TBIThrottle Body Injection discussion and questions. L03/CFI tech and other performance enhancements.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
__________________ Teal green 91 RS
5.0 TBI with Auto trans
Z-28 wheels, SS hood, Z28 hi rise spoiler
ENGINE-stock 305 bottom end,Vortec heads 062s milled .030,Proform 1.6 roller rockers, lt1 cam,vortec TBI marine intake, Holley 670 with 305 injector pod w/ AFPR Caprice Police oil Cooler
ECM- chip with EGR & Speed limiter removed, still in need of some tunning
EXAUST-Headman coated LTs, true duals with X-pipe and 2 Bullet mufflers
IGNINTION -Accel wires,coil,cap and rotor, MSD 6AL with ADJ timing control box
TRANS-rebuilt trany w/shift kit,vette servo, SLP stall and trans cooler
Drivetrain-SLP zexel posi w/3.42 aluminum drive shaft, Billet adj. control arms and panhard bar
POWER ADDER- NOS TBI plate system with purge valve and bottle heater
12.839 @ 106.592
1.795 60'
That's Great!!
Let us know how the install goes. Do you have any time slips of your car now? Might be nice to know how much of a difference the intake and TBI unit make.
__________________ --1991 Teal RS
Flaking paint, 160 something thousand miles
Open element air cleaner
KYB shocks/struts
3" Catback Ultimate TBI modded
3.42 posi rear out of a V6 donor car
The adapter plate came with the Holley TBI that I bought on thirdgen classifieds. I had to polish the adapter plate to match the intake . I duno if it will fit on that intake but I think it should. I had planed to put the intake with vortec heads and TBI on the 305 but then I decided that would be a waste of time and gaskets. So im gona start to build my monster 350 TBI on the side. Im gona start from the top with that intake and vortec heads with a 350 roller block with 4 bolt mains and finish it off with an lt-4 hotcam with custom prom.
__________________ Teal green 91 RS
5.0 TBI with Auto trans
Z-28 wheels, SS hood, Z28 hi rise spoiler
ENGINE-stock 305 bottom end,Vortec heads 062s milled .030,Proform 1.6 roller rockers, lt1 cam,vortec TBI marine intake, Holley 670 with 305 injector pod w/ AFPR Caprice Police oil Cooler
ECM- chip with EGR & Speed limiter removed, still in need of some tunning
EXAUST-Headman coated LTs, true duals with X-pipe and 2 Bullet mufflers
IGNINTION -Accel wires,coil,cap and rotor, MSD 6AL with ADJ timing control box
TRANS-rebuilt trany w/shift kit,vette servo, SLP stall and trans cooler
Drivetrain-SLP zexel posi w/3.42 aluminum drive shaft, Billet adj. control arms and panhard bar
POWER ADDER- NOS TBI plate system with purge valve and bottle heater
12.839 @ 106.592
1.795 60'
Ultimate TBI modded
. I duno if it will fit on that intake but I think it should. I had planed to put the intake with vortec heads and TBI on the 305 but then I decided that would be a waste of time and gaskets. So im gona start to build my monster 350 TBI on the side. Im gona start from the top with that intake and vortec heads with a 350 roller block with 4 bolt mains and finish it off with an lt-4 hotcam with custom prom. 
