ok guys help make a decision
#1
Senior Member
Thread Starter
Join Date: May 2002
Location: concord New Hampshire
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 iroc and 88 k2500 tbi truck
Engine: l98 and lo5
Transmission: 700 r4's babby
ok guys help make a decision
i have 2 plans for my 87 iroc i just dont know what one i want to go with.
the first one is
383 strockere with h beam rods 4130 crank 210 afr heads , a holley stelth ram and a cam to mach. this would be bolted up to my 700r4 and a dfi gen 7
the second plan is a ls1 swap with a cam in the 220 -228 dur rang and this would pbly be bolted up to a 4l60e. i would be using the hawks k member and motor mounts.
the first one is
383 strockere with h beam rods 4130 crank 210 afr heads , a holley stelth ram and a cam to mach. this would be bolted up to my 700r4 and a dfi gen 7
the second plan is a ls1 swap with a cam in the 220 -228 dur rang and this would pbly be bolted up to a 4l60e. i would be using the hawks k member and motor mounts.
#2
Supreme Member
Join Date: Sep 2003
Location: Fallbrook, CA
Posts: 1,281
Likes: 0
Received 0 Likes
on
0 Posts
that all depends on how much hassle and hp you want... both those combos would make a decent horsepower. but i know with the LS1 swap you would need to change a lot more stuff including the wiring harness...
#3
Senior Member
Thread Starter
Join Date: May 2002
Location: concord New Hampshire
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 iroc and 88 k2500 tbi truck
Engine: l98 and lo5
Transmission: 700 r4's babby
i have to change all my wireing as it is it looks like a 10 year old on meth put it in and the extra work dose not bothere me i just want a car that when it is all done i can drive and be happy with and once in a while take to the track and eat some **** and maybe a pony or two
#4
Senior Member
Thread Starter
Join Date: May 2002
Location: concord New Hampshire
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 iroc and 88 k2500 tbi truck
Engine: l98 and lo5
Transmission: 700 r4's babby
ok my dad said that oopinions are like a$$ holes every one has one he must have been wrong. i am not looking for some one to help me just tell me what they would have in there car if it it magicly appeard in there one day. and yess i know my spelling sucks
#5
Supreme Member
Join Date: Sep 2003
Location: Fallbrook, CA
Posts: 1,281
Likes: 0
Received 0 Likes
on
0 Posts
if i had an infinite budget and those were my only two options, i would go with the 383 because there are more aftermarket parts and more easily modded... you can get 383's to make over 400hp and still be streetable for a reasonable cost
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
Suspension and Chassis
1
08-09-2015 04:32 PM