where is the speedo buffer box?!
08-06-2004, 01:11 PM
#1
Supreme Member
Thread Starter
Join Date: Jun 2001
Location: Charleston, SC
Posts: 9,550
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
where is the speedo buffer box?!
where is the speedo buffer box in a 91 camaro?
does anyone have a pinout for it?
specificly, i intend to try somthing suggested by another member.
im going to take the "to speedo" wire and connect it to the same pin as the "to cruise control" wire.
the cruise control works of half the PPM (pulses per mile) of the speedo.
this SHOULD effectively make my speedo read half of my actual speed.
i'll then swap gauge faces from a 110 speedo to a 220 speedo.
does anyone have a pinout for it?
specificly, i intend to try somthing suggested by another member.
im going to take the "to speedo" wire and connect it to the same pin as the "to cruise control" wire.
the cruise control works of half the PPM (pulses per mile) of the speedo.
this SHOULD effectively make my speedo read half of my actual speed.
i'll then swap gauge faces from a 110 speedo to a 220 speedo.
08-06-2004, 01:43 PM
#2
TGO Supporter
Join Date: Sep 2003
Location: conway, s.c.
Posts: 6,127
Likes: 0
Received 8 Likes
on
8 Posts
Car: 1989 Iroc-Z
Engine: 5.7L TPI
Transmission: 700R4
Hello MrDude_1,
While I don't have the manual for the 91 at the moment, I do have the manual for the 92 camaro. In the 92 models, the only engine that had the VSS buffer box was the 305 TBI and it was located under the dash next to the ECM. The other engines operated off the VSS on the transmission which was a two wire affair going to the ECM.
While I don't have the manual for the 91 at the moment, I do have the manual for the 92 camaro. In the 92 models, the only engine that had the VSS buffer box was the 305 TBI and it was located under the dash next to the ECM. The other engines operated off the VSS on the transmission which was a two wire affair going to the ECM.
08-06-2004, 01:44 PM
#3
Supreme Member
Thread Starter
Join Date: Jun 2001
Location: Charleston, SC
Posts: 9,550
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
Originally posted by Trickster
Hello MrDude_1,
While I don't have the manual for the 91 at the moment, I do have the manual for the 92 camaro. In the 92 models, the only engine that had the VSS buffer box was the 305 TBI and it was located under the dash next to the ECM. The other engines operated off the VSS on the transmission which was a two wire affair going to the ECM.
Hello MrDude_1,
While I don't have the manual for the 91 at the moment, I do have the manual for the 92 camaro. In the 92 models, the only engine that had the VSS buffer box was the 305 TBI and it was located under the dash next to the ECM. The other engines operated off the VSS on the transmission which was a two wire affair going to the ECM.
so its a yellow box next to the ECM...
by any chance can you tell me the wiring pinout/colors going to it?
08-06-2004, 02:26 PM
#5
Supreme Member
Thread Starter
Join Date: Jun 2001
Location: Charleston, SC
Posts: 9,550
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
PERFECT!
thanks Trickster!
ps: why dont you add "The Trickster!" to the end of every post anymore?
The Dudester
thanks Trickster!
ps: why dont you add "The Trickster!" to the end of every post anymore?
The Dudester
07-14-2005, 04:12 PM
#7
Member
Join Date: Jan 2002
Location: In a pineapple under the sea
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Car: `91 rs
Engine: 352 TPI
Transmission: TH700 R4
Hey Trickster, is there a way to wire it to remove the buffer box completely? I switched from 305 tbi to 352 tpi w/7730 ecm.
Thread
Thread Starter
Forum
Replies
Last Post
