Southern California Area Southern California Members.

Shops are scared an wont install 3" Dual Cats

Thread Tools
 
Search this Thread
 
Old 05-14-2012, 04:40 PM
  #1  
Guest
Guest
 
Posts: n/a
Shops are scared an wont install 3" Dual Cats

Ok erased all that.. I did some research and here it is..

https://www.thirdgen.org/forums/exha...ml#post5273129

Last edited by CaliBranden; 05-14-2012 at 10:11 PM.
Old 05-15-2012, 02:25 PM
  #2  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

96 post an not a word from anyone on this board. One member from this board posted on that link an it was an aware other states. The help here like I said has dropped more 96% or more. 96 reviews is the 96% percent.
Old 05-16-2012, 12:30 PM
  #3  
Moderator

iTrader: (1)
 
Kevin91Z's Avatar
 
Join Date: Jul 1999
Location: Orange, SoCal
Posts: 10,943
Received 19 Likes on 17 Posts
Car: 1990 Pontiac Trans Am
Engine: 355 TPI siamesed runners
Transmission: Tremec T56
Axle/Gears: 12-Bolt 3.73
Re: Shops are scared an wont install 3" Dual Cats

Branden, you think maybe your recent outbursts on this board have pissed everyone off and they don't WANT to help you?
Old 05-16-2012, 12:38 PM
  #4  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by Kevin91Z
Branden, you think maybe your recent outbursts on this board have pissed everyone off and they don't WANT to help you?
Oh sorry that I stuck up for my knowledge that a 340rwhp car is not going to beat me in a race. You be saying the same thing also. I have talked to you all intill Im blue in the face an you all just can seem to see passed that.

They asked for my help here before. He needed an X pipe. Some of them probably dont have cats yet either.

That's fine I can help my own self.. Look I invited the guy to come on over and talk about this so this would stop. He chose not to. Truth hurts doesnt it.
Old 05-16-2012, 12:49 PM
  #5  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

They must be feeling the same way because they mentioned not much action on this board go some where else. I get along with people better out of this site area. No matter the battle it's over an if they needed my help I would still do what I could if they posted something on this board. Other than any of my other post I made it's just record and maybe some one else could follow the same steps an get the certain job done.
Old 05-16-2012, 12:54 PM
  #6  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

And you took your time to come to your Moderator board and post in my post. Yeah it was normal I dont blame you. But you got sassy an mentioned the power you all are making.. Same went for Justin.. So in that post I bet you there not even going to say anything to your comment. It's not for a battle but it's off topic and they will probably consider there post complete. With Justin and all his friends my post wasnt complete. As long as it was I wanted proof of the power there making and I was 2rwhp short an Gene was exactly right.. 342rwhp.
Old 05-16-2012, 01:22 PM
  #7  
Senior Member
 
ZZ3 Z28's Avatar
 
Join Date: Oct 2011
Location: Chicagoland area
Posts: 638
Likes: 0
Received 0 Likes on 0 Posts
Car: 1986 Z28
Engine: ZZ3
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by CaliBranden
96 post an not a word from anyone on this board. One member from this board posted on that link an it was an aware other states. The help here like I said has dropped more 96% or more. 96 reviews is the 96% percent.

Branden,

This is the first time I have seen this post and I don't know anything about any 'outbursts' you may have had. That is none of my concern. I read a lot of posts but answer few since I feel if I cannot add to the conversation I pass on the topic. The original topic of this thread is one like that. I live in Illinois so my knowledge of Cali emissions is nearly zero. I couldn't answer the question because I don't know what the laws are there. I can tell you that I've had a dual cat system on my '86 since 1996 when I went to the ZZ3 engine package. It is a GM Performance Parts exhaust system. Is it compliant with Cali emission statndards? I cannot answer that. I don't know the laws.

Here is where my posting gets tricky because there is a second reason why I respond to relatively few posts here. I don't know what the poster is saying. Between the slang, the abbreviations, and just poor grammar, for the life of me I simply cannot understand what the poster is trying to say. Some times I have to read the post several times to figure out what is being asked. If everyone here took a few seconds to re-read their posts making sure it makes sense to the reader before hitting the enter button, life here at TGO would be a whole lot better for all of us.
Old 05-16-2012, 01:30 PM
  #8  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

Im in 23 post on the first page..Sorry I dont hold a grudge I still post what I can. Im around more than most of you to be able to come onto this board an Im mostly the first post and Im the last post, just like the sticky's.. It's always been that way. Years ago there was no special treatment back then. I got the same percentage of help. What I usually need help with is small things like a gasket here recently. I try to make topic for a non experience person to see my post an see others helped an got the help from members. So you have to maintain helping no matter what it is even if your not exactly right with the problem but atleast your giving it a shot.

So yes Im useful on this site vs getting help from So Ca members on this section of this site. Like I told them when they said go to another part of the board nobody comes here more less. I know what's wrong with this section and I posted something like this board is retired an it's been this way since 2006..
Most of you are done with your hobby so you lose interest, I was the same way. So like I said this is a retired board some new members with upgraded engine tried to call a retire temp. out.. So like I said you asked for it.
14 people wanted to ban me an 4 members said I was useful.. Hell that's not that bad when all these people dont even know me an Im sure the members that do, didnt even get a chance to vote or if they would even consider. Dont blame me because you all cant control the boards. This your self was in there thought One Lsx that ran with Tpi made them to believe they could take out a 383ci and believe Tpi is old an sucks and you cant make any power out of it. We all know well they all can make the same amount of power. Just different cost. When they want to upgrade there internals lets see how the game turns out. But I know they probably just want some light bolt on's because they dont want problems with there such feelings of hard work.

