Spohn rear coilover issue
06-10-2007, 09:06 AM
#1
Member
Thread Starter
iTrader: (4)
Join Date: Feb 2004
Posts: 266
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Z28
Engine: LS1
Transmission: t-56
Axle/Gears: 3.73 4th gen 10 bolt
Spohn rear coilover issue
I just put on my spohn rear coiloers. How low are these things supposed to allow you to go? I have these adjusted all the way down, and my car still seems to be sitting a tad HIGHER than stock. Now I don't have my rear hatch on the car and there is no interior panels, but even with me standing in the back the car is only at stock ride height at best. I have the 200# springs on them which is stiffer than stock, but still I should be able to go lower than it is. Anyone have any ideas?
06-10-2007, 12:54 PM
#2
Banned
Join Date: Apr 2007
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Re: Spohn rear coilover issue
Go to a shorter free height 200 lb spring.
Ex: you can have 12" tall 200 lb springs, you can have 10" tall 200 lbs springs, you can have 8" tall 200 lb springs...etc
Ex: you can have 12" tall 200 lb springs, you can have 10" tall 200 lbs springs, you can have 8" tall 200 lb springs...etc
06-10-2007, 03:10 PM
#3
Member
Thread Starter
iTrader: (4)
Join Date: Feb 2004
Posts: 266
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Z28
Engine: LS1
Transmission: t-56
Axle/Gears: 3.73 4th gen 10 bolt
Re: Spohn rear coilover issue
That's probably what I will do...but I just wanted to see if anyone else who had these experienced this problem with the 12" springs that it came with.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
