sway bars sizes for GTA's or I-rocZ28's
05-06-2008, 09:52 PM
#1
Member
Thread Starter
Join Date: Jun 2007
Location: Monterey Park,Ca
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Firebird Formula WS6
Engine: LO3 305 tbi
Transmission: 700 R4
Axle/Gears: 3gen housing zexel torsen posi 3.42
sway bars sizes for GTA's or I-rocZ28's
hi, i'm trying to find out the stock sizes on these modles..... i recently measured the ones on my 88 formula......disappointment :-( 28 up front and 17mm in rear. Mainly my purpose is to just go to a junk yard and find one of these modles to get the sway bars off it.
05-06-2008, 11:08 PM
#2
Member
Join Date: May 2007
Location: K.C.MO
Posts: 154
Likes: 0
Received 1 Like
on
1 Post
Car: 88 Formula
Engine: LB9
Transmission: T5
Axle/Gears: 3.45
Re: sway bars sizes for GTA's or I-rocZ28's
36mm front, 23mm rear. Your car should have come with those. Check your SPID label for a W66 code(Formula), also WS6 and FE2(big sway bars ect.). 34mm front bars are easier to find and would still be a huge improvement or what you have now.
05-07-2008, 12:08 AM
#3
Member
Thread Starter
Join Date: Jun 2007
Location: Monterey Park,Ca
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Firebird Formula WS6
Engine: LO3 305 tbi
Transmission: 700 R4
Axle/Gears: 3gen housing zexel torsen posi 3.42
Re: sway bars sizes for GTA's or I-rocZ28's
maybe i measured it wrong i use a dial caliper. is there a specific spot on the sway bar i should measure? or do you recomend another way to measure it
05-07-2008, 12:20 AM
#4
Member
Join Date: May 2007
Location: K.C.MO
Posts: 154
Likes: 0
Received 1 Like
on
1 Post
Car: 88 Formula
Engine: LB9
Transmission: T5
Axle/Gears: 3.45
Re: sway bars sizes for GTA's or I-rocZ28's
Just measure anywhere on one of the straight areas. If you're converting from inches 36mm=1.417", 23mm=.906"
05-07-2008, 05:26 AM
#5
Re: sway bars sizes for GTA's or I-rocZ28's
The following link may provide some helpful info:
https://www.thirdgen.org/forums/faq-...-sway-bar.html
JamesC
https://www.thirdgen.org/forums/faq-...-sway-bar.html
JamesC
05-07-2008, 08:46 PM
#7
Re: sway bars sizes for GTA's or I-rocZ28's
Must have been swapped in. Like my 85 IROC, you probably originally had the 34mm/24mm combo. The hollow 36/solid 24 can be found on some Camaros from 89-92 and some thirdgen Pontiacs from 86-92.
JamesC
JamesC
Last edited by JamesC; 05-07-2008 at 08:49 PM.
Thread
Thread Starter
Forum
Replies
Last Post
ProtoMaster22
Engine/Drivetrain/Suspension Parts for Sale
1
08-26-2015 07:50 AM