Last edited by CaliBranden; 05-16-2012 at 04:20 PM.
Old 05-16-2012, 01:49 PM
  #9  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by ZZ3 Z28
Branden,

This is the first time I have seen this post and I don't know anything about any 'outbursts' you may have had. That is none of my concern. I read a lot of posts but answer few since I feel if I cannot add to the conversation I pass on the topic. The original topic of this thread is one like that. I live in Illinois so my knowledge of Cali emissions is nearly zero. I couldn't answer the question because I don't know what the laws are there. I can tell you that I've had a dual cat system on my '86 since 1996 when I went to the ZZ3 engine package. It is a GM Performance Parts exhaust system. Is it compliant with Cali emission statndards? I cannot answer that. I don't know the laws.

Here is where my posting gets tricky because there is a second reason why I respond to relatively few posts here. I don't know what the poster is saying. Between the slang, the abbreviations, and just poor grammar, for the life of me I simply cannot understand what the poster is trying to say. Some times I have to read the post several times to figure out what is being asked. If everyone here took a few seconds to re-read their posts making sure it makes sense to the reader before hitting the enter button, life here at TGO would be a whole lot better for all of us.
Word on that, You know what I always learned since the first date I used a computer for discussion. Is computers and how we each hava our own ways on what our brain and more less mind is thinking. It's computers hide person personal expressions. So that's why I invited him over and this such person took it as if I was still rambling. The truth is he is to young and didnt think like you mentioned and he should have came over or I go meet him some where else incase he felt any threat. That wasnt the purpose of the invite..

I would need to see a site and it would basically be for future info because I doubt Id spend that much for a Gm performance system. But if you have a link of the system or the part number if only Id post that for the future but it's a ZZ3 swap.. Is this like an Esclade engine?

To honestly to tell you the truth. About this topic nobody actually has the complete knowledge because they have not experienced it. You need a Fab an welder to know what needs done to make it work. Just like they know how to take your 2.50 an take it down to 2.25 an the 3" is exactly the same size so I dont see why it shouldnt work. It's the Y that may not line up right is what Im thinking. because my Y is for a 94016 cat size. They can probably get it to work. But 500 plus on some 3" cats it's a lot of money. I can say I expect this help but just was asking can some one try and help figure it out. The other top hp cars here dont have duals if they do they have a 94016 cat still an the singles they have the 3" no problem.

This is the first post of a person trying to make fitment of a 3" cat that is exactly the same size as the 2.25 it shows it right there in the link. So it has to work. It's just the Y if it can expand to 3" an I probably should just let the shop provide there own on that rather than buying the Y dual from Summit..

Thanks for giving it a try.. It pleasant of you to discuss the topic than most that dont have smog states. But I think of there termnology how can they get the info when they have no Smog there.. So they can entirely cant always help. Then a Ca members say hey you dont care watch what's going to happen there will be smog stations all over U.S.. Rumor I heard from a smog expert is in the future there wont be any Test Only stations.. Losing Revune maybe so they might change.
Old 05-16-2012, 02:20 PM
  #10  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

Kevin it was your sole responsibility to move that thread to the Racing section. It's your fault you failed. Don't put this on me, like I said in other post don't even talk about racing here it's not the right section. You all years ago allowed us to review all your comments like Mike said. So don't you dare put this all on me. You have been made fun of years ago. Did I once say anything bad about you. Stand up be a man fix your mistakes. I tried something else I said I was sorry things went this way. But bottom line is don't start it. If you start it an the subject becomes racing move the thread.
Old 05-16-2012, 03:30 PM
  #11  
Supreme Member

iTrader: (1)
 
KiLLJ0Y's Avatar
 
Join Date: Feb 2005
Location: Pleasant Grove, Utah
Posts: 2,642
Likes: 0
Received 2 Likes on 2 Posts
Car: 1993 GMC Typhoon
Engine: 4.3 Turbo
Transmission: 4L60
Axle/Gears: 3.42
Re: Shops are scared an wont install 3" Dual Cats

Oh my gosh Brandon, your lengthy posts and jabbering and lack of punctuation and going on and on and on pisses us all off.

You even said a few weeks ago, that you were taking a break from the boards but you did the opposite, and keep posting things that don't even belong in this section. If you need techinal help, go to the proper section and get it there.
Old 05-16-2012, 03:56 PM
  #12  
Senior Member

 
Z28FAST1's Avatar
 
Join Date: May 2005
Location: Baldwin Park
Posts: 741
Likes: 0
Received 1 Like on 1 Post
Re: Shops are scared an wont install 3" Dual Cats

http://maps.google.com/maps/place?oe=utf-8&rls=org.mozilla:en-USfficial&client=firefox-a&um=1&ie=UTF-8&q=muffler+shop,+lake+elsinore&fb=1&gl=us&hq=muffler+shop,&hnear=0x80dc9a2631993a33:0x715d4ca8aa0854d9,Lake+Elsinore,+CA&cid=9345023331761829531

Here’s a place that’ll take car of whatever you want. They work with custom 3inch piping(y-pipe, ex-pipes, etc) on a regular basis and even do nice turbo down-pipe set-ups. They guy use to do all the work for CMS and he did a good job on my 3 inch y-pipe. Ask for Eddie.

