steps for swapping a gas tank
07-19-2011, 12:27 PM
#1
Senior Member
Thread Starter
Join Date: Jul 2010
Location: SAN DIEGO, CALIFORNIA
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89RS-5.0/88IROC-Z-5.0/92-5.7 z28/v6
Engine: 5.0/5.7/2.8
Transmission: 5 spd in two stock auto in other tw
Axle/Gears: stock
steps for swapping a gas tank
i dont have much time to research all the steps if someone could break it down that would be awesome just drop the rear subrame or just the rear end>? and then the exhaust and driveline or what sorry for the messed up post i dont have time now as im late to class thanks
ANY ADVICE IS APPRECIATED
ANY ADVICE IS APPRECIATED
07-20-2011, 03:43 PM
#2
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
I've never seen a removable rear subframe in these cars.
Here are the steps I followed:
1) Take off what is in the way of the tank.
2) Take off what is connected to the tank.
3) Take off what holds the tank in the car.
I already had the exhaust off, and had taken out the rear end, so that probably helped.
If you need more details than that, you should probably get a shop manual.
Here are the steps I followed:
1) Take off what is in the way of the tank.
2) Take off what is connected to the tank.
3) Take off what holds the tank in the car.
I already had the exhaust off, and had taken out the rear end, so that probably helped.
If you need more details than that, you should probably get a shop manual.
Thread
Thread Starter
Forum
Replies
Last Post
AkDrifted
Engine/Drivetrain/Suspension Parts for Sale
6
08-17-2015 07:45 PM