Cam/head/rocker combo question.
#1
Member
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Deming, NM
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 camaro z28
Engine: 350 Carb
Transmission: Built 700 R4
Axle/Gears: 3.73
Cam/head/rocker combo question.
I want to know what is the best head/cam/rocker combo for my setup.
let me know if i need to upgrade anythign, this is what i currently have.
350ci
edelbrock performer rpm intake manifold
hedman headers
exhaust
600 cfm edelbrock carb w/ half inch spacer (May have to upgrade to 750 holley)
2800 stall convertor
3.73 gears
built 700r4
car does not run off the computer.
i am looking at brodix ik220 (I think that what it was) and the arp heads. now i just dont know what is a good combination for Good horsepower gains and realibility (Since it will be street car as well.
thanks in advance
let me know if i need to upgrade anythign, this is what i currently have.
350ci
edelbrock performer rpm intake manifold
hedman headers
exhaust
600 cfm edelbrock carb w/ half inch spacer (May have to upgrade to 750 holley)
2800 stall convertor
3.73 gears
built 700r4
car does not run off the computer.
i am looking at brodix ik220 (I think that what it was) and the arp heads. now i just dont know what is a good combination for Good horsepower gains and realibility (Since it will be street car as well.
thanks in advance
#2
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,157
Received 1,696 Likes
on
1,289 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Cam/head/rocker combo question.
Those heads are MONDO HUGE for a 350 on the street.
Best street results are obtained with something between 170 and 200 cc intake ports.
A known good cheeeep eeeezy combo is the upgraded Vortec heads (such as from SDPC), Comp XE274 cam, and Performer RPM manifold. You WILL need a 750 CFM carb, preferably a Holley DP. 1.5 roller rockers would be fine, preferably steel (Comp or Crower, NOT the cheeep chinese knock-off junk you see on eBay, like CAT).
Best street results are obtained with something between 170 and 200 cc intake ports.
A known good cheeeep eeeezy combo is the upgraded Vortec heads (such as from SDPC), Comp XE274 cam, and Performer RPM manifold. You WILL need a 750 CFM carb, preferably a Holley DP. 1.5 roller rockers would be fine, preferably steel (Comp or Crower, NOT the cheeep chinese knock-off junk you see on eBay, like CAT).
Thread
Thread Starter
Forum
Replies
Last Post
ZZ3Astro
Power Adders
1045
08-13-2019 12:57 AM
roysatikas
Transmissions and Drivetrain
0
09-22-2015 08:15 PM