tpi 350 engine block component weights
#1
Member
Thread Starter
Join Date: Dec 2008
Location: So Pasadena, CA
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Corvette
Engine: 383 SuperRam 10.7 AFR 195 220/229
Transmission: Fancy Smansy 87 Corvette 700r4
Axle/Gears: 3.33
tpi 350 engine block component weights
how much does a block with main caps weigh?
stock crank?
rods and pistions?
all together can one person lift it into a trunk of a car?
or does it have to be taken apart?
is a stock crank, rods and pistons worth trying to sell?
thanks
stock crank?
rods and pistions?
all together can one person lift it into a trunk of a car?
or does it have to be taken apart?
is a stock crank, rods and pistons worth trying to sell?
thanks
#2
Junior Member
Join Date: May 2008
Location: Austin
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Car: '91 Camaro RS
Engine: 355 TPI, Comp 268xfi, bowtie heads
Transmission: 700r4
Re: tpi 350 engine block component weights
one person can carry a bare block, with rods pistons and crank it's going to be upwards of 250 pounds or so, so it's kind of iffy, depends on how strong you are
you could probably sell the crank if its in good shape, rods maybe, pistons are probably worthless unless they're oversize
you could probably sell the crank if its in good shape, rods maybe, pistons are probably worthless unless they're oversize
Thread
Thread Starter
Forum
Replies
Last Post
84z96L31vortec
Tech / General Engine
7
08-20-2017 12:16 AM
theshackle
Tech / General Engine
4
03-05-2017 06:37 PM