Originally Posted by CaliBranden


14 people wanted to ban me an 4 members said I was useful.. Hell that's not that bad when all these people dont even know me an Im sure the members that do, didnt even get a chance to vote or if they would even consider. Dont blame me because you all cant control the boards. This your self was in there thought One Lsx that ran with Tpi made them to believe they could take out a 383ci and believe Tpi is old an sucks and you cant make any power out of it. We all know well they all can make the same amount of power. Just different cost. When they want to upgrade there internals lets see how the game turns out. But I know they probably just want some light bolt on's because they dont want problems with there such feelings of hard work.
Don’t know why you keep bringing up the LSx guys?

The reason why bolt-on LSx believe they will hang with a 383 TPI is because there is no proof of this 383 running faster than a fully built 350-360 ci TPI's.

CaliB's Built 383 1/8 time(alleged):8.0-8.1? MPH:??
Vince Built 355?1/8 mile: 8.1-8.2 MPH: 89-90
TPITERR Bolt-on LSx 1/8 mile: 8.1-8.2 MPH: 90-91MPH

Doesn't make it so unbelievable. I guess we'll have to see.
Old 05-16-2012, 04:06 PM
  #13  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by KiLLJ0Y
Oh my gosh Brandon, your lengthy posts and jabbering and lack of punctuation and going on and on and on pisses us all off.

You even said a few weeks ago, that you were taking a break from the boards but you did the opposite, and keep posting things that don't even belong in this section. If you need techinal help, go to the proper section and get it there.
There is nothing wrong with my post. Sorry I don't put all information into one sentence. Your off topic because that would be a discussion of education. None of you In the State of California had to graduate with the amount of credits I had to way beyond your graduation requirements.

I took my break off the boards the subject was closed. I'm on other topics an discussion. You can bark all you want but that's not going to stop me from posting. Why don't you all contact all the Moderators on TGO an see where you get until then just keep your non sense to yourself.

What pisses all you off? Like some one said before stop gaining interest in my post If I'm discussing something from a member that has made a comment why don't you not say anything until the topic is dealt with? You cant wait for that. Are these people so important in your life so I have a long conversation about the subject you people get pissed off. Go see anger management or behavioral places then. And there is nothing wrong with my Grammar I use spell check because I type a fast rate.. And that's why you always see .. in certain area's. This is a Southern Ca area open for So ca area discussion. It isn't meant for you all in regard to this subject. It's here for a purpose in which what job gets completed. Got It? Yourself you dont even post anything on this section. Sorry Dude not a coward with anyone on this Section.
Old 05-16-2012, 04:09 PM
  #14  
Supreme Member

iTrader: (7)
 
Dyno Don's Avatar
 
Join Date: Mar 2000
Location: Orange, CA
Posts: 5,674
Likes: 0
Received 106 Likes on 65 Posts
Car: '90 Trans Am-12.45@110.71
Engine: 355 w/AFR 195's Elem. 400/430 HP/TQ
Transmission: Tremec T-56
Axle/Gears: 12 Bolt 3.73
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by CaliBranden

That's fine I can help my own self..
Then, why don't you go do it and stop posting all this crap on this board.
Old 05-16-2012, 04:14 PM
  #15  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by Z28FAST1
http://maps.google.com/maps/place?oe=utf-8&rls=org.mozilla:en-USfficial&client=firefox-a&um=1&ie=UTF-8&q=muffler+shop,+lake+elsinore&fb=1&gl=us&hq=muffler+shop,&hnear=0x80dc9a2631993a33:0x715d4ca8aa0854d9,Lake+Elsinore,+CA&cid=9345023331761829531

Here’s a place that’ll take car of whatever you want. They work with custom 3inch piping(y-pipe, ex-pipes, etc) on a regular basis and even do nice turbo down-pipe set-ups. They guy use to do all the work for CMS and he did a good job on my 3 inch y-pipe. Ask for Eddie.



Don’t know why you keep bringing up the LSx guys?

The reason why bolt-on LSx believe they will hang with a 383 TPI is because there is no proof of this 383 running faster than a fully built 350-360 ci TPI's.

CaliB's Built 383 1/8 time(alleged):8.0-8.1? MPH:??
Vince Built 355?1/8 mile: 8.1-8.2 MPH: 89-90
TPITERR Bolt-on LSx 1/8 mile: 8.1-8.2 MPH: 90-91MPH

Doesn't make it so unbelievable. I guess we'll have to see.
did you seZZ3 Z28 post. You need to re read the thread again an then understand it. Kevin brought the subject up. I just suggested where the post should have been moved to.
So there Im Alleged when Im the one that drove the car an got the time slip.
So were running all the same numbers who cares. Im talking about 340rwhp Lsx's then it didnt make any sense. If I wanted to rebuild my 383ci the way I want it set up you be the one changing your combination an Im sure the parts are not cheap.

You may not have seen the thread an Kevin seen the thread I was done I figured it out. Your wasting your time here. I have it covered I'll be ok. But thanks for the Olive Branch. It was a two post thread.. And this section shows Poor Sportsman ship.. That's why I posted here..
Old 05-16-2012, 04:15 PM
  #16  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by Dyno Don
Then, why don't you go do it and stop posting all this crap on this board.
When you an your Son can afford to buy the site then go for it till then.. Old man I dont like you..
Old 05-16-2012, 05:08 PM
  #17  
Senior Member

 
Z28FAST1's Avatar
 
Join Date: May 2005
Location: Baldwin Park
Posts: 741
Likes: 0
Received 1 Like on 1 Post
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by CaliBranden
There is nothing wrong with my post. Sorry I don't put all information into one sentence. Your off topic because that would be a discussion of education. None of you In the State of California had to graduate with the amount of credits I had to way beyond your graduation requirements.

