I NEED A RECO FOR A GOOD ENG SHOP IN PHOENIX
04-17-2011, 12:03 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2009
Location: PHOENIX/ TOLLESON ARIZONA
Posts: 598
Likes: 0
Received 2 Likes
on
1 Post
Car: 90 IROC 5.7 1LE CLONE 89 GTA 88IROC
Engine: 5.7TPI / 5.7TPI/ 5.7TPI/ 4.3 CMFI
Transmission: 700R4 UPGRADED 700R4STOCK700R4STOCK
Axle/Gears: 3.23 10 BOLT 3.27 9 BOLT 2.77 9BOLT
I NEED A RECO FOR A GOOD ENG SHOP IN PHOENIX
LOOKING FOR A DECENT ENG SHOP IN PHOENIX. I NEED HEADS / CRANK / BLOCK TURNED / HONED ETC... ANYBODY HAVE A GOOD EXPERIENCE WITH ANY ??
04-24-2011, 04:31 PM
#2
Senior Member
Thread Starter
Join Date: Sep 2009
Location: PHOENIX/ TOLLESON ARIZONA
Posts: 598
Likes: 0
Received 2 Likes
on
1 Post
Car: 90 IROC 5.7 1LE CLONE 89 GTA 88IROC
Engine: 5.7TPI / 5.7TPI/ 5.7TPI/ 4.3 CMFI
Transmission: 700R4 UPGRADED 700R4STOCK700R4STOCK
Axle/Gears: 3.23 10 BOLT 3.27 9 BOLT 2.77 9BOLT
Re: I NEED A RECO FOR A GOOD ENG SHOP IN PHOENIX
BUMP.
04-27-2011, 09:05 PM
#4
Senior Member
Thread Starter
Join Date: Sep 2009
Location: PHOENIX/ TOLLESON ARIZONA
Posts: 598
Likes: 0
Received 2 Likes
on
1 Post
Car: 90 IROC 5.7 1LE CLONE 89 GTA 88IROC
Engine: 5.7TPI / 5.7TPI/ 5.7TPI/ 4.3 CMFI
Transmission: 700R4 UPGRADED 700R4STOCK700R4STOCK
Axle/Gears: 3.23 10 BOLT 3.27 9 BOLT 2.77 9BOLT
Re: I NEED A RECO FOR A GOOD ENG SHOP IN PHOENIX
WHAT DID YOU GET DONE ??
04-28-2011, 01:57 AM
#5
Senior Member
Join Date: Feb 2004
Location: Phoenix, AZ
Posts: 510
Likes: 0
Received 1 Like
on
1 Post
Car: 85 87 87 91 92
Engine: 305 TPI 350 TPI 350 Carb
Transmission: B/W T-5 and 700R4
Re: I NEED A RECO FOR A GOOD ENG SHOP IN PHOENIX
Do Kelly's has done a few engines for me.... does great work..... he's on hatcher and like 14th ave or so
04-28-2011, 02:00 AM
#6
Senior Member
Thread Starter
Join Date: Sep 2009
Location: PHOENIX/ TOLLESON ARIZONA
Posts: 598
Likes: 0
Received 2 Likes
on
1 Post
Car: 90 IROC 5.7 1LE CLONE 89 GTA 88IROC
Engine: 5.7TPI / 5.7TPI/ 5.7TPI/ 4.3 CMFI
Transmission: 700R4 UPGRADED 700R4STOCK700R4STOCK
Axle/Gears: 3.23 10 BOLT 3.27 9 BOLT 2.77 9BOLT
Re: I NEED A RECO FOR A GOOD ENG SHOP IN PHOENIX
THATS NOT TOO FAR FROM MY PLACE.
04-28-2011, 05:01 PM
#7
Member
iTrader: (1)
Join Date: Jul 2006
Location: Phoenix
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Pontiac trans-am
Engine: building a 400
Transmission: 700r4
Re: I NEED A RECO FOR A GOOD ENG SHOP IN PHOENIX
They balanced my crankshaft a while ago. Recently I took a piar of used heads to them to look over before I install them and they fixed them up pretty good. They aren't the least expensive shop around but I think they do a good job and would use them agian.
