Which Lt1 cam to use?
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Williamsburg, VA
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Z28
Engine: 350 L98
Transmission: 700R4
Axle/Gears: G92 - 3.23
Which Lt1 cam to use?
I'm building a l98 350 with stock Iroc heads and about 9.7:1 compression. I want to use an Lt1 cam and I want to know which year cam is best for my combination. I have a 700r4 and will be running 3.27 gears.
94-95 LT1: Duration 203/208 Lift 450/460 Lobe sep 116
96-97 LT1: Duration 205/207 Lift 447/459 Lobe sep 117
As you can see there are almost the same except for the lobe sep.
Here is the stock L98 cam specs:
Duration 202/206 Lift 403/415 Lobe sep 115
Basically the Lt1 cams have more lift and a few more degrees of lobe seperation. What will that do for my engine?
Thanks, Mike Jones
94-95 LT1: Duration 203/208 Lift 450/460 Lobe sep 116
96-97 LT1: Duration 205/207 Lift 447/459 Lobe sep 117
As you can see there are almost the same except for the lobe sep.
Here is the stock L98 cam specs:
Duration 202/206 Lift 403/415 Lobe sep 115
Basically the Lt1 cams have more lift and a few more degrees of lobe seperation. What will that do for my engine?
Thanks, Mike Jones
Thread
Thread Starter
Forum
Replies
Last Post
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
2
09-28-2015 12:35 AM