torq specs on rr's
05-04-2003, 06:58 PM
#2
Supreme Member
Join Date: Jul 1999
Location: Vereinigten Staaten
Posts: 2,767
Likes: 0
Received 2 Likes
on
2 Posts
Car: Take
Engine: Your
Transmission: Pick
Unless your talking about a 3800 Series II V6, or a 3100/3400 engine, there is NO torque spec for the roller rockers. There is, however, a lash procedure for tightening them that you will need to follow.
05-06-2003, 03:42 PM
#4
Supreme Member
Join Date: Sep 1999
Location: Manassas VA
Posts: 3,197
Likes: 0
Received 6 Likes
on
5 Posts
Car: 04 GTO
Engine: LS1
Transmission: M12 T56
Originally posted by f0rmula350
and that is
and that is
BTW, setting lash on a SBC has been covered numerous times in the past, a search might be a good idea. Always is when the procedure takes longer to describe then it does to complete.
05-06-2003, 04:25 PM
#5
Member
Join Date: Apr 2002
Location: CT
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: '86 Camaro
Engine: LG4
Transmission: T5
spin the pushrod with your finger, tighten the rocker down until the pushrod doesn't spin easily anymore, then 1/2 turn more for each rocker.
Also, make sure the valve is closed on the rocker you're adjusting or you'll have to do it again. Easiest(for me at least) to do each cylinder's rockers at TDC just to be sure the valves are closed.
-Matt
Also, make sure the valve is closed on the rocker you're adjusting or you'll have to do it again. Easiest(for me at least) to do each cylinder's rockers at TDC just to be sure the valves are closed.
-Matt
Thread
Thread Starter
Forum
Replies
Last Post
