Any tips?
03-08-2012, 06:53 AM
#1
Member
Thread Starter
Join Date: Sep 2008
Location: Atlanta
Posts: 178
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 Z28
Engine: 305
Transmission: 5 speed
Axle/Gears: 3.42
Any tips?
Any tips or advice on what to do when changing the plugs and wires out on my 92 305 car? I looked last night and on the passenger side it looks real tight and it does not look any better on the driver side towards the firewall.
And what is the best plug to go into these cars. I think the car has bosch plugs in it now.
And what is the best plug to go into these cars. I think the car has bosch plugs in it now.
03-08-2012, 08:30 AM
#2
Senior Member
iTrader: (4)
Join Date: Feb 2012
Location: findlay,oh
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 camaro rs
Engine: twin turbo 406
Transmission: th400 w/brake 4400 stall
Axle/Gears: 3.42s
Re: Any tips?
i like to use ngk's or accel shortys. i would invest in a plug socket if you dont have one. it will make the job much easier. and be sure to put dielectric grease on the ends to get the boots on easier.
03-08-2012, 08:35 AM
#3
Junior Member
Join Date: May 2011
Location: Mesquite, Tx
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 firebird formula 5.0
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: 2:73
Re: Any tips?
x2 on the ngks.. they work the best... and its a lot easier to remove plugs from underneath.. i get the back 4 next to the firewall from underneath.. more room.
03-08-2012, 09:10 AM
#4
Senior Member
iTrader: (-1)
Join Date: Oct 2008
Location: Siloam Springs AR.
Posts: 809
Likes: 0
Received 1 Like
on
1 Post
Car: 1998 Trans/Am, 1989 RS Camaro
Engine: LS1, LQ9 6.0
Transmission: 4L60E, 4L60E
Axle/Gears: 2.73, 2.73
Re: Any tips?
ac delco's are the only way to go IMO, and yea get them from the bottom if you dont have headers.
Thread
Thread Starter
Forum
Replies
Last Post
Night rider327
Engine/Drivetrain/Suspension Parts for Sale
0
09-25-2015 04:47 AM
Andrew Prakash
TPI
2
09-08-2015 11:48 AM