Trending Topics
04-28-2011, 07:49 PM
#8
Member
iTrader: (1)
Join Date: Jul 2009
Location: PHX
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91' RS
Engine: 310 C.I.D. + n2o
Transmission: T-5
Axle/Gears: built 10 bolt 3.73's
Re: I NEED A RECO FOR A GOOD ENG SHOP IN PHOENIX
I've been using Standard Machine over in Glendale i've had them do a couple things and they always take care of me even tho the things i had done were small
04-28-2011, 08:25 PM
#9
Member
iTrader: (1)
Join Date: Aug 2007
Location: Litchfield Park
Posts: 341
Likes: 0
Received 1 Like
on
1 Post
Car: '91 1LE
Engine: 377 w/Stealthram
Transmission: T56
Axle/Gears: 3.42 Torsen
Re: I NEED A RECO FOR A GOOD ENG SHOP IN PHOENIX
I've heard good things about Standard Machine but haven't used them myself. I can tell you to NOT go to Basko. Has personally seen too many fubar'd engines come out of there with rookie mistakes. Whichever shop does the work, make sure you check it upon assembly with at least plastigauge if not micrometers and bore gauges.
05-06-2011, 05:28 PM
#10
Senior Member
Thread Starter
Join Date: Sep 2009
Location: PHOENIX/ TOLLESON ARIZONA
Posts: 598
Likes: 0
Received 2 Likes
on
1 Post
Car: 90 IROC 5.7 1LE CLONE 89 GTA 88IROC
Engine: 5.7TPI / 5.7TPI/ 5.7TPI/ 4.3 CMFI
Transmission: 700R4 UPGRADED 700R4STOCK700R4STOCK
Axle/Gears: 3.23 10 BOLT 3.27 9 BOLT 2.77 9BOLT
Re: I NEED A RECO FOR A GOOD ENG SHOP IN PHOENIX
I TAKE EM MY RAW HEADS AND BLOCK GET EM MAGNA FLUXED AND MIC'D / MACHINED / ALIGN HONED ETC... AND THEN ASSEMBLE THEM MYSELF. ITS THE ONLY WAY TO INSURE MY STUFF IS PUT 2GETHER RITE AND I GET MY ACTUAL PARTS BAK. I ENGRAVE THEM ALL WITH MY MARK.
05-07-2011, 09:49 AM
#11
Junior Member
Join Date: Sep 2009
Location: north phx
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro z28
Engine: 350
Transmission: turbo 400
Axle/Gears: 9/bolt
Re: I NEED A RECO FOR A GOOD ENG SHOP IN PHOENIX
i work right next to kellys, but have never used them?
i have a buddy, that has his own machine shop out of his house. he can do whatever you want and to your specs. he does alot of engine work for the guys in azfastest street cars and azgrudgeracing. good guy and good work.
tell me what you need done and i can get you some prices?
i have a buddy, that has his own machine shop out of his house. he can do whatever you want and to your specs. he does alot of engine work for the guys in azfastest street cars and azgrudgeracing. good guy and good work.
tell me what you need done and i can get you some prices?
05-07-2011, 12:23 PM
#12
Senior Member
Thread Starter
Join Date: Sep 2009
Location: PHOENIX/ TOLLESON ARIZONA
Posts: 598
Likes: 0
Received 2 Likes
on
1 Post
Car: 90 IROC 5.7 1LE CLONE 89 GTA 88IROC
Engine: 5.7TPI / 5.7TPI/ 5.7TPI/ 4.3 CMFI
Transmission: 700R4 UPGRADED 700R4STOCK700R4STOCK
Axle/Gears: 3.23 10 BOLT 3.27 9 BOLT 2.77 9BOLT
Re: I NEED A RECO FOR A GOOD ENG SHOP IN PHOENIX
i work right next to kellys, but have never used them?
i have a buddy, that has his own machine shop out of his house. he can do whatever you want and to your specs. he does alot of engine work for the guys in azfastest street cars and azgrudgeracing. good guy and good work.
tell me what you need done and i can get you some prices?
i have a buddy, that has his own machine shop out of his house. he can do whatever you want and to your specs. he does alot of engine work for the guys in azfastest street cars and azgrudgeracing. good guy and good work.
tell me what you need done and i can get you some prices?
05-28-2011, 01:56 AM
#14
Senior Member
Thread Starter
Join Date: Sep 2009
Location: PHOENIX/ TOLLESON ARIZONA
Posts: 598
Likes: 0
Received 2 Likes
on
1 Post
Car: 90 IROC 5.7 1LE CLONE 89 GTA 88IROC
Engine: 5.7TPI / 5.7TPI/ 5.7TPI/ 4.3 CMFI
Transmission: 700R4 UPGRADED 700R4STOCK700R4STOCK
Axle/Gears: 3.23 10 BOLT 3.27 9 BOLT 2.77 9BOLT
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
sailtexas186548
Engine/Drivetrain/Suspension Parts for Sale
8
01-19-2016 12:21 PM
nhra-trans-am
Southern California Area
14
09-17-2015 10:16 PM