1992 Upper Ball joints
#1
1992 Upper Ball joints
Hi:
I am having hard time finding options for stock replacement the upper ball joints. There are many options for the lower ones. Even rock auto has part number for one upper ball joint from a manufacturer that I have never heard of. Any input would be appreciated.
Thanks
I am having hard time finding options for stock replacement the upper ball joints. There are many options for the lower ones. Even rock auto has part number for one upper ball joint from a manufacturer that I have never heard of. Any input would be appreciated.
Thanks
The following users liked this post:
punkmaster98 (05-13-2024)
#3
Re: 1992 Upper Ball joints
Good to know!
This is my first 3rd gen. I guess I should have taken the wheels off. I am done with engine and tranny swap and I wanted to get the front end firmed up since it feels very loose. So, besides all other stuff (ties rods and end links,...) is there anything else should be replaced?
Thanks
This is my first 3rd gen. I guess I should have taken the wheels off. I am done with engine and tranny swap and I wanted to get the front end firmed up since it feels very loose. So, besides all other stuff (ties rods and end links,...) is there anything else should be replaced?
Thanks
#4
Junior Member
Re: 1992 Upper Ball joints
Good to know!
This is my first 3rd gen. I guess I should have taken the wheels off. I am done with engine and tranny swap and I wanted to get the front end firmed up since it feels very loose. So, besides all other stuff (ties rods and end links,...) is there anything else should be replaced?
Thanks
This is my first 3rd gen. I guess I should have taken the wheels off. I am done with engine and tranny swap and I wanted to get the front end firmed up since it feels very loose. So, besides all other stuff (ties rods and end links,...) is there anything else should be replaced?
Thanks
https://partshawk.com/moog-k6414-sus...rut-mount.html
#6
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,745
Received 800 Likes
on
531 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: 1992 Upper Ball joints
I would check every steering component 1st before just replacing good parts with china replacements. Look at the idler arm if it's still original, they go bad in 10k miles or less sometimes.
The following users liked this post:
PAformula (05-14-2024)
Thread
Thread Starter
Forum
Replies
Last Post