
Join Date: Jul 2005
Location: Arab, Alabama
Posts: 1,675
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1988 Trans Am GTA
Engine: 350 4BBL
Transmission: 700R4
Axle/Gears: 3.27
Originally posted by 1bad406
I think it was a 1.47, you can see it on the scoreboard before i cross the line. MPH was 100.XX.
I think it was a 1.47, you can see it on the scoreboard before i cross the line. MPH was 100.XX.
#12
Senior Member
iTrader: (1)
Join Date: Jun 2004
Location: North Ga.
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro
Engine: 406
Transmission: Powerglide
Axle/Gears: Moser 31 spline / 4.86
Originally posted by Supervisor42
I can't tell if that bottom light on the tree is red or green. My eyes must be gettin' old....(wink, wink)
I can't tell if that bottom light on the tree is red or green. My eyes must be gettin' old....(wink, wink)
#13
Member
Thread Starter
Join Date: Jan 2003
Location: Elkmont, AL
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
i am happy to see there are a few people around here talking. maybe one day we can all meet up some where and shoot the bull. lets keep the posts going. its always good to have a few friends around.
keene
keene
#14
Member
Join Date: Dec 2004
Location: Harvest, AL
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro RS
Engine: 396 BBC
Transmission: Turbo 400
Axle/Gears: Moser 9 inch/4.56 gears
I'm glad to see it too. Kinda sucks it's turning winter right now. I was surprised at how many 3rd gen enthusiasts are out there that don't know how to turn on a computer.
Maybe sometime after the holidays when everyone is not so busy.
Boo.
Maybe sometime after the holidays when everyone is not so busy.
Boo.
#15
YEA ALABAMA
I'm from just south of Birmingham I'm dropping a 406 in my 88 formy now cant wait to get it done.Been wanting to get up there to the track just aint made it yet.Maybe this spring what distance is the track.
#16
Member
Thread Starter
Join Date: Jan 2003
Location: Elkmont, AL
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
welcome abord WIDOW!!!
this some what cold weather kinda sucks....keeps my lazy butt inside. i have a 91 i need to strip and take the body to the scrap yard. all i have left is the suspension though.
now lets see if we all can start doing some networking to help each other out.
keene
this some what cold weather kinda sucks....keeps my lazy butt inside. i have a 91 i need to strip and take the body to the scrap yard. all i have left is the suspension though.
now lets see if we all can start doing some networking to help each other out.
keene
#17
Member
Join Date: Dec 2004
Location: Harvest, AL
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro RS
Engine: 396 BBC
Transmission: Turbo 400
Axle/Gears: Moser 9 inch/4.56 gears
ckeene502,
Speaking of networking, that '91 wouldn't happen to have a decent set or armrests you would consider selling would it? My car has nice interior pieces but the armrests are coming apart.
Hey WIDOW, I second the welcome!!
We're all goin' to have to get together this spring.....I hate cold weather.
Speaking of networking, that '91 wouldn't happen to have a decent set or armrests you would consider selling would it? My car has nice interior pieces but the armrests are coming apart.
Hey WIDOW, I second the welcome!!
We're all goin' to have to get together this spring.....I hate cold weather.
#18
Member
Thread Starter
Join Date: Jan 2003
Location: Elkmont, AL
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
they are grey and black...two different colors. i have a set of greys out of my wifes camaro. they are in decent shape but are lifting on the top, i recken they could be reglued or stapled. you can have them since they not in "great shape". i do have to find them though. if yours are trashed these are great. i will take a pic when i find them(give me a day).
keene
keene
#21
Senior Member
iTrader: (1)
Join Date: Jun 2004
Location: North Ga.
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro
Engine: 406
Transmission: Powerglide
Axle/Gears: Moser 31 spline / 4.86
http://www.huntsvilledragway.com/ I'll be there for that big outlaw race... $50,000 to win 10.5 and $5,000 to win my class, 7.0
I'm working on painting my car now, So take a good look at the old look...
I'm working on painting my car now, So take a good look at the old look...
#22
Member
Join Date: Dec 2004
Location: Harvest, AL
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro RS
Engine: 396 BBC
Transmission: Turbo 400
Axle/Gears: Moser 9 inch/4.56 gears
1bad406,
Wish my paint looked as good as your "old look"!! I have that not-so-rare option for 1989 "peeling" factory paint job and am looking for someone to paint it. Who are you going to get to paint yours?
ckeene502,
My e-mail is booboosean@hotmail.com if you get a chance at the armrest photos.......no rush, I know everyone's busy this time of year.