And there is nothing wrong with my Grammar I use spell check because I type a fast rate..
You know there is a difference between spelling typos and grammar errors?

Spell check doesn't fix problems with punctuation, syntax, semantics and I imagine phonetics.


Originally Posted by CaliBranden
did you seZZ3 Z28 post. You need to re read the thread again an then understand it. Kevin brought the subject up. I just suggested where the post should have been moved to.
So there Im Alleged when Im the one that drove the car an got the time slip.
So were running all the same numbers who cares. Im talking about 340rwhp Lsx's then it didnt make any sense. If I wanted to rebuild my 383ci the way I want it set up you be the one changing your combination an Im sure the parts are not cheap.

You may not have seen the thread an Kevin seen the thread I was done I figured it out. Your wasting your time here. I have it covered I'll be ok. But thanks for the Olive Branch. It was a two post thread.. And this section shows Poor Sportsman ship.. That's why I posted here..
Where's the timeslip or video to this alleged 1/8 mile time?

Lately, this "poor sportsmanship" seems to concentrated towards one person that seems to be wasting everybody's time
Old 05-16-2012, 05:28 PM
  #18  
Supreme Member

iTrader: (8)
 
92purplehaze's Avatar
 
Join Date: Apr 2006
Location: Santa Ana, CA
Posts: 1,012
Received 5 Likes on 4 Posts
Car: 90 IROC-Z
Engine: LS1
Transmission: M6
Axle/Gears: 9" spooled 3.70
Re: Shops are scared an wont install 3" Dual Cats

Branden why must my name be brought up in everyone of your threads? Between that and your constant invitations to your house I am a little creeped out.
Old 05-16-2012, 06:08 PM
  #19  
Member
iTrader: (1)
 
bungo78's Avatar
 
Join Date: Jan 2009
Location: Staten Island, NY ; Long Beach, CA
Posts: 368
Likes: 0
Received 0 Likes on 0 Posts
Car: 88' TA Digital Dash
Engine: 350 TPI
Transmission: 700r4
Axle/Gears: 3:23 Posi Disk 10 Bolt
Re: Shops are scared an wont install 3" Dual Cats

First of all Brandon,

The way you speak (type) on this board is a reflection of who you are. You make rambling antagonistic opinions. You feel that you have a right to say whatever you want, yet can't accept the fact that others have the same right as yourself.

Many people (including myself) don't comment or desire to share/suggest idea's or remedies due to the fact that you seem unstable emotionally. You bring up and disclose thoughts and interactions with others that "has nothing to do with the point of the thread".

You get aggressive and a tad sensitive in your words in regards to the 383 power etc, etc, etc...... I for one don't care about your engine. It's an urban legend in my book. like bigfoot, claimed to have been seen and heard from many, many moons ago.

I suggest you stick to the point of your thread. Focus on the info that gets you to the desired result. Optimal information to find a conclusion to your answer. Rambling and airing dirty laundry and expressing horsepower powerplant braggadaccio in an aggressive antagonistic form only get's you 2 things. Crickets or locked threads......
Old 05-16-2012, 09:12 PM
  #20  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by bungo78
First of all Brandon,

The way you speak (type) on this board is a reflection of who you are. You make rambling antagonistic opinions. You feel that you have a right to say whatever you want, yet can't accept the fact that others have the same right as yourself.

Many people (including myself) don't comment or desire to share/suggest idea's or remedies due to the fact that you seem unstable emotionally. You bring up and disclose thoughts and interactions with others that "has nothing to do with the point of the thread".

You get aggressive and a tad sensitive in your words in regards to the 383 power etc, etc, etc...... I for one don't care about your engine. It's an urban legend in my book. like bigfoot, claimed to have been seen and heard from many, many moons ago.

I suggest you stick to the point of your thread. Focus on the info that gets you to the desired result. Optimal information to find a conclusion to your answer. Rambling and airing dirty laundry and expressing horsepower powerplant braggadaccio in an aggressive antagonistic form only get's you 2 things. Crickets or locked threads......
My God look I didnt bring the crap up someone else did that, so I settled what I think the way it should have went. You all cant seem to see passed that. When is speaking of some ones hp dirty laundry? Sorry I dont understand that. Fact is Fact. You acting like Fact or Fiction.. Im touchy over a 383 muah nah really.. I gave many options of a race.. I even gave the idea put there lsx's swaps in a magazine over our Tpi in a lsx vs 383ci event because for now No Tpi is down to race. Oh they dont have a 1/4 mile time from me so it's senseless.. 383ci seem to most just Rumor's.. Most 383ci are Vortec's.. I already mentioned if I built my 383 for the second time it be way above any 355 360 or a Lsx' swap with bolt on's.. You all are so tripped out over a few locked threads having a hissy fit like a 3 year old.. Get real.. When Im ready to race that such non friendly run. Im going to bring out the biggest rudeness there is. I'll drag you all by the ear and you will know Im ready. A 383ci Vortec..
Old 05-16-2012, 09:27 PM
  #21  
Supreme Member

iTrader: (56)
 
articwhiteZ's Avatar
 
Join Date: Sep 2009
Location: Spokane WA
Posts: 3,765
Received 86 Likes on 81 Posts
Car: 92 Lingenfelter Z28 articwhite
Engine: Aluminum 615BBC
Transmission: Th400wbrake/curri entps9" locker
Axle/Gears: 4.11/4.30/4.56
Re: Shops are scared an wont install 3" Dual Cats

