Round or square exhaust ports?
05-13-2002, 11:56 PM
#1
Member
Thread Starter
Join Date: Nov 2001
Location: Martinsburg, WV, USA
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Iroc
Engine: 305 TPI
Transmission: 700r4
Round or square exhaust ports?
I Have an 86 Iroc with a 305 TPI moter in it? can anyone tell my if my Exhaust ports are round or square. Im gettin a set or headers and want to order the copper exhaust gaskets for it but don't want to pull the manifolds till i get the parts here and rdy to put on....thanks
05-14-2002, 12:56 AM
#2
Member
Join Date: May 2001
Location: Valley, AL
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
The flanges on the header dictates which header gasket you use. Most street headers have round port flanges, and usually 1 3/4 or bigger race headers use the square port flanges.
05-14-2002, 01:10 AM
#5
Member
Join Date: May 2001
Location: Valley, AL
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Yes,The exhaust ports on most all small blocks are square, but when you have headers that have round ports in the flange that bolts to head, you use round port gaskets. If you don't, you WILL have a terrible exhaust leak very quickly.
05-14-2002, 01:15 AM
#6
Supreme Member
Join Date: Jul 2001
Location: Paris, Tx. USA
Posts: 1,408
Likes: 0
Received 1 Like
on
1 Post
Car: 89 RS
Engine: LS1
Transmission: TH350
Exactly, If you ordered the headers for a specific application, like an 86 IROC with the LB9 305 TPI, then I bet he got square port headers, to match the heads.
05-14-2002, 01:48 AM
#7
Member
Join Date: May 2001
Location: Valley, AL
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Maybe, but the header flanges on both of my cars have round ports, so don't you think it may be a good idea to see what the headers actually have than to go ahead and buy square port gaskets, and then maybe have to send them back or get a refund on them?? He didn't specify what header he was going with, and if he goes with Hedman or Hooker, chances are he is going to end up with round port flanges, so why take the chance until he has the new headers??
Trending Topics
05-14-2002, 01:52 AM
#8
Supreme Member
Join Date: Jul 2001
Location: Paris, Tx. USA
Posts: 1,408
Likes: 0
Received 1 Like
on
1 Post
Car: 89 RS
Engine: LS1
Transmission: TH350
Well Wolfpack, what headers are you getting?
If it were me, I'd wait till I got the headers and get the correct gasket at the local parts store. Buying the gaskets off of the net is a waste, shipping a set of $7.00 gaskets is not worth it to me.
If it were me, I'd wait till I got the headers and get the correct gasket at the local parts store. Buying the gaskets off of the net is a waste, shipping a set of $7.00 gaskets is not worth it to me.
Last edited by StngKlr; 05-14-2002 at 01:57 AM.
05-14-2002, 04:05 PM
#9
Member
Thread Starter
Join Date: Nov 2001
Location: Martinsburg, WV, USA
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Iroc
Engine: 305 TPI
Transmission: 700r4
Well im goin with the Headman headers and i've been reading that the gaskets they send with the kit are junk(seems like all standard header gaskets are) so i was wanting to go with the copper or Alum ones so i don't have to worry bout it a couple of months from now...thanks again
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
