valve? in vacuum line to cc
02-02-2009, 06:15 PM
#1
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Sep 2008
Location: Western WA
Posts: 1,347
Likes: 0
Received 1 Like
on
1 Post
Car: 85 Camaro
Engine: No
Transmission: No
Axle/Gears: No
valve? in vacuum line to cc
What is the purpose of the small line that comes out of this valve, and where does it go, after it goes through the firewall? It's in the vacuum line to the cruise control.
Also, what is the large aluminum object, cylinder shaped, maybe 5" long x 1.5" in diameter, under the wiper motor?
Also, what is the large aluminum object, cylinder shaped, maybe 5" long x 1.5" in diameter, under the wiper motor?
Last edited by gregsz-28; 02-02-2009 at 06:19 PM.
02-02-2009, 10:35 PM
#2
Senior Member
iTrader: (1)
Join Date: Jul 2007
Location: MA
Posts: 1,141
Likes: 0
Received 2 Likes
on
2 Posts
Car: '87 IROC/'68 SS
Engine: 5.7L/350
Transmission: 700R4/Muncie 4-spd
Axle/Gears: 3.27 9 bolt / 3.31 12 bolt
Re: valve? in vacuum line to cc
I believe it's a check valve for your HVAC system. It keeps it from switching to defrost when the vacuum goes low.
02-03-2009, 01:05 AM
#3
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Sep 2008
Location: Western WA
Posts: 1,347
Likes: 0
Received 1 Like
on
1 Post
Car: 85 Camaro
Engine: No
Transmission: No
Axle/Gears: No
Re: valve? in vacuum line to cc
Thanks for the answer!
That seems logical... one check valve probably used for both CC and HVAC, since there is a vacuum resevoir on the same side of the valve as the hoses that go to CC and under my dash.
Now, about my second question...
That seems logical... one check valve probably used for both CC and HVAC, since there is a vacuum resevoir on the same side of the valve as the hoses that go to CC and under my dash.
Now, about my second question...
02-03-2009, 09:54 AM
#5
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Sep 2008
Location: Western WA
Posts: 1,347
Likes: 0
Received 1 Like
on
1 Post
Car: 85 Camaro
Engine: No
Transmission: No
Axle/Gears: No
Re: valve? in vacuum line to cc
Oh... I thought that what was above it was the wiper motor. Shows how much I know.
Thanks!
Also, what is the larger vacuum line (approx. .5" OD) that goes from the CC, through the firewall, on the drivers side, for?
Does it go to the brake pedal?
Thanks!
Also, what is the larger vacuum line (approx. .5" OD) that goes from the CC, through the firewall, on the drivers side, for?
Does it go to the brake pedal?
Last edited by gregsz-28; 02-03-2009 at 06:44 PM.
Thread
Thread Starter
Forum
Replies
Last Post
mdtoren
Tech / General Engine
0
08-16-2015 05:45 PM