Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!

no start problem

Thread Tools
 
Search this Thread
 
Old 11-08-2008, 12:42 AM
  #1  
Junior Member

Thread Starter
iTrader: (1)
 
jliroc's Avatar
 
Join Date: Jun 2003
Location: Austin, Texas
Posts: 55
Received 0 Likes on 0 Posts
Car: 1990 IROC Convertible
Engine: 5.7 TPI, L98 Heads w/roller rockers
Transmission: T-5
no start problem

Hey guys, I just picked up a 90 IROC convert and am having a starting problem. Coil, cap, rotor, wires, plugs, ignition module, distributor pick up coil, all have been replaced. Also replaced fuel filter and current fuel pressure is 40-50 psi at key up. Vehicle runs ok at cold start, as soon as it warms up it loses power and throttle response but still idles, shut down car, restart and no fire. Timing is set to 6 btdc. 5.0l tpi with a 5 speed thanks guys!!
Old 11-08-2008, 01:10 AM
  #2  
Moderator

iTrader: (14)
 
five7kid's Avatar
 
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes on 34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Welcome aboard thirdgen.org.

What's the fuel pressure when it starts acting up?
Old 11-08-2008, 01:39 AM
  #3  
Junior Member

Thread Starter
iTrader: (1)
 
jliroc's Avatar
 
Join Date: Jun 2003
Location: Austin, Texas
Posts: 55
Received 0 Likes on 0 Posts
Car: 1990 IROC Convertible
Engine: 5.7 TPI, L98 Heads w/roller rockers
Transmission: T-5
Re: no start problem

it's between 40 and 50 right now and it just cranks no fire
Old 11-08-2008, 01:13 PM
  #4  
Moderator

iTrader: (14)
 
five7kid's Avatar
 
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes on 34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Go for the basics: Do you have spark, are the injectors firing, will it start if you spray staring fluid or gasoline into the intake while cranking, have you checked the computer for error codes, etc.

When did the problem begin, before or after you replaced all those parts?
Old 11-16-2008, 02:04 PM
  #5  
Junior Member

Thread Starter
iTrader: (1)
 
jliroc's Avatar
 
Join Date: Jun 2003
Location: Austin, Texas
Posts: 55
Received 0 Likes on 0 Posts
Car: 1990 IROC Convertible
Engine: 5.7 TPI, L98 Heads w/roller rockers
Transmission: T-5
Re: no start problem

the problem occured before the parts were replaced. I replaced these parts attempting to solve the issue. Also replaced the coil. Vehicle will attempt to stutter when carb cleaner is sprayed in the throttle body, no trouble codes in the computer. All injectors are firing.
Old 01-23-2009, 11:31 AM
  #6  
Junior Member

Thread Starter
iTrader: (1)
 
jliroc's Avatar
 
Join Date: Jun 2003
Location: Austin, Texas
Posts: 55
Received 0 Likes on 0 Posts
Car: 1990 IROC Convertible
Engine: 5.7 TPI, L98 Heads w/roller rockers
Transmission: T-5
Re: no start problem

Bad fuel injectors - resistance bad on about 5 injectors, replaced with a new set of 8 and she runs great! Thanks guys!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
92camaroJoe
TBI
32
07-29-2023 07:57 PM
Infested
Tech / General Engine
3
05-22-2018 11:56 PM
Orr89RocZ
Power Adders
206
04-25-2016 08:28 AM
92camaroJoe
Tech / General Engine
6
08-13-2015 06:07 AM
mustangman65_79
Tech / General Engine
4
08-08-2015 12:07 PM



Quick Reply: no start problem



All times are GMT -5. The time now is 03:25 PM.