"You get aggressive and a tad sensitive in your words in regards to the 383 power etc, etc, etc...... I for one don't care about your engine. It's an urban legend in my book. like bigfoot, claimed to have been seen and heard from many, many moons ago"

still LMAO

thats some funny stuff! right there,...urban legend.../ creeped out

Look out for a dry well in the basment... and the Water hose..(it puts lotion on it's skin, or it get's the hose agen)

Last edited by articwhiteZ; 05-16-2012 at 09:32 PM.
Old 05-16-2012, 09:40 PM
  #22  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by 92purplehaze
Branden why must my name be brought up in everyone of your threads? Between that and your constant invitations to your house I am a little creeped out.
Sorry Justin I would rather pm this I spent the time but Tgo logs you out and you lose all your information.. I would have to research why you think I keep using your name. You sure had a reason to start a bunch of b.s that I know I took to far an serious. I told you before that was not cool. The header thread I said hey man sorry but you put my name on there to drop a bomb shell. That's why Im all over your case. All the hp talk.. All that information isnt even your car. That's Terr car.. So that does not involve you.. Most of the talk is Vincent's Z28 lsx's buddy that beat him. Im mostly talking about him because we both are going to be running the same numbers near and I know that for fact. He beat Vincent another run non matched or another car is Vincent cant hook the rwhp. Vincent probably still using a built wc t-5 and the excuse always with the manuals is a granny shift clutch fork. Auto's they perform and mostly we have no excuse of missing a shift. It's there always. Maybe a Tv tuning might be an excuse. Honeslty Justin we are going to race later this year.. Probably Irwindale.. Because I will be bringing a friend and he can mostly go to Irwindale. And honestly you know your not going to win. Im just being honest. You not going to run a 8.0 run.. And your going to need some rims an slicks or et streets. And when we meet your going to say to your self wow he doesnt look likw this $$$ hole you all been claming me to be.
With Mike's last conversation. Yeah maybe I changed some. Im still cool. But the problem is rather this happend or didnt Im not friends with 99% people on this board. So it's harder for me to speak or make topics an the direction I need to take the topic. It's mostly for later on.. Just a review and record that I did the work.. I will never again have work done on my car or buy stuff an not keep the information. Don gave me nothing an he got paid. I think he is that way to protect himself.. I already had a private conversation with a member that nobody will ever find out who it is.. And if they see this part of conversation that person knows it's private. It's not talking behind the persons back it was personal exchange of information. And he also knows a secret at Irwindale when you seen me deep stage that Ls1..You will never figure it out.. So Justin will we part from here it's No..Do I say Im sorry yes. But we dont part from here. So for the rest of you.. I dont care what you think of me.. The exit is X at the end of the day that's all you are anyways. I dont carry your thoughts with me.. I live my life just like any other day..
Old 05-16-2012, 09:42 PM
  #23  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by articwhiteZ
"You get aggressive and a tad sensitive in your words in regards to the 383 power etc, etc, etc...... I for one don't care about your engine. It's an urban legend in my book. like bigfoot, claimed to have been seen and heard from many, many moons ago"

still LMAO

thats some funny stuff! right there,...urban legend.../ creeped out

Look out for a dry well in the basment... and the Water hose..(it puts lotion on it's skin, or it get's the hose agen)
Nah fool you dont watch enough T.V that's legend from Back East his kneck of the woods, Here will kill a bear an go in the dark after this sucker an blow it off the face of earth.

Last edited by CaliBranden; 05-16-2012 at 09:45 PM. Reason: Only time you all get here it's always me you look after
Old 05-16-2012, 09:50 PM
  #24  
Senior Member

 
Z28FAST1's Avatar
 
Join Date: May 2005
Location: Baldwin Park
Posts: 741
Likes: 0
Received 1 Like on 1 Post
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by bungo78
You get aggressive and a tad sensitive in your words in regards to the 383 power etc, etc, etc...... I for one don't care about your engine. It's an urban legend in my book. like bigfoot, claimed to have been seen and heard from many, many moons ago.
So Cal TGO Quote of the Year!!!
Old 05-16-2012, 10:25 PM
  #25  
Supreme Member

iTrader: (1)
 
KiLLJ0Y's Avatar
 
Join Date: Feb 2005
Location: Pleasant Grove, Utah
Posts: 2,642
Likes: 0
Received 2 Likes on 2 Posts
Car: 1993 GMC Typhoon
Engine: 4.3 Turbo
Transmission: 4L60
Axle/Gears: 3.42
Re: Shops are scared an wont install 3" Dual Cats

vote to Ban, or have someone edit this kids posts.. he clearly has self projection issues and needs medication. Brandon, come into my ER, we'll get you some prozac, ativan.. or maybe a clue... you need one.
Old 05-16-2012, 11:06 PM
  #26  
Supreme Member

iTrader: (8)
 
92purplehaze's Avatar
 
Join Date: Apr 2006
Location: Santa Ana, CA
Posts: 1,012
Received 5 Likes on 4 Posts
Car: 90 IROC-Z
Engine: LS1
Transmission: M6
Axle/Gears: 9" spooled 3.70
Re: Shops are scared an wont install 3" Dual Cats

Remember Branden, I never claimed any HP #s or to be faster than anyone else than my old tpi. You seem to be balling up everyone's words into one lsx super enemy.
Old 05-17-2012, 02:16 AM
  #27  
Member
 
rock861261's Avatar
 
Join Date: Jan 2007
Location: Covina, Ca
Posts: 464
Likes: 0
Received 0 Likes on 0 Posts
Re: Shops are scared an wont install 3" Dual Cats

why is every body even commenting anymore hes just an internet warrior... he will probably never get his "running car" running again for anybody to even have a chance to race him...
Old 05-17-2012, 02:16 AM
  #28  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

