Intake Manifold gap?
#1
Member
Thread Starter
iTrader: (2)
Join Date: Sep 2006
Location: Oklahoma
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 T/A
Engine: 5.7l 355
Transmission: 4L60
Axle/Gears: 3.42
Intake Manifold gap?
I'm currently building my engine and ready to install the intake (HSR). I taped the manifold gaskets in place and layed the intake in place to make sure there were no fittment issues. The bolt holes all line up, but I'm worried about the gap at the china wall. It's supposed to be between .060 and 0.120 but mine is around 0.148. Is this gonna be a problem and if not whats the best way to seal it when the gap is that large? Thanks for the help.
#3
Member
iTrader: (2)
Join Date: Apr 2007
Location: Olathe, KS
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro Z28
Engine: 357 SBC
Transmission: 700R4
Axle/Gears: 3.73
Re: Intake Manifold gap?
Don't want to highjack but I just pulled mine and placed new gaskests on and did RTV on the China walls with the rubber selant and more RTV not alot but enough to keep it on. Should I see the Blue Gaskets along the head.
Also in reading I found that I had to put RTV around the intake ports. If I didn't do this will it hurt the install.
Also in reading I found that I had to put RTV around the intake ports. If I didn't do this will it hurt the install.
Last edited by OS3Fleming; 05-01-2009 at 01:25 AM. Reason: added info
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
86CamaroDan
Engine/Drivetrain/Suspension Parts for Sale
2
09-29-2015 10:08 PM