Merry Christmas,
Boo
Wish my paint looked as good as your "old look"!! I have that not-so-rare option for 1989 "peeling" factory paint job and am looking for someone to paint it. Who are you going to get to paint yours?
ckeene502,
My e-mail is booboosean@hotmail.com if you get a chance at the armrest photos.......no rush, I know everyone's busy this time of year.
Merry Christmas,
Boo
#23
Senior Member
iTrader: (1)
Join Date: Jun 2004
Location: North Ga.
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro
Engine: 406
Transmission: Powerglide
Axle/Gears: Moser 31 spline / 4.86
Originally posted by booboosean
1bad406,
Wish my paint looked as good as your "old look"!! I have that not-so-rare option for 1989 "peeling" factory paint job and am looking for someone to paint it. Who are you going to get to paint yours?
1bad406,
Wish my paint looked as good as your "old look"!! I have that not-so-rare option for 1989 "peeling" factory paint job and am looking for someone to paint it. Who are you going to get to paint yours?
#24
Member
Join Date: Dec 2004
Location: Harvest, AL
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro RS
Engine: 396 BBC
Transmission: Turbo 400
Axle/Gears: Moser 9 inch/4.56 gears
That's cool doing it yourself......should turn out good....looks like a pretty straight body.
Can any of you guys in North Alabama recommend a good body shop that won't cost a fortune? I'm looking for a good base-clear and it doesn't have to be "show quality". I've found most body shops don't want to mess with a car unless there's an insurance claim they can make a bunch of money on.
Thanks,
Boo
Can any of you guys in North Alabama recommend a good body shop that won't cost a fortune? I'm looking for a good base-clear and it doesn't have to be "show quality". I've found most body shops don't want to mess with a car unless there's an insurance claim they can make a bunch of money on.
Thanks,
Boo
#25
Member
Thread Starter
Join Date: Jan 2003
Location: Elkmont, AL
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
anyone get something good for christmas?!?!?!?!
wife got me a SUMMIT card!!!
already maxed out!!!
keene
wife got me a SUMMIT card!!!
already maxed out!!!
keene
Last edited by ckeene502; 12-27-2005 at 12:13 AM.
#26
Senior Member
iTrader: (1)
Join Date: Jun 2004
Location: North Ga.
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro
Engine: 406
Transmission: Powerglide
Axle/Gears: Moser 31 spline / 4.86
I got some Wilwood rear disc brakes! along with a gallon of primer, come catalyst, clothes, and Bad *** 1/64 scale dragstrip..
#27
Junior Member
Join Date: Oct 2005
Location: Tishomingo, MS
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Car: '84 Trans Am
Engine: 350
Transmission: T-5
I am here in very Northeast Mississippi, about 30 miles west of muscle shoals. I am going to be using the winter to try and get some bugs worked out of my car. Maybe this spring we will head up to huntsville for a grudge night special!
#28
Member
Join Date: Dec 2004
Location: Harvest, AL
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro RS
Engine: 396 BBC
Transmission: Turbo 400
Axle/Gears: Moser 9 inch/4.56 gears
ckeene502, Summit card kicks. I got $300.00 to put toward a new hood. Think I'm going to order one from Champion Fiberglass Products out of Ohio. I've heard good things about them. Any of y'all used their stuff?
Boo
Boo
#29
Member
Thread Starter
Join Date: Jan 2003
Location: Elkmont, AL
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
i am back again!!!
my wife gave birth to my first born child; girl 7.2 lbs.
12/30/05 was when she was born.
i have been so busy with the new years and all....i still have to ship out a steering box to a guy on here i sold to.
booboosean i am going to check on those arm rests any day now!!!
i also bought a 96 caprice classic and have been messing with it a little.
i have seen the champion hoods at a world of wheels in chatanooga at the first of the year. they looked great and where finished in white.
my wife gave birth to my first born child; girl 7.2 lbs.
12/30/05 was when she was born.
i have been so busy with the new years and all....i still have to ship out a steering box to a guy on here i sold to.
booboosean i am going to check on those arm rests any day now!!!
i also bought a 96 caprice classic and have been messing with it a little.
i have seen the champion hoods at a world of wheels in chatanooga at the first of the year. they looked great and where finished in white.
Last edited by ckeene502; 01-05-2006 at 10:22 PM.
#30
Member
Join Date: Dec 2004
Location: Harvest, AL
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro RS
Engine: 396 BBC
Transmission: Turbo 400
Axle/Gears: Moser 9 inch/4.56 gears
Congratulations ckeene502!!!
