engine and transmission questions
#1
Junior Member
Thread Starter
Join Date: Dec 2011
Location: sioux city iowa
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 formula
Engine: stock lo3 305
Transmission: 700r4
Axle/Gears: dont know
engine and transmission questions
I have a carbed lu5 305 hopefully i will be adding vortec heads soon and a manual trans.
so hears my questions
ive seen on here that you can actually use the yellow ls1 spring to get more lift from the heads, is this true.
and if so what would be a good cam for my application mostly street, not a daily driver.
also what manual transmission should i go with the t5 t56 t10 etc..
im new to some of this and anything will help
so hears my questions
ive seen on here that you can actually use the yellow ls1 spring to get more lift from the heads, is this true.
and if so what would be a good cam for my application mostly street, not a daily driver.
also what manual transmission should i go with the t5 t56 t10 etc..
im new to some of this and anything will help
#2
Senior Member
iTrader: (3)
Join Date: Aug 2008
Location: Memphis, TN
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 z28 Purple Haze
Engine: 5.7L Tuned Port Injection
Transmission: 700R4
Axle/Gears: 3.23 both spinning
Re: engine and transmission questions
My personal choice would be the T-56, as for the engine, not sure about that, but comp cams has a free program called camquest that you can download. It's what I used and will give you some good information so you can make the best choice for your application. Just go to their website to download it. http://www.compcams.com/
Thread
Thread Starter
Forum
Replies
Last Post