Justin all I was asking was to admit you were wrong the discussion should have never happend. I said I was sorry about your header thread. But you wont man up an say you were wrong that's all Im saying. Maybe now that you understand there is no use for me to race you maybe you will fade away an be gone. You been cool but you started all this B.S and Im not into playing these peoples games. Be real.
Old 05-17-2012, 02:22 AM
  #29  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by rock861261
why is every body even commenting anymore hes just an internet warrior... he will probably never get his "running car" running again for anybody to even have a chance to race him...
Repeat your comment is useless. The car will be running. Seems Justin knows an understands where he stands an it's over like I said let him fade away. An let Terr finish his probabtion. We can roll there faster Lsx swap when Im ready. The car was running before I removed the water pump. Your missing some threads Im doing for my own purpose for the future. Im rebuilding my front end right now. So understand this there is no event for Justin to prove anything with his Lsx swap. Let them plan the event later. There is no purpose to do it now. Irwindale right now is a oiled track not worth it right now. Conditions need to get better.
Old 05-17-2012, 02:35 AM
  #30  
Member
iTrader: (1)
 
bungo78's Avatar
 
Join Date: Jan 2009
Location: Staten Island, NY ; Long Beach, CA
Posts: 368
Likes: 0
Received 0 Likes on 0 Posts
Car: 88' TA Digital Dash
Engine: 350 TPI
Transmission: 700r4
Axle/Gears: 3:23 Posi Disk 10 Bolt
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by Z28FAST1
So Cal TGO Quote of the Year!!!
Thank you!
Old 05-17-2012, 02:43 AM
  #31  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by KiLLJ0Y
vote to Ban, or have someone edit this kids posts.. he clearly has self projection issues and needs medication. Brandon, come into my ER, we'll get you some prozac, ativan.. or maybe a clue... you need one.
Hey Doc those are anti depression pills. I have a primary doctor I dont have any of those dis orders. My wifes dad was a doctor an she would know if I had something wrong with me same with my own doctor. I tell you my problem I have to much fat in my blood Im not thin anymore. I gained 65 pounds. So gaining that much weight sure your going to have a lot of fat in your blood. So i dont eat any animal fat any more for now. And of course there is meds for that Doc.

I know what you all need, you all need some valium an chill out and stop being so rude. That's what you all need. Im a single person attacks from every where.

Dave in the passed you didnt get a long with my friends, remember when you got attacked for making fun of disabled mental children.. You remember that becuase I know you know that was not cool.

We have met yes and we have crossed paths but internet we dont get a long. Period..

This thread is done and over with an we got further on this thread with partial of the truth so let by gones be by gones. Doesn't mean we have to be friends, I dont expect that.

I'll probably be going to irwindale myself and racing my ride alone since no one is interested in the future event. Will see what I run with more experience an with out a helmet so I can better focus on my rpm. And get my shift points corrected. Run some trial runs of some trans adjusments an check my fpr settings.
Old 05-17-2012, 02:49 AM
  #32  
Member
 
rock861261's Avatar
 
Join Date: Jan 2007
Location: Covina, Ca
Posts: 464
Likes: 0
Received 0 Likes on 0 Posts
Re: Shops are scared an wont install 3" Dual Cats

the thing you arent understanding is that a lsx swap is a few hundred pounds lighter then your 383 so basically a standard swap has the same amount if power none the less Im sure you havent raced in a few years so I would be you would get tree'd 9/10 if it ever gets done that is..
Old 05-17-2012, 02:50 AM
  #33  
Member
 
rock861261's Avatar
 
Join Date: Jan 2007
Location: Covina, Ca
Posts: 464
Likes: 0
Received 0 Likes on 0 Posts
Re: Shops are scared an wont install 3" Dual Cats

LMAO FAT IN THE BLOOD!
Old 05-17-2012, 03:37 AM
  #34  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by rock861261
LMAO FAT IN THE BLOOD!
Everybody has fat in there blood I'm not talking cholesterol. Not something to laugh about.
Old 05-17-2012, 03:43 AM
  #35  
Supreme Member

iTrader: (8)
 
92purplehaze's Avatar
 
Join Date: Apr 2006
Location: Santa Ana, CA
Posts: 1,012
Received 5 Likes on 4 Posts
Car: 90 IROC-Z
Engine: LS1
Transmission: M6
Axle/Gears: 9" spooled 3.70
Re: Shops are scared an wont install 3" Dual Cats

Ill be at irwindale tomorrow (today).
Old 05-17-2012, 03:49 AM
  #36  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by rock861261
the thing you arent understanding is that a lsx swap is a few hundred pounds lighter then your 383 so basically a standard swap has the same amount if power none the less Im sure you havent raced in a few years so I would be you would get tree'd 9/10 if it ever gets done that is..
Im aware of that. I know Im heavy.. makes the cubes more less be the same and you have a non full out built 383ci just a standard gm performance 383.. That's all it is. I dont know what your talking about getting tree'd.. I cant shave 300lbs with Alum heads a Ac delete. But I can say I can later make changes and they wont be able to put out the rwhp later. Why we talking about this subject again there is no purpose to race each other, Lsx's can go when ever they want an post there results if they like, I'll probably do the same. I'll even do it if I run slower than a 8.01 and I will tell you why. Why is because my cars timing is detuned. It's not chipped for track. It's chipped for smog and I have another chip with timing removed. I have to buy all the tuning equipment myself and have Bds tune my car all over again. But it wont be on the dyno it's going to be street tuning With Wide Band. After that is done then I will perform the max of the 383ci an what it is built at it's current specs.
Old 05-17-2012, 11:17 AM
  #37  
On Probation

iTrader: (9)
 
