MrsLottaBallsCamaro

I have a 91 305 RS, and I want to get a posi rear end for my car. I have a chance to buy a posi 3.73 from a thirdgen firebird, but I wanted to make sure that it will work.

------------------
G-d bless the USA!

For all those flag-burning-sons-of-bitches: just remember who's over in Afghanistan protecting your right to do such stupid sh-t.

iroc5speed

it will bolt up, I have a fourth gen and it bolted up. The only thing that I think could be a problem is if you have an auto(I don't know what you have)the gears may be too steep.

------------------
'86 IROC 5-speed
305 LG4
edelbrock performer rpm intake
edelbrock 600 cfm carb
msd pro billet hei distributer
'95 3.23 rearend
hotchkis rear suspension
PST front polygraphite suspension
"speed kills. buy a f@&d, live forever."

TomP

Nice axle! Make sure you replace the brake hoses on it with new stuff. While you've got it on the ground, you might want to throw in some new axleshaft bearings & seals (commonly misnamed as "rear wheel bearings & seals"). I put a 3.73/posi/disc rear axle from an '84 Trans Am under my '86 Firebird, and it bolted right up. The hardest part was bleeding the brakes afterwards.



------------------
-Tom P (Hot rodded 1986 Firebird 2.8l)