Sounds like you've got your hands full, and believe me, that little girl will become your number one priority.........that's the way it should be. That's why my project is taking so long, but it's worth it. My boy is 3 now and he loves to hang out with me in the garage and work on the car.
It's great that a few people have jumped on this board from the North Alabama area. I hope we're all able to meet sometime this spring.
Later,
Boo.
Sounds like you've got your hands full, and believe me, that little girl will become your number one priority.........that's the way it should be. That's why my project is taking so long, but it's worth it. My boy is 3 now and he loves to hang out with me in the garage and work on the car.
It's great that a few people have jumped on this board from the North Alabama area. I hope we're all able to meet sometime this spring.
Later,
Boo.
#31
Supreme Member
Join Date: Jul 2005
Location: Arab, Alabama
Posts: 1,675
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1988 Trans Am GTA
Engine: 350 4BBL
Transmission: 700R4
Axle/Gears: 3.27
Hopefully this isn't straying off topic too far but there is now a chassis dynamometer (dyno) closer to us in the northern half of the state. (closest one has been in Trussville). This one is in Cullman. It is NOT a Mustang Dyno even though it is at a new place that just set up shop in November called "Alabama Mustang", and they do run mustangs on it. It's even on a trailer. I hope to have pictures with phone number on my personal webpage soon so it will show up in search engines. I'm not affiliated with these guys, but did have a good chat with the owner whose name was Chad I believe. He said: "We don't discriminate, we'll run anything on it" (meaning GM cars too). I can't wait, I wasn't fancying running mine down the I-65 gauntlet to Trussville with just turndowns on the L/T headers. I want to get a read on it before I build the exhaust.
#32
Hey Guys just back from Hurricane relief work for 1 1/2 months
Ive got a 4'' and 6'' cowl hood for sale hadnt tried the 6'' on the car yet but one will be fs soon
Thinking about spending the cash to race 7oh but seems that it could be a while before I get there
1bad406 how much does your car weigh,gear,tranny,HP and rear set up?
I cant decide if i want to strip and spend on my car Lucille or just buy something ready to run
Ive got stock serpintine a/c compressors,altenators, p/s pumps, 2sets stock 5 spokes with 16'' rubber if anyone needs it plus other stock junk call 256 232 7775 jeff
Ive got a 4'' and 6'' cowl hood for sale hadnt tried the 6'' on the car yet but one will be fs soon
Thinking about spending the cash to race 7oh but seems that it could be a while before I get there
1bad406 how much does your car weigh,gear,tranny,HP and rear set up?
I cant decide if i want to strip and spend on my car Lucille or just buy something ready to run
Ive got stock serpintine a/c compressors,altenators, p/s pumps, 2sets stock 5 spokes with 16'' rubber if anyone needs it plus other stock junk call 256 232 7775 jeff
#33
Senior Member
iTrader: (1)
Join Date: Jun 2004
Location: North Ga.
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro
Engine: 406
Transmission: Powerglide
Axle/Gears: Moser 31 spline / 4.86
Originally posted by 05TrackChamp
1bad406 how much does your car weigh,gear,tranny,HP and rear set up?
1bad406 how much does your car weigh,gear,tranny,HP and rear set up?
#34
Junior Member
Join Date: Apr 2005
Location: Alabama, USA
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Trans-Am
Engine: 350 TPI (SLP mods from factory)
Transmission: 700 R4 (built with 2500 stall)
Axle/Gears: 3.23 Disc Posi
I just now ran across this post myself. I am in Tuscaloosa, and know a few other people here as well....with thirdgens. Trying to get a regional started here in T'town. I may come to Huntsville this summer to race, especially once I get my engine done. Right now I just picked it up from being painted....last week. My dad lives on Lake Guntersville, I mean the lake is in his backyard, so visit him during the summer as well.
#35
Thanks for the Info 406 I would like to run 7oh but need alot more motor than i have now
Still not sure if I want to make a race only car w/mine or try to find a good lightweight 7oh car complete or rolling
If anyone reads this and knows a good 7oh car f/s pls post up
That dyno looks cool maybe he could bring it to Hunts at midnight madness or TnT
Still not sure if I want to make a race only car w/mine or try to find a good lightweight 7oh car complete or rolling
If anyone reads this and knows a good 7oh car f/s pls post up
That dyno looks cool maybe he could bring it to Hunts at midnight madness or TnT
Thread
Thread Starter
Forum
Replies
Last Post
1nastygta
Engine/Drivetrain/Suspension Parts for Sale
0
09-24-2015 08:58 AM
blackandblue02
Camaros for Sale
0
09-10-2015 08:19 PM
Pilotrick50
Interior Parts for Sale
1
09-02-2015 12:48 PM