TPI TERR's Avatar
 
Join Date: Feb 2005
Location: So Cal
Posts: 2,042
Likes: 0
Received 2 Likes on 2 Posts
Car: 87 IROC-Z
Engine: LsX
Transmission: MN12 6speed
Axle/Gears: 3:42
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by CaliBranden
All the hp talk.. All that information isnt even your car. That's Terr car..
huh?

whats so special about tpi terrs car?
you appear to get usernames confused and bunch up a lot of comments into one ultimate lsx username.

i am very very confused cuz i cannot follow when u clutter this forum.
yes im on probation. i guess i am. i can still post on here.
but this is the main reason i dont log on to tgo as much.
bunch of irrelevant, unnecessary comments, unstable behaviors and most importantly not the way to keep the so cal forum alive.

Last edited by TPI TERR; 05-17-2012 at 11:44 AM. Reason: Keeping it clean
Old 05-17-2012, 11:36 AM
  #38  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by 92purplehaze
Ill be at irwindale tomorrow (today).
Best Of luck to you Justin, have a safe trip home.
Old 05-17-2012, 11:41 AM
  #39  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by TPI TERR
whats so special about tpi terrs car?
you appear to get usernames confused and bunch up a lot of comments into one ultimate lsx username.

i am very very confused cuz i cannot follow when u clutter this forum.
yes im on probation. i guess i am. i can still post on here.
but this is the main reason i dont log on to tgo as much.
bunch of irrelevant, unnecessary comments, unstable behaviors and most importantly not the way to keep the so cal forum alive.
Terr that's just because some one else used your dyno results. There really not an actually anything bad in other threads. It's just the event we may want to hold that's all it is..Sorry not my fualt to waste your time because the subject was about the 3" swap an like you all said with a lsx thread. Some one always comes in an it flips everything into a battle. That's what happend Terr. Anyways I think we got a lot further in this post. I dont bash people, I may roam around other since of the conversation but no I dont take low blows. It just shows there ball game ignorant.

I dont hold any thoughts about your probation I heard that story. Nothing really isnt against you with being on probation. I have mentioned it
because you had pass problems. members dont have emails of the story sent to why your on probation. They just cant do it. So far as
I have said it's just that your on probation nothing worse.

Last edited by CaliBranden; 05-17-2012 at 11:46 AM.
Old 05-17-2012, 11:53 AM
  #40  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

I would show you pics of my tear down but my camera is showing low battery with new batterys, probably been dropped or something I need to figure out what's really going on. Builds that are expensive take awhile your talking about an estimate of 1,500 dollars.
Old 05-17-2012, 11:55 AM
  #41  
On Probation

iTrader: (9)
 
TPI TERR's Avatar
 
Join Date: Feb 2005
Location: So Cal
Posts: 2,042
Likes: 0
Received 2 Likes on 2 Posts
Car: 87 IROC-Z
Engine: LsX
Transmission: MN12 6speed
Axle/Gears: 3:42
Re: Shops are scared an wont install 3" Dual Cats

im just saying i see my user name on each and every thread you create.

i have no problem with this so called probation.


dont mean to hijack your thread. . carry on
Old 05-17-2012, 12:10 PM
  #42  
Guest
Guest
 
Posts: n/a
Re: Shops are scared an wont install 3" Dual Cats

You and your Lsx friends just need to stand up an post what ever you need here. Of course this is a So Ca sctpi site now. That's why that club was created. So I'm sure that's the problem. Real life information then a Lsx crowd speaks an there is problems. I don't want any problems. I wrote to Tgo about all this an it's equal but in a different stand point I'm not bomb shelling the individual, they do. There is Internet restraining orders my brother in law in a Sergeant in Ca police force. This is some investigation that would need taken place by the district attorney an they would probably notify the department that deals with illegal modifications with such members. Tgo cant control harassment but there is other ways. And my wife works for an attorney so I can always get any information I need in this such matter.
Old 05-17-2012, 12:37 PM
  #43  
On Probation

iTrader: (9)
 
TPI TERR's Avatar
 
Join Date: Feb 2005
Location: So Cal
Posts: 2,042
Likes: 0
Received 2 Likes on 2 Posts
Car: 87 IROC-Z
Engine: LsX
Transmission: MN12 6speed
Axle/Gears: 3:42
Re: Shops are scared an wont install 3" Dual Cats

...

Last edited by TPI TERR; 05-18-2012 at 12:39 AM.
Old 05-17-2012, 12:38 PM
  #44  
On Probation

iTrader: (9)
 
TPI TERR's Avatar
 
Join Date: Feb 2005
Location: So Cal
Posts: 2,042
Likes: 0
Received 2 Likes on 2 Posts
Car: 87 IROC-Z
Engine: LsX
Transmission: MN12 6speed
Axle/Gears: 3:42
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by CaliBranden
You and your Lsx friends just need to stand up an post what ever you need here. Of course this is a So Ca sctpi site now. That's why that club was created. So I'm sure that's the problem. Real life information then a Lsx crowd speaks an there is problems. I don't want any problems. I wrote to Tgo about all this an it's equal but in a different stand point I'm not bomb shelling the individual, they do. There is Internet restraining orders my brother in law in a Sergeant in Ca police force. This is some investigation that would need taken place by the district attorney an they would probably notify the department that deals with illegal modifications with such members. Tgo cant control harassment but there is other ways. And my wife works for an attorney so I can always get any information I need in this such matter.
I wanted to stay on topic but It doesn't go too well here.
Good luck with your build , from cats , to water pump, steering box, Suspension. Minorillegal modifications, stage 3 chip, and tires looks like you have a lot work ahead of you.
Later
Old 05-17-2012, 10:19 PM
  #45  
Supreme Member

iTrader: (1)
 
