Idle rpm help!
07-28-2010, 01:49 PM
#3
Supreme Member
Re: Idle rpm help!
Idle is computer controlled. It should be at 650 with all accessories off. If it is not correct, you will need to perform idle air control reset procedure. Warm up engine, turn off ignition, disconnect IAC, restart engine, adjust idle to 450 by turning base idle screw(may need to remove plug covering screw), reconnect IAC. If engine will not idle at 450, figure out why.
07-28-2010, 01:59 PM
#4
Junior Member
Thread Starter
Join Date: Jul 2010
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro z28
Engine: 5.0 TPI
Transmission: 5 Speed Manual t5
Re: Idle rpm help!
Idle is computer controlled. It should be at 650 with all accessories off. If it is not correct, you will need to perform idle air control reset procedure. Warm up engine, turn off ignition, disconnect IAC, restart engine, adjust idle to 450 by turning base idle screw(may need to remove plug covering screw), reconnect IAC. If engine will not idle at 450, figure out why.
!~! ima go do that now 
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM