Can't tell where a leak is coming from....
#1
Junior Member
Thread Starter
Join Date: Oct 2005
Location: TEXAS
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Iroc
Engine: 5.7 TPI
Transmission: Automatic
Can't tell where a leak is coming from....
I have instant leaking the minute i add water or coolant to the radiator is looks like it coming from the water pump...but i checked the gaskets and all that but i don't know. Any ideas?
#2
Member
Join Date: Jul 2005
Location: Manchester: UK
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
Car: Was 3rd Gen now MustangGT
Engine: 302
Transmission: Auto
Axle/Gears: 3:73:1
Probably the pump bearing\seal, get a mirror and check the hole under the pump, thats usually where it leaks from, if its not the gasket at the back or the pump gaskets themselves.
#3
Senior Member
Join Date: May 2005
Location: Windsor Ontario Canada
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 jaguar xjs convertable
Engine: 89 L98 5.7 TPI
Transmission: 700R4
Axle/Gears: 3.23 dana 44
Is it leaking down onto the lower pulley? Probably the seal/bearing in the nose. There is a hole there onthe underside behind the top pulley. Its probably coming out there.
#4
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,177
Received 1,704 Likes
on
1,296 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
looks like it coming from the water pump
I detect a faint hint that there's some history here..... like maybe some work has been done? Installing a water pump maybe? If so, did you put sealer on the bolt threads, particularly the lower one on the driver's side? The other 3 holes are usually blind, but that one is drilled through all the way to the water jacket, and will leak around the threads if they're not sealed.
If not, you need a new WP. Don't forget to put sealer on the bolt threads when you replace it.
Thread
Thread Starter
Forum
Replies
Last Post