Heads
#1
Junior Member
Thread Starter
Join Date: Jan 2003
Location: Phoenix Arizona
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Car: 79 ELKIE
Engine: TPI 305
Transmission: 700R4
Heads
this has probable been asked aready but here goes I have a fresh 350 would like to top it of with my 305 heads and TPI any problems using the 305 heads on my 350 . 305 heads are fresh as well
#3
Junior Member
Thread Starter
Join Date: Jan 2003
Location: Phoenix Arizona
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Car: 79 ELKIE
Engine: TPI 305
Transmission: 700R4
the 305 casting # is 14014416 and the 350 head # are 3973487 & 462624 on these casting can you tell me the valve sizes and chamber sizes as well?
#4
The '416 heads should work out nicely for you. They are 58cc chambered and should have 1.84/1.50 valve stock. They have decent port runners, and can be opened up to a respectable size.
I'm not sure about the '487 heads, but the '624 heads seem to come in a variety of configurations. Some might be good, some might not be so good. You might be able to find data at www.mortec.com or http://www.jimsperformance.com/headchart.html
I'm not sure about the '487 heads, but the '624 heads seem to come in a variety of configurations. Some might be good, some might not be so good. You might be able to find data at www.mortec.com or http://www.jimsperformance.com/headchart.html
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
92projectcamaro
Engine/Drivetrain/Suspension Parts for Sale
11
01-18-2016 08:00 AM