Serpentine Belt Brackets for an 87' 305

Reply Subscribe

Thread Tools

Search this Thread

11-19-2006, 03:42 PM

92IrocRS

Member

Thread Starter

Join Date: May 2006

Location: St. Louis, MO

Posts: 115

Likes: 0

Received 0 Likes on 0 Posts

Car: '92 RS ~ '92 Ranger

Engine: 305 TPI ~ 2.3 OHC

Transmission: 700R4 ~ Mazda 5-Speed

Axle/Gears: 10-bolt 3.23's ~ 7.5

Serpentine Belt Brackets for an 87' 305

I really need to find a company that sells a kit or something to change over my v-belt to a serpentine system. All I need is the alt., p/s pump, water pump, and obviously the crank, but I haven't been able to find anyone that sells them. Anyone know a reputable place to go????

Reply Like

11-19-2006, 05:57 PM

lakeffect2

Senior Member

Join Date: Feb 2005

Location: Rochester,NY

Posts: 617

Likes: 0

Received 0 Likes on 0 Posts

Car: 1993 Caprice wagon "Shammoo"

Engine: tpi'd 406, with P4 ebl EBL 730 ECM

Transmission: custom "4L65" swap.

Axle/Gears: 3.42:1 with posi

Can't say if this will help but...

I'm driving a 93 Caprice. The driver's side serpentine bracket supports the Alternator, P/S pump. The Waterpump and Crank are on the block itself of course. Keep in mind this was setup for a reversed direction pump. and you'd lilely need to throw an idler pulley in some how. The passenger side has rthe A/C, air pump and tensioner. If you are running a/c (which you did not mention) then it becomes easy to use both brackets, and a 95" belt, by passing the air pump.