Tech / General EngineIs your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
14573638 is the casting.. I can't find any info on that casting??
please help?
will this engine work in my camaro because it might be flat tappet engine?
------------------
92 z-28 G92 black with white racing stripes.
Dynomax cat back
Ram air
305 5 speed, underdrive pulleys and TB by pass
http://www.thirdgen.org/rides/rideimages/92_Z.jpg
I can't runn the casting no. for you but if the intake is off or you can take the valve covers off you can shine a flash light down in to the lifter valley and see the lifter retainers then you will know for shure if the engine is a roller or not. Also what did the engine come out of?
I looked at mortec aswell and couldn't find anything..hmmm
he is saying it came out of a 87 IROC so it must be a roller engine right?
------------------
92 z-28 G92 black with white racing stripes.
Dynomax cat back
Ram air
305 5 speed, underdrive pulleys and TB by pass
http://www.thirdgen.org/rides/rideimages/92_Z.jpg
You say 1457 3638. I don't see numbers beyond the 1410's. Highly unlikely but for what it's worth I did find 1409 3638 which is described as: 87-92, 350 CID, 2 or 4 Bolt,
Roller or Flat Tappet, 1-piece rear main seal.
