327 rocker question
#1
Junior Member
Thread Starter
Join Date: Nov 2009
Location: Palm Coast Fl.
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z
Engine: 5.0 305ci 4 barrel Edelbrock carb
Transmission: 700R4
Axle/Gears: 3.73
327 rocker question
I have an 87 Iroc with a 327 in it, i pulled the valve cover off the other day to clean for paint and noticed one of the rockers is not sitting square on the valve spring. Is this a big deal? I have never seen anything like that. What is the solution if it is a problem? Thanks for the help
#2
Senior Member
iTrader: (1)
Join Date: Jul 2007
Location: MA
Posts: 1,141
Likes: 0
Received 2 Likes
on
2 Posts
Car: '87 IROC/'68 SS
Engine: 5.7L/350
Transmission: 700R4/Muncie 4-spd
Axle/Gears: 3.27 9 bolt / 3.31 12 bolt
Re: 327 rocker question
I have an 87 Iroc with a 327 in it, i pulled the valve cover off the other day to clean for paint and noticed one of the rockers is not sitting square on the valve spring. Is this a big deal? I have never seen anything like that. What is the solution if it is a problem? Thanks for the help
#3
Junior Member
Thread Starter
Join Date: Nov 2009
Location: Palm Coast Fl.
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z
Engine: 5.0 305ci 4 barrel Edelbrock carb
Transmission: 700R4
Axle/Gears: 3.73
Re: 327 rocker question
What are the head casting numbers? I'd guess you have heads that need self-aligning rockers but have regular ones. Best not to leave it that way.
Thats the interesting part, the number is 14022601, i found it comes from either a 305 or a (267) which i doubt. After pulling the Passenger side valve cover off i found 1 Rocker on that side also not centered.
Thats the interesting part, the number is 14022601, i found it comes from either a 305 or a (267) which i doubt. After pulling the Passenger side valve cover off i found 1 Rocker on that side also not centered.
Last edited by kingzrt; 12-27-2009 at 11:59 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Mickeyruder
Engine/Drivetrain/Suspension Parts for Sale
3
09-02-2015 02:45 PM