Home Register FAQ Members List Photo Gallery Garage Search Today's Posts Mark Forums Read Vendors



Go Back   Third Generation F-Body Message Boards > Tech Boards > Tech / General Engine
Reload this Page swapping wireing harnesses
Sign in using an external account
Register Forgot Password?

Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!

Welcome to ThirdGen.org!
Welcome to ThirdGen.org.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!


Reply
 
Thread Tools Search this Thread
Old 10-07-2009, 01:27 PM   #1
Junior Member
 
Join Date: Oct 2009
Location: wisconsin
Posts: 18
Car: GMC 1500 P/U 4x4
Engine: 350
Transmission: 4L60E
Axle/Gears: 4:10

Classifieds Rating: (0)
Send a message via Yahoo to demonseed304
swapping wireing harnesses
I have a 93 gmc 1500 350 4x4 with a blown tbi unit.
Can i swap a Wiring harness from a 84 350 with a carberator and have it work with my 93?
demonseed304 is offline vBGarage Page   Reply With Quote
Old 10-07-2009, 01:29 PM   #2
Junior Member
 
Join Date: Oct 2009
Location: wisconsin
Posts: 18
Car: GMC 1500 P/U 4x4
Engine: 350
Transmission: 4L60E
Axle/Gears: 4:10

Classifieds Rating: (0)
Send a message via Yahoo to demonseed304
Re: swapping wireing harnesses
Quote:
Originally Posted by demonseed304 View Post
I have a 93 gmc 1500 350 4x4 with a blown tbi unit.
Can i swap a Wiring harness from a 84 350 with a carberator and have it work with my 93?
it is being a pain in the ***
demonseed304 is offline vBGarage Page   Reply With Quote
Old 10-07-2009, 08:48 PM   #3
Supreme Member
 
Join Date: Apr 2005
Location: Way out west, long way south
Posts: 3,450
Car: 1990 Vette
Engine: 383 SP EFI 4bbl TB
Transmission: T400
Axle/Gears: 4 Link Coilover 9" 4.11

Classifieds Rating: (13)
Re: swapping wireing harnesses
Quote:
Originally Posted by demonseed304 View Post
I have a 93 gmc 1500 350 4x4 with a blown tbi unit.
Can i swap a Wiring harness from a 84 350 with a carberator and have it work with my 93?
Sounds like a lot of work for nothing
Why do you need to swap the wiring if going to a carb?
Take TBI intake off , put carb intake on , put in reg HEI dist , run pink ign wire to dist , adj regulator for carb maybe.
You leave all the truck wiring\ computer in place to run the dash and prob the speedo.
vetteoz is offline vBGarage Page   Reply With Quote
Old 10-08-2009, 07:55 AM   #4
Junior Member
 
Join Date: Oct 2009
Location: wisconsin
Posts: 18
Car: GMC 1500 P/U 4x4
Engine: 350
Transmission: 4L60E
Axle/Gears: 4:10

Classifieds Rating: (0)
Send a message via Yahoo to demonseed304
Re: swapping wireing harnesses
My dist. has an ingniton control modual around the back that is computer controled partially. so how will that work out. It has three plugs in, one comming from the coil, one comming from the computer and one going to the distributor.
demonseed304 is offline vBGarage Page   Reply With Quote
Old 10-09-2009, 04:16 PM   #5
Junior Member
 
Join Date: Oct 2009
Location: wisconsin
Posts: 18
Car: GMC 1500 P/U 4x4
Engine: 350
Transmission: 4L60E
Axle/Gears: 4:10

Classifieds Rating: (0)
Send a message via Yahoo to demonseed304
Re: swapping wireing harnesses
Or would it be easier to connect a carberator with a manual choke
demonseed304 is offline vBGarage Page   Reply With Quote
Old 10-09-2009, 04:16 PM
ThirdGen
1992 Camaro




Paid Advertisement


Reply

Go Back   Third Generation F-Body Message Boards > Tech Boards > Tech / General Engine
Reload this Page swapping wireing harnesses
« please help me on rusty engine. | SBC torque specs »
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 

1982 Camaro '82 || 1983 Camaro '83 || 1984 Camaro '84 || 1985 Camaro '85 || 1986 Camaro '86 || 1987 Camaro '87 || 1988 Camaro '88 || 1989 Camaro '89 || 1990 Camaro '90 || 1991 Camaro '91 || 1992 Camaro '92


All times are GMT -5. The time now is 11:57 PM.

Contact Us - ThirdGen.Org - Advertising - Privacy Policy - Terms of Use - Jobs - Top

Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.5.2
All content copyright © 1997 - 2012 ThirdGen.org. All rights reserved. No part of this website may be reproduced without the expressed, documented, and written consent of ThirdGen.org's Administrators.

Emails & Contact Details