Ignition Coil Replacement
07-16-2014, 03:44 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2013
Location: Portland, OR
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 IROC-Z
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 9 Bolt Borg-Warner/3.27
Ignition Coil Replacement
So, what's the trick for removing the mounting bracket from the coil? There's no screws just 2 pins that look like they are driven through the outer coil and bracket. The coil bracket screws into a lower bracket with 2 screws beside the distributor.
It's a 88 Camaro 5.7l
Any help would be appreciated. Thanks in advance.
It's a 88 Camaro 5.7l
Any help would be appreciated. Thanks in advance.
07-18-2014, 11:57 PM
#3
Junior Member
Thread Starter
Join Date: Dec 2013
Location: Portland, OR
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 IROC-Z
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 9 Bolt Borg-Warner/3.27
Re: Ignition Coil Replacement
That's what I kinda thought. Thanks!!
Thread
Thread Starter
Forum
Replies
Last Post
92camaroJoe
Tech / General Engine
6
08-13-2015 06:07 AM