Smog and 1 3/4 Vortec- headers New leak
#1
Guest
Posts: n/a
Smog and 1 3/4 Vortec- headers New leak
I have Don's 1 3/4 hi rise headers jet coated with his Y into a dual 3" mandrel cat back with a cross flow master. I recently have both sides of the headers leaking and my tube to the dual cats are leaking. With Don's headers on the passenger side front tube 2nd bolt back is real tight and it is a shorter 12 point, and I don't have any tool that will tighten it. So Im having a good friend bring some tools. I hope the gaskets are ok, I had the best put in. Also with leaks like this you can fail smog. I didnt pass smog the last time I had the car on the road, then everything was sealed. How ever if any one knows that ball under the front fender well that round plastic ball that a hose goes there. What that is and does it have anything to do with smog. I found it with the hose off. So I ordered a set of Arp's that Don suggest on the thread arp header bolts. I also have all the bracing that goes to the front header so Im surprised that the pass side had a leak on that front tube.
#2
Supreme Member
Join Date: Feb 2004
Location: So Cal
Posts: 1,581
Likes: 0
Received 2 Likes
on
2 Posts
Car: 89 IROC Z28
Engine: 357 TPI
Transmission: 700R4
Axle/Gears: 3.42 Posi
Re: Smog and 1 3/4 Vortec- headers New leak
The Ball your referring to is a vacuum reservoir, at least that's what I've been told.
#4
Guest
Posts: n/a
Re: Smog and 1 3/4 Vortec- headers New leak
No that's the thing. I was running rich at the time but not rich all the time. Im going to have to track where this all goes, it probably goes to the map bar also. My Co levels is what I didnt pass, I think it's unburned fuel.
#5
Guest
Posts: n/a
Re: Smog and 1 3/4 Vortec- headers New leak
That hose Tee's off from the cruise control and tee's off near the plenum. So im still unsure what it all does. Tonight I got new header bolts in and everything sealed up there. The map has it's own hose that goes to the plenum.
#6
Supreme Member
Join Date: Feb 2004
Location: So Cal
Posts: 1,581
Likes: 0
Received 2 Likes
on
2 Posts
Car: 89 IROC Z28
Engine: 357 TPI
Transmission: 700R4
Axle/Gears: 3.42 Posi
Re: Smog and 1 3/4 Vortec- headers New leak
"That hose Tee's off from the cruise control and tee's off near the plenum. So im still unsure what it all does. "
When the hose to the vacuum ball on my car collapsed, there wasn't enough vacuum to work the vents on HVAC correctly. At idle, the air went to the defrost vents and back to the air vents when I was moving again.
When the hose to the vacuum ball on my car collapsed, there wasn't enough vacuum to work the vents on HVAC correctly. At idle, the air went to the defrost vents and back to the air vents when I was moving again.
#7
Guest
Posts: n/a
Re: Smog and 1 3/4 Vortec- headers New leak
"That hose Tee's off from the cruise control and tee's off near the plenum. So im still unsure what it all does. "
When the hose to the vacuum ball on my car collapsed, there wasn't enough vacuum to work the vents on HVAC correctly. At idle, the air went to the defrost vents and back to the air vents when I was moving again.
When the hose to the vacuum ball on my car collapsed, there wasn't enough vacuum to work the vents on HVAC correctly. At idle, the air went to the defrost vents and back to the air vents when I was moving again.
Trending Topics
#9
Guest
Posts: n/a
Re: Smog and 1 3/4 Vortec- headers New leak
yeah with the exhaust leak and how everything was sounding, sure sounded like a classic lol.
Thread
Thread Starter
Forum
Replies
Last Post
92projectcamaro
Engine/Drivetrain/Suspension Parts for Sale
11
01-18-2016 08:00 AM