KiLLJ0Y's Avatar
 
Join Date: Feb 2005
Location: Pleasant Grove, Utah
Posts: 2,642
Likes: 0
Received 2 Likes on 2 Posts
Car: 1993 GMC Typhoon
Engine: 4.3 Turbo
Transmission: 4L60
Axle/Gears: 3.42
Re: Shops are scared an wont install 3" Dual Cats

Actually the Ativan is anti-anxiety. I figured you are depressed about something, hence the continual posts, but then again I see how agitated you get on here so Ativan would work.

Honestly, never had a problem with you, until you openly bashed and threatened a few friends of mine on the boards, as a friend I defend them.

But what really gripes people is your incoherent paragraphs and the way you go off on tangents or the way you give out way too much info about yourself, or act like you are better than people. I personally don't care how many credits you needed in school and I don t think we need to know about your hyperlipidemia.

I don't know why you feel the need to ramble to try to prove yourself over and over but I have a hunch, people are tired of seeing that on this board. Again, take a step back, relax, read the boards and think about what you post before you post it, it's very hard to read and make sense of your posts
Old 05-17-2012, 10:59 PM
  #46  
Senior Member
 
TheMonster's Avatar
 
Join Date: Jun 2009
Location: Evansville, IN
Posts: 511
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Z28
Engine: Forged 355
Transmission: 700r4
Axle/Gears: 2.73
Re: Shops are scared an wont install 3" Dual Cats

? ?
Old 05-18-2012, 01:23 AM
  #47  
Supreme Member

 
itsMikey's Avatar
 
Join Date: Apr 2009
Location: Scottsdale, AZ
Posts: 2,852
Likes: 0
Received 1 Like on 1 Post
Car: 89 GTA/93 S13/91 Si
Engine: 5.7 350 TPI
Transmission: 700R4
Axle/Gears: 3.23
Re: Shops are scared an wont install 3" Dual Cats

Trolololol
Old 05-18-2012, 11:37 AM
  #48  
Junior Member
iTrader: (1)
 
xknightriderx24's Avatar
 
Join Date: Nov 2010
Location: OC, CA
Posts: 39
Likes: 0
Received 1 Like on 1 Post
Car: 1990 GTA
Engine: 5.7 V8
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by KiLLJ0Y
Actually the Ativan is anti-anxiety. I figured you are depressed about something, hence the continual posts, but then again I see how agitated you get on here so Ativan would work.

Honestly, never had a problem with you, until you openly bashed and threatened a few friends of mine on the boards, as a friend I defend them.

But what really gripes people is your incoherent paragraphs and the way you go off on tangents or the way you give out way too much info about yourself, or act like you are better than people. I personally don't care how many credits you needed in school and I don t think we need to know about your hyperlipidemia.

I don't know why you feel the need to ramble to try to prove yourself over and over but I have a hunch, people are tired of seeing that on this board. Again, take a step back, relax, read the boards and think about what you post before you post it, it's very hard to read and make sense of your posts
Well said.

I don't know this guy Branden but it sounds like he's retired, and most people when they retire they take up a hobby like fishing, golfing, collecting coins etc.......but it sounds like his hobby is to post on tgo all day. Lol
Old 05-18-2012, 12:47 PM
  #49  
Moderator

iTrader: (1)
 
Kevin91Z's Avatar
 
Join Date: Jul 1999
Location: Orange, SoCal
Posts: 10,943
Received 19 Likes on 17 Posts
Car: 1990 Pontiac Trans Am
Engine: 355 TPI siamesed runners
Transmission: Tremec T56
Axle/Gears: 12-Bolt 3.73
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by CaliBranden
Kevin it was your sole responsibility to move that thread to the Racing section. It's your fault you failed. Don't put this on me, like I said in other post don't even talk about racing here it's not the right section. You all years ago allowed us to review all your comments like Mike said. So don't you dare put this all on me. You have been made fun of years ago. Did I once say anything bad about you. Stand up be a man fix your mistakes. I tried something else I said I was sorry things went this way. But bottom line is don't start it. If you start it an the subject becomes racing move the thread.
What thread?

Is it wrong to sit back and watch Branden hang himself with his own rope?
Old 05-18-2012, 12:51 PM
  #50  
Moderator

iTrader: (1)
 
Kevin91Z's Avatar
 
Join Date: Jul 1999
Location: Orange, SoCal
Posts: 10,943
Received 19 Likes on 17 Posts
Car: 1990 Pontiac Trans Am
Engine: 355 TPI siamesed runners
Transmission: Tremec T56
Axle/Gears: 12-Bolt 3.73
Re: Shops are scared an wont install 3" Dual Cats

Originally Posted by CaliBranden
You and your Lsx friends just need to stand up an post what ever you need here. Of course this is a So Ca sctpi site now. That's why that club was created. So I'm sure that's the problem.
The SoCal forum on thirdgen.org is for ALL Thirdgenners in SoCal. Its not owned by SCTPI or SC3G or GM Eternal or Cali Generals or any other clubs or individuals not already working for thirdgen.org or Internet Brands. You dont have to be a member of any club to post here.


Quick Reply: Shops are scared an wont install 3" Dual Cats



All times are GMT -5. The time now is 04:17 PM.