My brakes suck, need help
#1
My brakes suck, need help
Now that my car has a bit more power than stock, I feel its long overdue for some better brakes. I already have some Performance Friction pads on that did squat for my braking. It has horrible fade (100+ stops are scary) and requires too much pedal effort.
I do not want to upgrade to rear discs because its way overrated and too expensive for almost no gain. However, I want to focus up front and I am looking to replace my stock brake lines with braided hoses, flush my brake fluid, install cooling ducts and replace the pads, but I want better rotors. I have 15" wheels and need a decent set of drilled or slotted rotors for a decent price. The only problem is that I dont know who makes what. All help is appreciated.
------------------
1985 Z28, Jasper Class 1 350, Edelbrock Performer intake, Dual snorkel air cleaner, K&N, Edelbrock headers, Catco 3" cat, Hooker 3" cat-back, Richmond 3.73's, built 700r4 w/Darrell Young 2400 stall TC, JET Stage 2 chip, Hypertech coil, Lakewood LCA's, Powertrax locker, SSM subframes, Centerline Auto Drag's
[This message has been edited by Marc 85Z28 (edited August 12, 2001).]
I do not want to upgrade to rear discs because its way overrated and too expensive for almost no gain. However, I want to focus up front and I am looking to replace my stock brake lines with braided hoses, flush my brake fluid, install cooling ducts and replace the pads, but I want better rotors. I have 15" wheels and need a decent set of drilled or slotted rotors for a decent price. The only problem is that I dont know who makes what. All help is appreciated.
------------------
1985 Z28, Jasper Class 1 350, Edelbrock Performer intake, Dual snorkel air cleaner, K&N, Edelbrock headers, Catco 3" cat, Hooker 3" cat-back, Richmond 3.73's, built 700r4 w/Darrell Young 2400 stall TC, JET Stage 2 chip, Hypertech coil, Lakewood LCA's, Powertrax locker, SSM subframes, Centerline Auto Drag's
[This message has been edited by Marc 85Z28 (edited August 12, 2001).]
#2
Senior Member
Join Date: Mar 2001
Location: Randleman,NC,USA
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro RS Convertible
Engine: 385ci LT1 cnc ported heads big cam
Transmission: 4L60E automatic
Axle/Gears: 3.42 Zexel posi 7.5" rear
Try http://www.stainlesssteelbrakes.com/ They have some nice kits.
------------------
91 Camaro RS 5.0L Black Convertible 700R4
** Added so far **
*GM Wonderbar,Alston SFC's,spohn LCA's and Panhard rod
*Turbo City Inj Spacer
*Dual Snorkel Air Filter
*March Performance Pulleys
*GM 3.42 Gears with OEM Zexel POSI
*Edelbrock headers
*3" High Flow Cat
*3" Dynomax Exhaust
*Walbro 255 lph Fuel Pump
***Future 330hp Vortec Crate with LT4 hotcam and 454 TBI
------------------
91 Camaro RS 5.0L Black Convertible 700R4
** Added so far **
*GM Wonderbar,Alston SFC's,spohn LCA's and Panhard rod
*Turbo City Inj Spacer
*Dual Snorkel Air Filter
*March Performance Pulleys
*GM 3.42 Gears with OEM Zexel POSI
*Edelbrock headers
*3" High Flow Cat
*3" Dynomax Exhaust
*Walbro 255 lph Fuel Pump
***Future 330hp Vortec Crate with LT4 hotcam and 454 TBI
Thread
Thread Starter
Forum
Replies
Last Post
dbrochard
Engine/Drivetrain/Suspension Parts for Sale
6
09-19-2015 08:13 PM