Bent Runner
#1
Junior Member
Thread Starter
Join Date: Feb 2006
Location: NJ
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 GTA, 97 Formula
Engine: 350 TPI, 350 LT1
Transmission: T5, A4
Axle/Gears: 9 bolt 3.45, 3.42
Bent Runner
My Driverside Rear TPI runner is almost all the way dented in. I was just wondering if that is causing 1 cylinder only to run way to rich. I experience sort of a "bog" up top, but the car still has great loew end torque.
#2
The left rear runner serves the #8 cylinder. Since the O² sensor is located in the exhaust on the left cylinder bank, mixture problems on the right bank won't affect overall mixture control. If #1 is rich, look into the injector for that cylinder.
The "bog" at higher RPM could be related to poor air flow at #8, however. Have a photo of the damage?
The "bog" at higher RPM could be related to poor air flow at #8, however. Have a photo of the damage?
Thread
Thread Starter
Forum
Replies
Last Post
Royal_Z
Engine/Drivetrain/Suspension Parts for Sale
4
09-30-2015 08:45 PM